Miroshima

I have built many systems with D5 and never found limits of it. 
 
The biggest one is what I build in Corsair 900D and there is 2xEK CPU Block, 3xEK GTX1080 Block, and 2x480mm 45mm X-flow Alphacool rads. Absolutely no problems with that system at one D5 even half power. 

I have built many systems with D5 and never found limits of it. 
 
The biggest one is what I build in Corsair 900D and there is 2xEK CPU Block, 3xEK GTX1080 Block, and 2x480mm 45mm X-flow Alphacool rads. Absolutely no problems with that system at one D5 even half power. 

A little story about my custom build
 
Since i buy my first apartment i have dreamed of building custom desk PC for my system.
I have really limited space for computer, a table is only 135cm wide on the front of the table and 127cm back.
So there isn't lots of room for pc under the table and If there is big pc then there is not enough space for legs.
Nowadays Deskpc is quite "regular" thing, but this is full custom build and I think that someone could be interested about this one.
 
Custom loop stuff:
 
EK-FB ASUS Z270/Z370 Strix RGB Monoblock - Nickel
EK-FB ASUS Z270/Z370 Strix RGB Monoblock - Nickel – EK Webshop

MSI GTX-1080-Ti-SEA-HAWK-EK-X
GeForce GTX 1080 Ti SEA HAWK EK X | Graphics card - The world leader in display performance | MSI Global

EK-XTOP Revo D5 PWM - Plexi (incl. sleeved pump)
EK-XTOP Revo D5 PWM - Plexi (incl. sleeved pump) – EK Webshop

EK-HDC Fitting 16mm - Nickel (6-pack)
EK-HDC Fitting 16mm - Nickel (6-pack) – EK Webshop

EK-HD PETG Tube 12/16mm 500mm (2pcs)
EK-HD PETG Tube 12/16mm 500mm (2pcs) – EK Webshop

EK-CryoFuel Blood Red
EK-CryoFuel Blood Red Premix 900 mL – EK Webshop

6kpl ML120 PRO 120mm PWM Premium Magnetic Levitation Fan
ML120 PRO 120mm PWM Premium Magnetic Levitation Fan

2kpl Alphacool NexXxoS XT45 Full Copper X-Flow 360mm Radiator
Alphacool NexXxoS XT45 Full Copper X-Flow 360mm Radiator
 
Here are some pictures
 
 
First planning and modelling
 

After planning and modelling there it is just, drill, cut, grind, weld and few other things what to do..

Raf cutting with jigsaw.

and grinding.. 

 
Cutting space for knees with angle grinder And welding parts together.  (I'm not a professional welder )



 
Test fitting with old stuff..

 
Paintings white and black. I planning to paint inside with pearl white, but it is regular glossy white.


 
testing with some new stuff..

Custom EK-XRES 800 Revo D5 (Pipe is 800mm long) and threads are made with the lathe. Not sure about that light inside, this was only tested, there is much more to do if I plan to keep it inside.

A little story about my custom build
 
Since i buy my first apartment i have dreamed of building custom desk PC for my system.
I have really limited space for computer, a table is only 135cm wide on the front of the table and 127cm back.
So there isn't lots of room for pc under the table and If there is big pc then there is not enough space for legs.
Nowadays Deskpc is quite "regular" thing, but this is full custom build and I think that someone could be interested about this one.
 
Custom loop stuff:
 
EK-FB ASUS Z270/Z370 Strix RGB Monoblock - Nickel
EK-FB ASUS Z270/Z370 Strix RGB Monoblock - Nickel – EK Webshop

MSI GTX-1080-Ti-SEA-HAWK-EK-X
GeForce GTX 1080 Ti SEA HAWK EK X | Graphics card - The world leader in display performance | MSI Global

EK-XTOP Revo D5 PWM - Plexi (incl. sleeved pump)
EK-XTOP Revo D5 PWM - Plexi (incl. sleeved pump) – EK Webshop

EK-HDC Fitting 16mm - Nickel (6-pack)
EK-HDC Fitting 16mm - Nickel (6-pack) – EK Webshop

EK-HD PETG Tube 12/16mm 500mm (2pcs)
EK-HD PETG Tube 12/16mm 500mm (2pcs) – EK Webshop

EK-CryoFuel Blood Red
EK-CryoFuel Blood Red Premix 900 mL – EK Webshop

6kpl ML120 PRO 120mm PWM Premium Magnetic Levitation Fan
ML120 PRO 120mm PWM Premium Magnetic Levitation Fan

2kpl Alphacool NexXxoS XT45 Full Copper X-Flow 360mm Radiator
Alphacool NexXxoS XT45 Full Copper X-Flow 360mm Radiator
 
Here are some pictures
 
 
First planning and modelling
 

After planning and modelling there it is just, drill, cut, grind, weld and few other things what to do..

Raf cutting with jigsaw.

and grinding.. 

 
Cutting space for knees with angle grinder And welding parts together.  (I'm not a professional welder )



 
Test fitting with old stuff..

 
Paintings white and black. I planning to paint inside with pearl white, but it is regular glossy white.


 
testing with some new stuff..

Custom EK-XRES 800 Revo D5 (Pipe is 800mm long) and threads are made with the lathe. Not sure about that light inside, this was only tested, there is much more to do if I plan to keep it inside.