Zer0mavrick

SLOBs and OBS are basicially the same thing. So I wouldn't count the other as a 100% way of "trying different software". Can you try fsplit or another? I pretty much help streamers on a daily basis with stuff like this. If you want you can have them add me on discord and we can talk over chat as it's way easier than this

You may have actually done it. It posted when I did what you said. LOL I literally had just given up and ordered a new motherboard. Msi Z390m gaming edge. I'll run tests and see if it's even stable. Edit: it set trtp to 12 and tWR to 24.

What is mobo setting gear down?

I actually had an even number set for the 15CL timing. I tried both of those. It talks about that in the Integral. I'kk try loosening the TRDWR timings and leave the others to auto. I'm not using one to control the others.. Am I wrong to think i don't have try these since it literally POSTED a few times already and I ran Karhu and TestMem5. The config seems pretty darn stable.

I'm currently having issues with my computer's RAM config. At one point I could post to 15 15 15 32, but now it won't let me. It only lets me post to 16 16 16 30. Even my 16 16 16 30 config seems to be a bit sketchy too. i have to restart my PC and reapply the profile for it to take affect? My only thoughts on why this could be happening: 1. A guy said to try a training of 1.55V (swore it wouldn't mess with anything) when i was doing the 15CL timings. 2. I was messing with an older 3000MHz kit and this technically happened after doing that (iv'e cleared cmos multiple times) 3. Buildzoid spoke about Gigabyte sometimes applying different CTL when booting and causing it to be unstable.. I don't know enough about CTL. I'm hoping just ASROCK Config could help with that and i can manually enter it? Below are screenshots of my configuration. ANY help is appreciated. I'm pulling my hair out here. I've thought that I had a stable config like 3 times already, but a day later the computer won't post to the same config. (my CL15 config was pretty much the same as this minus the voltages. The volts were 1.15V, 1.5V, and 1.55v Training)

Yeah but this doesnt do previous. Ut either just resets bios or down clocks my frequency

That's what I said in my previous comment. I've been trying to tighten timings and use 3600mhz because xmp and manual dont work. That's why I asked why it changes my ram frequency to 3200 when i go beneath 16cl

I recently bought 2 sticks of t force xcalibur rgb ram that is rated for 4000mhz 18 20 20 44 at 1.35v. My gigabyte z390m gaming motherboard (also have i7 9700k) pretty much refuses to run anything over 3600mhz... it just always resets the ram to 3600 when using xmp. When going manual I can boot to windows but its NEVER stable no matter how much I change my SA and IO. I just get errors out of the wazoo.even though this board is rated up to 4233. I've been told it's due to it being t topology. So I've decided to just work with 3600 and tighten the timings, it's at 16 16 16 32 1t now, but I want to go lower, but the motherboard just drops the ram frequency to 3200 anytime I make changes past 16.. am I doing something wrong?