btng

I am experiencing weird mouse lags that I don't know how to fix. When I run dual 4K monitors the mouse pointer is lagging sometimes. It seems to happen randomly but it is very annoying. If I just run one of the monitors there is no lag at all. I figure that with my current setup there should not be any problem running dual monitors. I have the latest mouse drivers, GPU drivers and monitor drivers. Any idea of what to do? My setup Monitor 1: Dell P2715Q Monitor 2: Dell U2718Q Processor: Ryzen TR 2950X GPU: Gigabyte RX 2080 TI OC RAM: 64GB Mouse: Logitech MX Anywhere 2S MB: Asrock Taichi x399

Managed to fix the problem with the help of this guide if anyone else stubles across the same type of problem: https://www.asrock.com/support/faq.asp?id=447

How can I update the BIOS without it posting?

I just finished building a new build and it does not post. I see the error code E6 which I can't find any info about in the manual. I have tried moving around and rotating RAM-sticks without any luck. My build: MB: Asrock x399 Taichi CPU: Ryzen Threadripper 2950x GPU: Gigabyte 2080ti Gaming OC RAM: G.Skill Trident Z RGB 4x16GB CL14 3000mhz (they are compatible according to Asrock.com) CPU Cooler: Noctua NS-U14s Case Fans: Noctua Case: Fractal Design Meshify C SSD: 1x Samsung Evo 1TB M.2 NVME + 1x Samsung Evo 250GB M.2 NVME PSU: Corsair HX850i Platinum I have googled the problem and have seen that some suggest it is not #6 but Eb which is not the case for me. It is clearly E6. When removing all RAM sticks I get the C0 error code instead. When removing the GPU I still have the E6 error code. Any suggestions of what do you? I realllllllllly would appreciate some help.

For you who have aircoolerand a GPU right under - how small is the gap for you approx?

Front to back.

I have a Noctua NH-U14S. Is there a recommended minimum distance between the cooler and the GPU? I guess they should not touch but is it ok if there is only a few millimeter gap between them or should I in that vase move down the GPU to another slot?

From the manual: Which is the "standard retail version" that they talk about here?

Which one does only spin when temps go over 60C? Exhaust?

I have a Threadripper CPU + a Noctua NH-U14S cooler. I have a few questions regarding the setup: 1. Is it recommended to run 2 fans on that cooler (one intake and one exhaust)? If so, does it make a big difference? Does the noise go up a lot with 2 fans instead of one? 2. I read in the manual that if I would go for the 2 fan option the exhaus should spin slower than the intake fan. How do I achieve this? Can I still do this with 2 NF-A15 HS-PWM or do I need to buy some other type of fan? Thanks a lot!

Thanks a lot! Much appreciated!

Sweet! So you are happy with it? Any other cons of that monitor?

Thanks! Have not seen any kind of cover or heat-thing with my motherboard.

I have an Asrock x399 Taichi MB. It has 3 slots for M2 SSDs and I have two drives to install. Does it matter which one of them I use? It seems that they will be under the GPU however I do. Also, I have heard that you should install one M2 at the time? Anyone heard the same? Why is that?

Why not get both a 4k and an ultrawide?