I am a latecomer to the water cooling party when it comes to water cooling GPUs. And last night was my first time putting a water block on a GPU and Iran into an issue that I am not sure about, so I stopped and came to ask you fine folks for some help/advice. I am wanting to put an Alphacool water block on my RTX 2080 ti FE. When I got to the part where I was putting on the thermal tape I ran into an issue. first, the parts that Alphacool told me to put thermal tape on are not the same as what was on the card OEM ( the OEM covered more places), they called for less. And second, even at that, there was not enough thermal tape given with the water block to do the job, if I tried to cover what was OEM and (even if I did not), the pictures of where to put the tape were right up into the part were it was an RTX 2080 just not a ti FE. The block itself fits and is the right one, just not the amount and placement of the thermal tape. So, my question do I trust where Alphacool said to place the tape and not worry and if not it is easy to see where the OEM had tape so putting more on is not an issue, but what thickness of tape do I use, because the OEM used 3 different types looking at the front and back of the PCB. Sending it all back is a huge issue for me seeing how I have a 1k GPU in pieces on my workbench and second and the biggest is I live in the great white north and getting it sent back and getting another would/is going to take a couple of weeks if not more. Thanks for reading this, and any help would be greatly appreciated.