Stin6667

Should I get this to help with the heat?

Thanks for the reply. But unfortunately, ( correct me if I am misunderstanding) the only 2 devices ( soon be 2) that will use 10gbe are both rj45. Are their Dac to rj45 adapters or cables?

Thanks for that, But unfortunately the only sfp+ ports the switch has are next to each other. So in other words I shoulnt use them and wait to get a proper 10gbe switch?

Thanks for the reply!!! I have tried looking into it. The earliest I saw on issues relating to the unit were from 10 months ago. And some have narrow it down to either cables and or bad firmware. I will keep this in mind as I have already gone and purchased it yesterday. I will put it in a well ventilated room. (praying that will work) Thanks again for letting me know!!!!!!

The page I found https://www.ebay.com/itm/186305983093?itmmeta=01HQ4Q9R0MCH1YDD0TGVS3EM7M&hash=item2b60b3b275%3Ag%3Af9wAAOSwzetlu2v-&itmprp=enc%3AAQAIAAAA4CwY%2BJ9FWYt%2FVUEspkdAz3MQpQUtxyo%2FtydX02olgrq3ZyBnLUM3OPWXEhB90V2yDOF7BJjX34DGLMV9vbbQ6reXNQYnv7PXQmSBapi9vp6wQifpKj%2FTPcRTaWxjOrRJEl1CZN%2F8vrKFWKizzgXWAxThnqFTNzXn0sQB%2FUeX5ABThRghNzG8xJA9z5sNfgeIWDiz9pTCB5KlE%2FpxGdSAFn4PAxB%2F0UJzR%2FPIfzes%2BUj5mYUi8c%2FG5a%2FB2%2FIdwp0N1Ie4vQCs865nGJk5OWOjczxc81LrgYlUsduKxdtHHThk|tkp%3ABk9SR7KAp5e5Yw&LH_BIN=1

Just my 2c. Not bad. But for that budget I would go used, you would get better bang for your buck. I would get a used Ryzen 3600. Only 5 dollars more ( Just a quick look) Good luck with the Build!

Good day, I am planning on getting the Ubiquiti UniFi Enterprise 8-Port. The one with 2.5gbe, now I am still new to networking. On that switch there are 2 sfp+ ports now my entire network is rj45. Only the NAS and the Main Rig will have 10gbe. I was hoping I can put in a adapter in those 2 ports in the switch and just run rj45 cat6 cables (as they are about a meter apart). Now I have been reading and I found out using an adapter causes the switches to heat up. will it be a problem if I use both 10gbe ports (using adapters)? Thanks J

Good day, Thanks for reading my post. I recently been having problems with my tv and jelly fin. Some come content started to lag (other devices didnt have this problem). I recently found out that most TVs only have a 100mb rj45 port on them. Due to my TV being a c9 I can not disable the wifi. If you know how, please let me know. So I was thinking of using a rasberry pi3b and have it run the jellyfin client, and have the magic remote work as a mouse. Does anyone know if this is possible and how to go by doing it? Thanks J

Good day, Thanks for reading my post. So I have the synology 1821+ and wanted to put in either the 540 or the 550. Some recommended the 550, just before I was about to buy I saw that the compatibily list has another section Search by synology product, all the same nics as all the others I saw. No biggie. till I change it to 3rd party only the x710-t4 and the FastLinQ QL41134HLRJ are supported. 1 I dont want to upgrade to fiber just yet. And the x710 only has 10gbe/1gbe/100mb support. Has anyone tried the combination? Thanks J

