Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

ken_mcwilliam

Member
  • Content Count

    18
  • Joined

  • Last visited

Awards


This user doesn't have any awards

About ken_mcwilliam

  • Title
    Newbie

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. So a while ago I posted about a ram issue I was having, linux was only seeing 3.8GBs of ram out of my 6GBs i have in my system. I honestly have no clue of whats causing the issue, but some ideas. 1. it could be I have a some bent pins in my CPU socket preventing my bios from enabling the extra DIM slots. (yes my bios DOES detect the other ram sticks, just doesn't want to enable them) 2. I could have flexed my Mobo and that could be a contender for the issue. 3. I somehow scratched my Mobo's PCB are any of these likely reasons for why my bios doesn't want to enable the dim slots? and I did spend hours figuring out the ram layout, I went though my manual and when i did the 3 channel ram mode it just wouldn't post. i tried alternate lay outs. the only layout i could get to work in the single channel mode witch with 2 sticks is very disappointing https://www.gigabyte.com/Motherboard/GA-EX58-UD5-rev-10#ov my cpu is the i7 920
  2. Manjaro says the same thing. 3.8GBs. should I test if one of my sticks are faulty? if so, how?
  3. For the First command it's 5.4.0-7629-generic for the free command total used free shared buff/cache available Mem: 4025528 2987920 125692 403188 911916 389164 Swap: 4193784 2042896 2150888 I might switch to manjaro but when I went there my wifi was very slow. even on pop os. but I think i just need to updated the drivers when I get there.
  4. so sorry for the late reply I thought i posted this on reddit. 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 12) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 12) 00:10.0 PIC: Intel Corporation 7500/5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 12) 00:10.1 PIC: Intel Corporation 7500/5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 12) 00:11.0 PIC: Intel Corporation 7500/5520/5500 Physical and Link Layer Registers Port 1 (rev 12) 00:11.1 PIC: Intel Corporation 7500/5520/5500 Routing & Protocol Layer Register Port 1 (rev 12) 00:13.0 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 12) 00:14.0 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub System Management Registers (rev 12) 00:14.1 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 12) 00:14.2 PIC: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 12) 00:15.0 PIC: Intel Corporation 7500/5520/5500/X58 Trusted Execution Technology Registers (rev 12) 00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Curacao PRO [Radeon R7 370 / R9 270/370 OEM] (rev 81) 01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Oland/Hainan/Cape Verde/Pitcairn HDMI Audio [Radeon HD 7000 Series] 03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02) 03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02) 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03) 06:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) 3f:00.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers (rev 05) 3f:00.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture System Address Decoder (rev 05) 3f:02.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Link 0 (rev 05) 3f:02.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Physical 0 (rev 05) 3f:03.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller (rev 05) 3f:03.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Target Address Decoder (rev 05) 3f:03.4 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Test Registers (rev 05) 3f:04.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Control Registers (rev 05) 3f:04.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Address Registers (rev 05) 3f:04.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Rank Registers (rev 05) 3f:04.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Thermal Control Registers (rev 05) 3f:05.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Control Registers (rev 05) 3f:05.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Address Registers (rev 05) 3f:05.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Rank Registers (rev 05) 3f:05.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Thermal Control Registers (rev 05) 3f:06.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Control Registers (rev 05) 3f:06.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Address Registers (rev 05) 3f:06.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Rank Registers (rev 05) 3f:06.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Thermal Control Registers (rev 05) I have 2Gbs of vram But why would my GPU take ram from my system. I'm not using a apu. for some reason, when i play on minecraft on windows i get like 150 fps with small stutter. on pop os I get under 120. sorry not related but wanted to add it if that relates to vram on something. yes to my knowledge my gpu is updated
  5. my system IS indeed 64 bit. so how come when I look at my system specs on my pc it says it only has 3.8GBs of ram? again my setup is CPU -111-- my cpu is the i7 920 my os IS 64 bit. I have 6GBs of ram in my system. non of them are faulty
  6. I have 6GBs of ram in my system at the moment and it says i only have 3.8GBs on the about page I'm using pop os 20.04 my motherboard is the. I use 3x2GB sticks Ram my lay out CPU -111--
  7. hold that thought, theses are Ethernet, i don't have a network controller in lspci just Ethernet
  8. 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03) is what i got from lspci, sorry I must of did it wrong that day
  9. I'm convinced you never read the title. I'm running POP OS 20.04 the gnome version is 3.36.1 I'm running off a WiFi USB chip (witch it's says its a 150 mbs chip) (the router is close I'm right above it, its a 50mb down so I should be fine, my pc is not covered so there's should be not issues but there is) my specs are as follows I7-920 2.6ghz MSI AMD R7 370 2GB 4GBs 1666mhz Ram (although I have 3 sticks with 2GB each so why doesn't my system show that?) My motherboard is GB-ex56-ud5 vs 1 old tech I know but Right now I'm stuck with em till I can save up money and get a AMD ryzen build but here in Canada I'd be lucky to even upgrade my ram smh I even reinstall pop os (witch is my main driver, likely not changing I'm more familiar with it)
  10. this didn't help, i do the steps and in the terminal nothing happens, there's no output being shown
  11. I'm using pop os. 20.04 I double checked the drivers and there nothing else I can install. when I was on manjaro they made me do something with mirrors. Do I still need to do that on pop os?
×