Stueck0514

AFAIK the FCC limits it to 20cm max distance. No one that I know of makes them at this time. There were a few start up companies like wattup and ossia cota but I haven't heard anything from them in a while. They were looking at transmitting power across whole rooms at something in the high 5ghz range but they required their transmitter and receiver. The hardest part about things like the Qi charging is it is based on inverse square law, meaning that if you double the distance you end up quartering the power. To get through something very thick you need a much much bigger supply.

Thanks, I have HW Monitor and I need to pump up to 1.385v to run 5g with no avx offset. If you change windows to high performance mode it will sit at 5g no matter what I do, but when I change the power settings to anything else it only goes to 4.7 I had the option at the time between the 8700k and 9900k and I didn't see the 9900k worth the 175$ jump in price. Now a days it is even more ridiculous, to the point unless I find one for $2-300 bucks I might as well wait for 12th gen and DDR5. Has this worked for you? I went to balanced power mode and it still only rises to 4.7, even with core value 50 and 1.385v.

No problem, should work now.

Hey guys, I have gotten 5ghz on my 8700k before but when I go to power settings and set it to anything other than energy saver, it only boosts to 4.7ghz like a normal processor or to 5ghz 24/7 in performance mode. How do I get it able to boost up to 5ghz but still idledown to its 800MHz idle? 8700k 3200 32gb ddr4 ASUS Maximus XI hero wifi 360 AIO

Not sure what you mean, but I can click on the link? Or just copy/paste?

https://www.theverge.com/2021/10/7/22714550/youtube-rewind-canceled-controversy-creators-annual-recap Posting a link from The Verge because I feel it is more appropriate Anyways, do you think since Youtube canceled Rewind, should Linus do a rewind of LTT? Something like greatest bits, outtakes no one has seen, maybe a sneak peek at a big project for next year at the end?

No, but I was under the assumption that it would have lower heat output with the delid and liquid metal. My main concern is 1.4v, I know that causes a lot more heat.

Hello everyone, I have a question for you guys. This is the first time I have overclocked, and I think I am running into an issue. Here are my specs: I7-8700k @ 5ghz 24/7, 1.4v Fractal Design S36 AIO Asus Maximus Hero Wifi Z390 Corsair 4x8gb 3200 2x1tb nvme drives Asus rtx 2080ti 650w corsair PSU I can get 5ghz on all cores but only when I run 1.4v in the bios, but HWMonitor is showing a max of 1.42. I would like to get that down because my temps when gaming are hitting mid 70's. I have already did a delid with conductonaut liquid metal on the die/IHS and on the IHS/AIO. If I can get some screenshots of the BIOS settings I have, I can post them if that helps any. I followed this overclocking guide on youtube and I believe it hits roughly the right spots: https://www.youtube.com/watch?v=bD1Ze80GpLo If I lower the voltage below 1.38v, it boots to the login screen then BSOD's. Is there anything I can do or have I lost the silicone lottery that badly?

Already done and done. The new drivers for Nvidia Control Panel are no longer provided, even on their website. Even their tech support will give no other answers than get it from microsoft store. Could someone upload their nvidia control panel folder?

No it is not. I did a work around by changing the actual monitor settings Right Click>Display Settings>Advanced Display Settings>Display Adapter Properties for Display 1>List All Modes>3440 by 1440, True Color (32 bit), 120 Hertz Shame Nvidia control panel doesn't even want a link on their web page for their own software. This works for my refresh rate, just wish I had more customizable options for my 2080ti and monitor considering the money I paid.

Does anyone know where to get the direct link for Nvidia Control Panel??? It is now on the microsoft store, and no matter how I go about it, it will now download or install. I even "pay" for it and check out. Looked up previous drivers, uninstalled the ones I have and installed but no avail. I have done everything on here ( nvidia.com/en-us/geforce/forums/game-ready-drivers/13/291399/cant-download-nvidia-control-panel-need-serious-he/ ) and still NOTHING! I hate that I got a 2080Ti and a new 24" curved and cannot get it to 120hz! Anyone else have this issue and fixed it? Nvidia moving it to the microsoft store was the stupidest thing ever.

bump

Hey guys, is there an app for android phones that uses bluetooth and can help monitor my PC? Looking for something like HWMonitor but on the phone... I have found Remote System Monitor, but it goes through wireless and I don't want to hook it up that way.

Ok, followed this Youtube video: Got it set up how he says, and the boost clock is at 4.8 Currently CPUID has the cores running at 4796-4802MHz with no drop. Hopefully with a bit of small fft on prime95 I can have it somewhat steady. I am hoping to get about 4.9 steady, 5.0 would be perfect.