Joshawa

Lmao i work for Comcast and our security systems have literally caught a customer's neighbor murder his wife so something is better than nothing.

Would really appreciate any ideas or suggestions with this issue

Hi all, I don't really post that often but I really could use some help. I have an awesome TV, it's a TCL 4K 50" Tv. I'm trying to connect my PC (Ryzen 7 system with 2 1080 Tis) to this TV, and display over HDMI 2.0 to my TV at 4k60. My TV let's me dictate that I want the HDMI port to run at HDMI 2.0 standards, so I set it to that. My PC recognizes this and allows me to turn things like HDR on within the settings, and my PC detects the TV still when I have the TV set at HDMI 2.0. However the TV asks if any signal is coming through. I checked the HDMI cable I bought on Amazon, and it says it's rated at HDMI 2.0b speeds (Cable Found Here) I know my gpus are capable of it the TV is set to 2.0 and the HDMI cable supports it, but I can't get it to work. I was able to get it working properly when I originally set it up, and since then the only thing that's changed is I updated my driver's. Any suggestions would be most helpful, if I missed any relevant info please let me know. The TV does get a signal when I set it to HDMI 1.4 and it runs at 4k30. Thank you all in advance

It was the CPU, new CPU in and baddah bing baddah boom good as new what even is a bsod. Thanks all for the suggestions.

I really don't think it's the drives, because if the bootable USB dies in my computer, but works in others, that makes no sense. Since it's a different bsod every time I think it's the motherboard bus

So this is going to be longer because I've done a lot of troubleshooting. I get different stop codes when I try to boot into any of 3 options. 1 my primary NVME SSD, my backup SATA SSD (I kept a copy of windows on in case my NVME drive died), and finally both a retail Microsoft Windows 10 USB as well as a home made windows 10 USB.If I try to boot into any of these, even the USBs, I get one or multiple of the following stop codes:page fault in nonpaged areakernel security check failurebad pool headerBad pool callerAs well as a couple other ones I failed to jot down.About my system:Ryzen 7 1800x CPUASUS Crosshair VI HERO motherboard32 GB Corsair vengeance LED RAM (1.2 v, running 2133mhz)2 EVGA GTX 1080 Ti graphics cards in SLI1 NvME SSD, 2 SATA SSDs, and 2 SATA HDDsEVGA 800W gold PSUI've tried:Taking all but one stick of RAM out,Changing each single stick into the same slot (Then each stick into different slots)Taking all but one GPU out, Using the other GPU in the same slotResetting the CMOSReflashing the bios (twice)Reinstalling windows (I get a bsod on the USB).Using different (known working) RAM, still get the bsod.I desperately need help. The computer was working just fine one night and I came home yesterday to see it stuck on the ROG logo boot screen.One last thing to note is that from time to time, without changing any hardware the PC will get stuck on the bios rog screen and never move, but on a hard reset it will proceed into windows recovery where it gets the stop codes. I get a 0d q code and it fails to move past the the rog logo, but then i reset it and it goes in to bsod. Thank you all for your help. I know from the bsod post that the memory dump is requested, however i can not even get in to get to it unfortunately.