Jump to content

Seizan

Member
  • Posts

    86
  • Joined

  • Last visited

Everything posted by Seizan

  1. Been tried in Norway allready, link to an norwegian article (google translate should make it somewhat understandable): https://www.tb.no/ulykke-pa-e18-store-skader/s/5-76-1671038?seshat_browser_id=8cf23d36-3fcf-4eb1-8ef7-1e1128d7903d&seshat_client_unix_time=1641220184695&seshat_session_id=ada43601-06dd-4924-b40b-fdd8738f7d73 Driver was using tesla's "autopilot" and it crached right into the road blocking.
  2. Ye totaly agree with all this, but even if i set a voltage manualy it still says 2.041V. So i started to doubt my self if i was doing the correct thing or not, or maybe this MB and bios worked different from my earlier ones (still Asus earlier too tho)...
  3. Yo! My core voltage seems way to high. Idk how to check if my cpu actualy runs at that voltage, but i have a feeling it does cause of high temp spikes... Just updated bios to see if that helped, but it's still the same; 2.041V. In Der8auers vid(7min into the video) it looks more correct; 1.449V MB: Crosshair VIII dark hero CPU: 5950X pic my bios and a pic of a few sec stress test:
  4. a little necro maybe, but w/e Just watched this vid from Linus, think he sums it all up here
  5. So, i got this Vega 64 with a EKWB waterblock. I had 3 of them at a time, of different brand, so not sure if this is an XFX, MSI or a Sapphire... I remember i had issues with this one, maybe after some bios flash, iirc it happend when i tryed to flash it back after i had flashed it with LQ-card bios. After having used it as a book support in my bookshelf for a couple of years, i wanted to give it another shot today, but same as earlier:/ My PC wont read it and no power lights on the gpu are glowing... Is there anything that can be done to get it back to life, or shall i just put it back into my bookshelf?
  6. Had to do one fast OC too, while i was at it. Not gonna bother with trying more until i get a waterblock on it
  7. Yo! Anyone tryed OC on Radeon VII latly? I was in OC mood today and thought i should have a little fun with my VII and the latest AMD driver, 19.12.2, but idk what was going. w/e i tryed i couldnt get the core over 1750Mhz, well it peaked as high up to 1760! tho ? Is it the new driver that suck asses, something with my card, me that is just overseeing things, or??? Highest score i got today.... lol
  8. Ah good to have confirmed that i havnt lost my mind, yet XD (dont put this on the SB tho :P) thx for fast reply!
  9. tryed to fire up an old 64 i had lying around, well i was pretty sure is was an 64... but result on superposition it is named as a 56?! so hmm is me or superposition that is lost? lol (the 4440 is a non OC, just did a test in balanced mode)
  10. GPU is equally bad, yes:/ Yeah, so i tryed to do a good researh before i bought this new case. In this one, Thermaltake View 71 TG RGB, was supposed to de quite decent... Anyway as i mentioned further up in this thread, my new fans have arrived so gonna pick em up today and do some rearrangement in the case. Prob need to make some new tubing too then... lol
  11. I never liked to blow the hot radiator air into the case, i use case fans to suck air into the case and then rad fans to blow out. But that been said, just got a msg that my new fans arrived; Noctua NF-A14 PWM 140 mm, so gonna pick em up tomorrow and do some testing etc then. Thx reply @TheGlenlivet ?
  12. also just noticed that the flow arrows on cpu i marked at wrong direction.. lol the bottom pipe goes out, top pipe goes in.
  13. Nope, radiator fans are blowing out of the case. .. made the colors match each other, so like green outlet on cpu goes to green inlet on radiator. (made those colors cause sinse it was so, yeah, cramped)
  14. That is for sure, but the thing is that all i did was seting in a new loop, nothing else. So both cpu and gpu block have been on for like 2 months. And temps was much lower with my temporary radiator (pic in my first post).
  15. Yeah i use Ryzen master, hw info and gpu-z^^ Edit: and tose numbers are pretty much the same as the MB shows.
  16. @TheGlenlivet Belive its the die temp, the MB shows the temp on cpu. Here is PC specs: https://uk.pcpartpicker.com/user/MrSailor/saved/#view=Kd9Nqs
  17. Or is it the new radiator,https://shop.aquacomputer.de/product_info.php?products_id=3342, that sucks asses??
  18. Why i think it bust be something wrong i did when i build the loop
  19. Fans are allways running at max under load (due to the high temp.. lol) Pump speed running at 100% 4820rpm all the time.
  20. I belive the fans that came with the case is not the best to use on the gpu radiator, but they shouldnt be THAT bad... And i got two very good Vardar fans on the CPU rad, and still the CPU are hot.
×