Jump to content
Search In
  • More options...
Find results that contain...
Find results in...


  • Content Count

  • Joined

  • Last visited


This user doesn't have any awards

About ken_mcwilliam

  • Title

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. So a while ago I posted about a ram issue I was having, linux was only seeing 3.8GBs of ram out of my 6GBs i have in my system. I honestly have no clue of whats causing the issue, but some ideas. 1. it could be I have a some bent pins in my CPU socket preventing my bios from enabling the extra DIM slots. (yes my bios DOES detect the other ram sticks, just doesn't want to enable them) 2. I could have flexed my Mobo and that could be a contender for the issue. 3. I somehow scratched my Mobo's PCB are any of these likely reasons for why my bios doesn't want to enable the
  2. Manjaro says the same thing. 3.8GBs. should I test if one of my sticks are faulty? if so, how?
  3. For the First command it's 5.4.0-7629-generic for the free command total used free shared buff/cache available Mem: 4025528 2987920 125692 403188 911916 389164 Swap: 4193784 2042896 2150888 I might switch to manjaro but when I went there my wifi was very slow. even on pop os. but I think i just need to updated the drivers when I get there.
  4. so sorry for the late reply I thought i posted this on reddit. 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 12) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 12) 00:10.0 PIC: Intel Corporation 7500/5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 12) 00:10.1 PIC: Intel Corporation 7500/5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 12) 00:11.0 PIC: Intel Corporation 7500/5520/5500 Physical and Link Layer Registers Port 1 (rev 12) 00:11.1 PIC: Intel Corporation 7500/5520/5500 Ro
  5. my system IS indeed 64 bit. so how come when I look at my system specs on my pc it says it only has 3.8GBs of ram? again my setup is CPU -111-- my cpu is the i7 920 my os IS 64 bit. I have 6GBs of ram in my system. non of them are faulty
  6. I have 6GBs of ram in my system at the moment and it says i only have 3.8GBs on the about page I'm using pop os 20.04 my motherboard is the. I use 3x2GB sticks Ram my lay out CPU -111--
  7. hold that thought, theses are Ethernet, i don't have a network controller in lspci just Ethernet
  8. 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03) is what i got from lspci, sorry I must of did it wrong that day
  9. I'm convinced you never read the title. I'm running POP OS 20.04 the gnome version is 3.36.1 I'm running off a WiFi USB chip (witch it's says its a 150 mbs chip) (the router is close I'm right above it, its a 50mb down so I should be fine, my pc is not covered so there's should be not issues but there is) my specs are as follows I7-920 2.6ghz MSI AMD R7 370 2GB 4GBs 1666mhz Ram (although I have 3 sticks with 2GB each so why doesn't my system show that?) My motherboard is GB-ex56-ud5 vs 1 old tech I know but Right now I'm stuck with em till I can
  10. this didn't help, i do the steps and in the terminal nothing happens, there's no output being shown
  11. I'm using pop os. 20.04 I double checked the drivers and there nothing else I can install. when I was on manjaro they made me do something with mirrors. Do I still need to do that on pop os?