Foxtrot_Motel

Where?

Compressed air gets a lot of it. I also use a disposable acid brush available cheap about anywhere. Any small soft brush for getting into fan blades ect. I use plastic cleaner on exposed case parts inside and out, works good on paint and metal too on a soft rag dont spray in case. Good luck

I have attempted to reset windows 10 on a Microsoft surface pro. Wanted to have a wiped it with a clean w10 install. Backed up my files, proceeded to reset. got through the process it restarted to an AMI BIOS screen that wants keyboard input ie f12, esc to erase or not the TPM data in BIOS. Its a tablet no keyboard. Anyone have any ideas?

Thank you, already pulled the trigger on this one I like your PCPP build better, close though. Already have a coolermaster stacker with lots of fans and the overkill PSU also a 2tb hdd for archive. I plan on having 1 or 2 titles on my ssd.

Thx, I plan on upgrading again later to a 3600 and a 5700 xt when my budget improves.

found the answer LOL

thx for that Tristerin, it wouldn't be out of the question to put the rig in a small AC enclosure. Condensate is the main issue.

Anyway thx for the insightful info I will consider this thread closed unless anyone can recommend a solution to my hot shop enviornment vs pc.

It gets so humid you don't remove a shirt you peel it off...

Ok, looks like I'm screwed. Temps reach 95F with humidity @ 65 to 80 percent is common.

This 12k btu unit into a rack. No condensate?

I'm worried that ambient temps like this would be harmful pc component life span as much as performance. Might have to go Frankenstein on this. Gpu cooling will be needed as well.