Sumolizer
-
Posts
272 -
Joined
-
Last visited
Content Type
Forums
Status Updates
Blogs
Events
Gallery
Downloads
Store Home
Everything posted by Sumolizer
-
Thank for suggestion guys. I just want to ask one more question now. Q) My psu is Antec HCG 520w ( non modular) At review websites and in some unboxing videos I have realized that it has only 2 x 6+2pin PCI power connector. But in my case my psu got 2 x 6+2pin PCi and also a single 6 pin pci connector(Maybe that shopkeeper did something) Can this be the reason of gpu not getting enough power and shutting down?
-
So its a gpu problem?
-
So i was having problems after buying a RX560.PC Shutdowns and restarts at itself. Like someone plugged it out and instantly he plugged in. I first thought it was my PSU. I RMA it and got a good antec one. Then i though it was my MB I changed it as well also the ram sticks. Now it narows to my GPU. I ran the Furmark test and the pc crashed. I stil have a local warranty Should i go for it?(The shop is very far thou) Should i opt for a 960 2gb instead of that RX560?
-
I just replaced this with Cooler master Elite Power 400w and my cpu is very very old it is Core 2 quad Q9650 and gpu is Sapphire RX560 4gb
-
Antec High Current Gamer 520w
-
Thnx But i think the swabs wont be able to clean that.
-
Thanks Just a quick question Do you think this might be causing problems? And can you give me any tip of removing paste from circuit board?
-
So my pc was restarting under load . I changed literally everything (Mobo , PSU , Ram) except gpu. Can gpu be the culprit ? Also It is rebooting like someone plugged it out from outlet and then instanly plugged it in/ Another detail : PC was running fine until i messed something up. I changed the gpu thermal paste and the paste got stuck on the pcb of gpu (Small type of thing). Can this be the reason? (Sorry For Bad English)
-
So i have a local warranty and i can exchange my RX560 4gb for a GTX960 2gb. Should i go for it?
-
I have replaced my Cooler Master Psu with the Antec High current gamer. I didnt did that No pins are bent Yep applied Thermal paste about 20 times I cant get that now but i think pc doesnt reboot with integrated graphics
-
WIll try. Meanwhile i am also thinking that maybe my motherboard is the reala culprit
-
Nothing is been good. I tried the reset button advice that you suggested But didnt worked. And also i am gonna share one thing When the pc was good I just pressed the reset button while i was browsing. Did it affected it?
-
Maybe Maybe the pc shuts itself off due to the fact that i use a 3 pin to 2pin converter (Universal) on the power chord of pc Can it be due to that? Bcz that thing is cheap AF only for 10 cents
-
Thanks
-
I currently have the Q9650. I just got an option from a seller to exchange. BTW What about A8 ? I dont know the exact model
-
So help me choose between these 2 cpu Note: Any of them will be paired with a Sapphire RX560 4gb
-
Guys idk whats happening But now the pc is shutting down without any heavy load. Just light browsing is causing crashing
-
Can it be due to Wire extension (That i am using to plug my power cables) ?
-
The psu model is Antec HCG520. There is only one 12V rail delivering 42 amps(Not quite sure) total of 480w
-
will try Thnks BTW
-
Whats this?
-
I upgraded my system before installing RX560. I mean i changed my PC. is there a way for testing PSU without that VOlt meter or DMM?
-
Its the shutdown you mentioned firstly ( Someone Plugging out PC) The pc has no dust as of now (There are some dirty areas on motherboard
-
Yes it on the motherboard. IDK what it states. I reapplied the thermal paste to cpu and now it is in good temp. I hope pc wont shut down now
-
now the cpu is not reaching that temp. But still system is shutting down. And also i notted that Before turning on (While the power chord is plugged) A red light is blinking on and off. While after turning ON the red light is on (Always)
