slickdick

So I went into bios and I see this, that’s the ram voltage right? Sorry for the dumb question but I don’t want to fuck anything up, should I increase it then?

I got another bluescreen on my newly built pc while I was playing a game, the 1st bluescreen was a week ago I think. Windows is updated and I updated my GPU drivers yesterday, my chipset is updated, and my temps are perfectly fine. The bluescreen said "system service exception" and I think it said "dxgmms2.sys" next to it in parenthesis, I don't remember exactly what it said. I ran the Windows Memory Diagnostics tool and it said there were hardware issues detected, and after my PC restarted I got an error on the desktop that said "Your computer has a memory problem". So, did I receive defective ram from corsair or could it be another issue since dxgmms2 relates to the gpu? Besides those 2 bluescreens my PC runs perfectly fine, it boots up in like 20-30 seconds, no freezing, BIOS updated, etc. Specs: Gigabyte Vision D B550 Ryzen 5600x EVGA 3080 xc3 corsair lpx vengeance 8x2 3200mhz cl16 Corsair RM 750 80+ gold PSU Cruical P1 SSD M.2 NH-D15

okay i'll look into it thx

how?

Is it possible to have my case fan speed ramp up whenever the GPU gets hot? Whenever I play games on max settings my 3080 goes to like 75-78 degrees (that's with my GPU fan curve at 85% speed btw), I have an NH-D15 so I never have to worry about CPU temps. I heard it was possible on SpeedFan to link fans to GPU but that program no longer works, so what can I do, is it possible?

p500a, yea i guess i gotta contact them then

lmao.. yea i just spun it and it began working.. i just got this case with the fans brand new. so i should buy a new fan then?

I have an issue with my bottom intake fan that came with the case, it just stopped working after I adjusted the fan curves in bios, all my other fans work fine. I don't have my fans spin until 30 degrees, and this specific fan doesn't spin at all even at high temps. I went back into the bios and I would switch it to PWM, voltage, or auto and after a restart the fan would start working normally. But whenever I shut down my PC and start it up again without touching the fans the bottom one doesn't work, it begins to stall I guess, how do I fix this? 20201124_171049.mp4

Not sure if any1 cares but I got everything working, they updated the bios and i'm typing this on new PC ggs

well if the card is dead hopefully I can find another one before warranty runs out lol

damn so U think the card is actually dead? Shiiiiiiiiiiiiiiit

Follow up from this thread: https://linustechtips.com/topic/1271663-new-build-monitor-not-turning-on-impossible-to-solve/ Yo, so basically I tried to q flash plus on my gigabyte 550 vision d twice, 1st time I did it, I only had psu connectors and usb plugged in. I thought everything was good, built rest of pc, everything turned on expect the monitor. I attempted the q flash plus again but with newer bios update + all the pc components installed and I got the same result, only 1 issue though, A bunch of errors appeared on the LED like 15, 62, and probably another number or 2. Like before everything was running in the case including the gpus rgb but I’m worried that I not only bricked my mobo but my card too. After those numbers flash in the LED it stays on AE. I dropped my pc at microcenter for bios update, pretty concerned that it won’t post at all after update and that my gpu is probably fucked (error 62 has something to do with gpus right?). Am I fucked?

I think I might buy & return a 3600 then update from there or go to microcenter and have them do it, I'll update thread if everything works out, thx

yea i knew about this method but the q-flash way seemed like less work lol. and tbh i changed my mind at last second and had gpu in. with that being said, you still think my mobo has a chance of survivng?

Welp, that completely bricked my motherboard.. awesome. A bunch of error numbers showed up on my LED and the monitor still has no display. Now I'm worried my other parts are damaged now. FFS