Azzzzdy

it is staying around 1495-1500. So its working fine i just dont know what is wrong. Could it be i got a bad part or something

ok, so what could be the problem then and it is on D.O.C.P mode which clocks in at 3000mhz from 2133

My memory is CMK16GX4M2B3000C15 is this just barely fine? and yes its dual channel i dont have enough money rn to fix some stuff.

Hello, i did the bios but no improvement in performance, low temps, low usage, the same thing all over again. It just now clocks to 1935 core but for me 1935 is equal to 1365 and no performance increase. if this proceeds, i got warranty for a 3 years. Should i return the card when Covid- 19 settles down?

It keeps saying abort nothing changed

i am trying but it keeps poping yp with the primary commands and i cant update nor turn the protection off, How can i do it so it doesnt show the primary commands when i launch nvflash

so reinstalling or flashing the same bios would be fine? it would just put it back to factory reset like on a gpu?

ok sorry i am asking so many questions, i just get a little nervous if i mess something up with the graphcis card. so it can be any company with a little higher or a little lower say this one is 1680 and boost is 1755, the new bios can be 1755, boost: 1850 and if it were your opinion which company should i go with

ok, it just has to have the same clock as this, the rev 2 has the same clock speed

should i do it in safe mode and which bios the f80 or f50

I use afterburner and i havent played with the core voltage, should i?

Hello, I am using an rtx 2060 from gigabyte here are my specs ryzen 7 2700x gigabyte 2060 oc rev 2 vengance LPX 3000mhz (2x8) samsung qvo 1tb wd blue 2012 1tb 700w evga power supply bronze i put everything thing to stock on graphics card because there was no point because I was getting the same performance, overall, increasing clock or not. I don’t know how to fix this. Temps stay around 50-60 and stays around 50 usage but I don’t know how but it could be throttling somehow. Drivers are up to date. Chipset up to date. Bios for motherboard up to date. I have the F50 bios for the graphics card and it doesn’t pop up in the gigabyte website. The only one that does is the f80 and it won’t let me flash it. Get back to me as soon as possible please. thank you

16 go dual channel 3000mghz

This is better right?

What should I use to boost it afterburner or the gigabyte arus app

This is on all normal except high post fx motion blur is tiny, and texture is very high

I installed the amd b450 chipset, the Nvidia drovers are you to date let me get pictures of utilization

.

I will check utilization’s and temps in a little but I forgot how to install chipset drivers can you maybe send me the link for it or just tell me what to look up. I am not home

Hello, when playing certain games like gta, fortnite, and others my games. I get low FPS in all here are my specs Ryzen 7 2700x at 4.0ghz Wraith Prism cooler(stock amd) Tuf B450m plus gaming Gigabyte RTX 2060 OC Rev 2.0 Corsair LPX 3000mghz ram ddr4 700w evga bronze samsung QVO 1tb WD blue 1tb I think my FPS is around 60-40 on all normal on gta 144 on fortnite but when I am looking at something drops to around 50. All low. I will send pictures when I get to go on my computer again

Ok I did that it now shows this, thanks

I can replace my ram should I should done the pc and take out one stick of ram so it’s 16, but for some reason it says dual channel

Oh and one stick of 8gb A-DATA DDR4 ram

My system has Intel Core i5 8400, TUF B360m plus gaming S, 16gb of Corsair DDR4 ram, NVIDIA GeForce RTX 2060, A (s)ATA/ATAPI Drives,

I have task manager open on my second monitor and it shows 100% gpu usage, 8gb-10gb usage for ram and 16% usage on the gpu(rtx 2060)