Jump to content

huskyhunter47

Member
 View Profile  See their activity

  • Posts

    25

  • Joined

  • Last visited

Awards

This user doesn't have any awards

Contact Methods

  • Discord
    HuskyHunter

huskyhunter47's Achievements

Newbie

Newbie (1/14)

1

Reputation

  1. huskyhunter47
    I did check to see if any contacts were shorting and nothing was there
  2. huskyhunter47
    So i was having double clicking issues so i decided to get Kailh GM 8.0 and solder them in. when i plugged in the mice the G logo started blinking fast and couldn't move the courser but the buttons works just fine. I did some digging and found that the mice might be stuck in bootloader mode so thinking maybe a firmware flash would get the mice in normal mode i tried flashing the older version 90.2.17 but it said the mice is up to date on the mice the firmware version is newer 90.3.20 which i cant find What I tried Cleaning the sensor Soldering the old switch back in
  3. huskyhunter47
    Hi, I have AOC i2369vm. So here the story, While the display was in use i noticed white corners every time i turned on the PC after 5-10 minutes it would go away, then i started noticing ghosting after a week or 2 a line in the middle appeared, So after few days i opened it after some digging i found the problem it was the panel itself so first i tried rubbing one of the flex wire the line went away for a moment then i tapped it with my finger few times and it went black. I tried turning it of after few days now even more lines popoes up after turning on the display and keeping on for a while the line does go away but the display stays black. ? . it was a gold flex wire as shown in the pic. Thanks in advance. Any help would be appreciated.
  4. huskyhunter47
    Thanks for your reply its not only with steam jdownloader2 origin speedtest.net all show 500KBps it should be 1.2MBps
  5. huskyhunter47
    Hi everyone, I am having some issues with my bandwidth.i have 10Mbp/s connection.If i try to download a game through steam i get 3Mbps its the same with other clients too.I tried speedtest(dot)net i get 3Mbp/s.But when i try to watch a video on youtube or download files using JDownloader i get 10Mbp/s. Things i tried- Plug in the lan cable directly to my PC Ethernet port. Booting windows in safe mode. It would be a big help if anyone can help me solve the problem. Thanks in advance.
  6. huskyhunter47
    oh i totally forgot about that but i dont wanna keep that range laying around at least it will help me within my house.
  7. huskyhunter47
    Now i am sure its a proxy server fault cause when i try to load a page it says unable to find proxy server.
  8. huskyhunter47
    I dont have that important data but i am only worried about games,Softwares and animes I am okay with loosing other media files.Anyways thanks for the tip.
  9. huskyhunter47
    Yeah i do that but not enough storage to make a whole backup
  10. huskyhunter47
    Thats not my reason to re-install windows i most of the time do some research on the problem i am having and try to solve.Yesterday i was optimizing my partition then a powercut happened,the windows bootloader broke i couldnt fix it with bootrec after hours of searching i just had to unplug my all drives except with the windows in it then i ran bootrec /rebuildbcd and other bootrec command then it worked.I also have Kali linux installed just to feel like a nerd.I do play around with it,it breaks pretty easily but its fun.
  11. huskyhunter47
    Normally i connect through PPPOE using my username and password when i am connected to my router.When i am connected to lan i use dial up connection.ISP connected the airgrid to another AP to which i dont have access to.
  12. huskyhunter47
    Hi everyone, I have Ubiquiti Airgrid M5,i wanna turn Airgrid to router so i can reach my internet from anywhere within 2km because where i live i dont find hotspots anywhere near by.I cant seem to get router mode to work with PPPOE connection,i think its my DNS i tried tracing but i get NaN,also tried pinging google it fails immediately.Here are my settings.
  13. huskyhunter47
    I would like to know what you do to make your system that stable even after years i just add so registry entries to take ownership of windows folder so i can read/write everything in C drive.
  14. huskyhunter47
    I dont reinstall windows like that i just move files to another partition and then install windows thats it.I want a reliable one.There was one time i formatted everything while installing linux making a dual boot system i used Active @ Undelete.I uninstalled that software because i couldnt recover .ISO files.
  15. huskyhunter47
    Thanks for the recovery software i used steller phoenix.Ill try out Acethinker.
×