MitchKelly1993

bump

hey guys have an AMD system and in need of some help had bios version f11, opened ryzen master and blue screened. (x570 ultra - gigabyte/aorus) after which got PC back into running and noticed bios had reset back to F3 re flashed and went back to bios f11 but noticed that it was trying to force ram to OC to 3600mhz even if XMP profile was enabled or disabled. could only get PC to run with 2133mhz (default) PC seemed fine and then the following day it crashed and noticed it went back to bios ver F10 and had tried to make ram go to 3600mhz again, after some googling i replaced the CMOS battery and it now seems fine, XMP profile back to being enabled @ 3200mhz however, RGB fusion (i know, i know) now acts funny, when on colour cycle the ram flashes as if the LED's are on their way out, but when in static mode its fine, also using G.Skills software the LED's also work fine as they should. but when trying to control mobo/ram/GPU etc singularity rather than a "universal sync" nothing matches up, the GPU doesn't change colour, the colour cycle of the different components/fans don't match up and it looks tacky, does anyone have a fix for this? cheers. other PC spec info incase: gigabyte 5700 xt GPU ryzen 7 3700X - coolermaster AIO X570 ultra Trident Z 16gb 3200 mhz cooler master MB520 case 256gb SSD 4tb HDD

bump. anyone familiar with the aorus engine and making macros?

yes, but ive tried setting the side buttons to macro and tried setting up the macro but i cant seem to get it to work properly, or it just reverts back to default (forward/backwards)

hey guys. recently I've gotten a new mouse and its a gigabyte aorus M3. now the aorus engine is new to me and i'm chasing up to see if anyone has a macro set for the side buttons on the thumb. that macro obviously being auto/rapid fire and can share the info on how to set it up or even upload (import/export) macro settings TIA

hey guys and gals. i have a ryzen 3700x and its not hitting its 4.4ghz like its meant too. it always hit 4.2ghz, highest its maybe gone is 4.21 does anyone have a solution to this? MoBo: Aorus x570 ultra BIOS: F10a RAM: Trident g.skill 3200mhz (overclocked to 3600mhz) 16gb (2x8gb)

cheers olympic champ i have cable sleeves coming with combs to give it that nicer look and rid of the default piggy backed supply look, aswell as a black LED strip as that was a 2nd hand one and is white

Had a few things for a while however changed mb and gpu PSU: 750w gold coolermaster GPU: Radeon 5700 xt Gigabyte OC 8gb MB: Aorus X570 Ultra CASE: coolermaster MB520 CPU: Ryzen 7 3700x CPU COOLER: coolermaster 240l AIO RAM: Trident G.Skill 3200mhz 16gb (8x2) SSD: 256GB HDD: 4TB SEGATE EXTRA: small led light strip to take away some darkness from the bottom of case

cheers man just went to 3400mhz in bios and ran a stress test on memory using aida 64 extreme and it didnt crash/blue screen me so assuming its happy. ill restart pc and take photos of bios settings. would this be easier in inbox rather than a forum?

cheers for the reply. https://www.pccasegear.com/products/37884 here is the link where i bought it from. is the info G.Skill Trident Z RGB F4-3200C16D-16GTZR 16GB (2x8GB) DDR4

hey guys and gals. looking at doing some slight overclocking to my system system consists of PSU: 750w gold coolermaster GPU: Radeon 5700 xt Gigabyte OC 8gb MB: Aorus X570 Ultra CASE: coolermaster MB520 CPU: Ryzen 7 3700x CPU COOLER: coolermaster 240l AIO RAM: Trident G.Skill 3200mhz 16gb (8x2) SSD: 256GB HDD: 4TB SEGATE now ive done some slight overclocking with the GPU via the adrenaline software and got the temps/performance where im happy with it. only thing is i want to push the ram to maybe 3600ish. the CPU overclocking im not overly fussed about due to auto boost etc but it might be something ill look into in the future. just with overclocking the ram im not real sure on what to do when it comes to voltage etc, i know that in bios you can pick whatever mhz you want to set the ram too but without doing the voltage its wasting time. anyone able to give me a quick rundown on what to do? so i dont add extra volts into the ram when i dont need too and dont destroy it in the process? cheers pic for attention

i check what drivers are out dated with it and then search them manually from the respected websites.

went back to them. aswell as 19.7.3 and still nothing. also dont have MSI after burner installed as never needed to use it but heard that also can cause conflict

everything is up to date. checked with driver easy. bios manually updated with flashing. windows has no new updates

cheers for the reply, i have yes and nothing had changed