I am not an experienced ebay buyer by no stretch of the meaning. This is my 2c. I would reviews and make sure it is covered under ebays money back policy. (Just a quick look on ebay) I saw this 3080 https://www.ebay.com/itm/155174974833?epid=9049155160&itmmeta=01HQ0D407G3AWPKQSNNCCM0DS3&hash=item2421263571:g:GQcAAOSw0jli8Sb9&itmprp=enc%3AAQAIAAAA0IMrsF2s6iixa5j6ZR1lhZTnFbk%2BaQLaqwOg%2BvSth8XS%2FwtyCKA1syPG7WxsZ9XmBn6nj%2B3qCwbTtbsbGOO9Hl2dPa%2BNqGZ2Kps8VV9ENDBjxbY5XhFftp%2FVRCG5NHAJlU2kAloeAisao%2FAnL0fNc6aywujCmMl%2B5JADLCN7gyhynmxv1ZdLeNM8I%2B0v2AJGD1dpFfup11CqEy54z3HN4QoBqexCuSRoqfkgAreJcwOSK59iSsBCgdmD9GFrXw6ICJmAJ41wjXcL%2BzbhkAc0mjY%3D|tkp%3ABFBMjISQjbhj Or this 3080ti (I think might be better) https://www.ebay.com/itm/225369874513?epid=7047696774&itmmeta=01HQ0DBJ7EM16GDNBZYF0DQCJ7&hash=item3479176051%3Ag%3AVCAAAOSwfldj~-bj&itmprp=enc%3AAQAIAAAA4PXAwKoqX5EYuvfbaz8SYQyF29JFe8mYaeH9f60gvRa%2FGwHfrjiqbdM0qc8jQnkWG43yHXTSACMTkQdw4%2FJpq27gMzBhzsIuAGu5S1WanD2yMhy4HLxfI%2F8CsftfluUeC15Go3DqpRgN1khHjo77qJJPgDMHYItJHrRAqbhapp0pd%2FGwsEjsPY37%2BUTZU00eltaHg22veFfLrIyMUt6G4bHEz59nUFy69kzNlkdvukgKG3CmKKoVn3zPMyl6eYoyYt5SVMElqFafMNXeLxbPj6KhycSmOyUgrUU5JqMkeVb7|tkp%3ABFBMgqSujbhj&LH_BIN=1 If you do go for the 4060Ti ( I would make sure it has 16gb) I think the 4070 is over priced. Just my thoughts Good luck!!

Good day, Thanks in advance for reading my post. So some background I live in an "Apartment". So there is built in cabling and they are all CAT5E. I am learning about networking, slowly... As I upgrade and build I am learning. I have a few questions ( and I will explain how I tried to set up my network, sorry I know it is bad. ) In the computer room I have daisy chained 2 mini switches. Which I am planning to upgrade to a USW-Enterprise-8-PoE ( I might need to add one more mini switch to that, not sure yet). That will be connected to a WIFI 6 pro or 7 pro (still undecided). I currently have asus router (which I have in AP mode, acting as just WIFI). I build a router thanks to level 1 Tech. I plan to put a 10gbe nic ( but as I am typing this out, I eventually want 10gbe internet but I will need to move to the city to get that, and that is not happening any time soon. However I can put in a 2.5Gbe internet which will cost about $10-20 more). I have a synology NAS which I would like to put in a 10gbe nic. So I have 2 questions. Is my idea okay? Should I go with the intel x550-t2 or the x540-t2 Thanks J

Thanks, I will do that now.

So a family member bought me a steam deck online. It came sealed in the case with a valve cable tie. Everywhere on the device I check it looks like the OLED version. Which is what it should be. How ever when I go in to the account and devices. I see 2 Steam decks. When accessing the 1st one from the top. It doesn't say any thing. But when I click on the second one it comes up with details of a 256GB steam deck. Which I or the family have never owned. Is there any way to check. I have even went on steams page on my pc, I can not find any thing that tells me what devices other than my pc that is connected to the account. Thanks J

Now I don't know how much the import cost will be, but here is one for a goodish price. https://www.amazon.com/XFX-Speedster-Radeon-Graphics-RX-68XTAQFD9/dp/B09NM7WMXG/ref=sr_1_11?crid=1XWZLO18QRRHV&keywords=6800xt&qid=1701478318&sprefix=6800%2Caps%2C331&sr=8-11

For esports this looks great, including the price. The only thing I would teak is, maybe if you could get a used 6800xt. I dont see any thing on pc part picker. But you dont need to. The parts you picked are great.