Sting

I also Scrwed up....................OMFG and not what is posted in first post.........................WHAT A NOOB I AM my Current Setting are: My Current OC Setting are: CPU Clock Ratio..................:23 CPU Frequency .....(Ghz).....:3.91 Intel® Turbo Boost Tech.....:[Disabled] CPU Cores Enabled.............:[All] CPU Multi Threading..........:[Enabled] CPU Enhanced Halt (C1E)...:[Disabled] C3/C6/C7 State Support.....:[Disabled] CPU Thermal Monitor........:[Enabled] CPU EIST Function..............:[Disabled] Bi-Directional PROCHOT.....:[Enabled] irtualization Technology.....:[Enabled] Uncore & QPI Features [Press Enter] QPI Clock Ratio*................:36 QPI Link Speed* ................(Ghz):6.12 Uncore Clock Ratio............:x17 Uncore Frequency.............(Mhz):2890 Isochronous Support........:[Enabled] Base Clock (BCLK) Control*...........:[Enabled] BCLK Frequency (Mhz)*................:170 PCI Exxpress Frequency (Mhz)......:Auto CPU Clock Drive (mV)................:700 PCI Express Clock Drive (mV)....:700 CPU Clock Skew (ps).................:0 IOH Clock Skew (ps)..................:0 Performance Enhance...........................:[standard] Extreme Memory Profile (X.M.P.).........:[Profile 1] System Memory Multiplier (SPD)..........:x8 Memory Frequency (Mhz).....................:1,600-1,360 DRAM Timing Selectable (sPD) ..............:[Quick] Channel A, B, and C Standard Timing Control Cas Latency Time.......:9 tRCD...........................:9 tRP.............................:9 tRAS...........................:24 (All sub-timings on Auto for all 3 channels) LoadLine Calibration.........:[Level 2] CPU Vcore....................1.25000v....:[1.31875v] QPI/VTT Voltage...........1.175v...:[1.275v] CPU PLL.........................1.800v...:[1.800v] PCIE.........1.55v.....:[Auto] QPI PLL.....1.100v....:[1.100v] IOH Core.... 1.100v.:[1.100v] ICH I/O.......1.500v...:[1.500v] ICH Core.....1.100..:[1.100v] DRAM Voltage........1.500v......:[1.660v] DRAM Termination.0.750v.....:[Auto] Ch-A Data Vref......... 0.750v....:[Auto] Ch-B Data Vref.......... 0.750v...:[Auto] Ch-C Data VRef........ 0.750v....:[Auto] Ch-A Address Vref.... 0.750v...:[Auto] Ch-B Address Vref...... 0.750v.:[Auto] Ch-C Address VRef..... 0.750v..:[Auto]

Well skullbringer tell him i have a Sound Card seated in my PCE x16 slot from day one and the sound card works perfect..........

Yes it will only use the pin connectors needed to run

Apple Why becuase those fanboys always say "They have the best platform" until i remind them that there is 120 billion PC users compared to 1 Million mac users...............haahaaaaaa

Thanks Juretin I read that Piece when I was doing the overclocking. What i wanted to know more or less is if these setting are fine given the Temps I'm hitting and to tweek them if needed.

Hey Gang I think I might be having a few issues with a system I decided to overclock after having run at stock setting for 3 year (LOL). The Temps on the CPU are kind of worrying me as the idle temps are 48-50 and when I run prime95 the CPU temps BOLTS up to 90+ in less than 2 mins and I stop the test at that point. (I'm scared I'll Kill the CPU ) I wanted to get some feedback on if these setting are good or can I improve the temps by making a few adjustments. Here are my specs and OC settings, I hope I've included all the neccessary info. i7 950 @ 3.02 (4.01 overclocked) Gigabye GA-X58A-UD3R rev 2.0 Coolermaster Silent Pro Gold 1200W psu Noctua NH-U12P SE2 CPU cooler (Push/Pull Config) Corsair XMS3 — 12GB Triple Channel DDR3 Memory Kit (CMX12GX3M3A1600C9) 9 9 9 24 Rating: PC3-12800 (1600MHz) WESTERN DIGITAL 1TB 3.5" BLACK 64MB SATA3 WD1002FAEX WD 500GB HDD x 3 (Storage Only) EVGA GeForce GTX 580 Superclocked 1536 MB GDDR5 PCI Express 2.0 Creative X-Fi Titanium Fatal1ty Pro CPU Clock Ratio............................:20 CPU Frequency .....(Ghz)...................:4.0 Intel® Turbo Boost Tech..................:[Disabled] CPU Cores Enabled..........................:[All] CPU Multi Threading........................:[Enabled] CPU Enhanced Halt (C1E)....................:[Disabled] C3/C6/C7 State Support.....................:[Disabled] CPU Thermal Monitor........................:[Enabled] CPU EIST Function..........................:[Disabled] Bi-Directional PROCHOT.....................:[Enabled] Virtualization Technology..................:[Enabled] Uncore & QPI Features [Press Enter] QPI Clock Ratio*...........................:36 QPI Link Speed* ......................(Ghz):7.20 Uncore Clock Ratio.........................:x17 Uncore Frequency......................(Mhz):3,4 Isochronous Support........................:[Enabled] Base Clock (BCLK) Control*.................:[Enabled] BCLK Frequency (Mhz)*......................:200 PCI Exxpress Frequency (Mhz)...............:103 CPU Clock Drive (mV).......................:700 PCI Express Clock Drive (mV)..............:700 CPU Clock Skew (ps)........................:0 IOH Clock Skew (ps)........................:0 Performance Enhance........................:[standard] Extreme Memory Profile (X.M.P.)............:[Disabled] System Memory Multiplier (SPD).............:x8 Memory Frequency (Mhz).....................:1,600 DRAM Timing Selectable (sPD) ..............:[Quick] Channel A, B, and C Standard Timing Control Cas Latency Time.............................:9 tRCD.........................................:9 tRP..........................................:9 tRAS.........................................:24 (All sub-timings on Auto for all 3 channels) LoadLine Calibration.........................:[Level 2] CPU Vcore....................................:1.325v QPI/VTT Voltage..............................:1.275v CPU PLL......................................: 1.80v PCIE.........................................:1.50 v QPI PLL......................................:1.10v IOH Core.....................................:1.10v ICH I/O......................................:1.50v ICH Core.....................................:1.10v DRAM Voltage.................................:1.64v DRAM Termination.............................:[Auto] Ch-A Data Vref...............................:[Auto] Ch-B Data Vref...............................:[Auto] Ch-C Data VRef...............................:[Auto] Ch-A Address Vref............................:[Auto] Ch-B Address Vref............................:[Auto] Ch-C Address VRef............................:[Auto]

Very nice tips and this did inprove my start up time ALOT!!!