-
Posts
141 -
Joined
-
Last visited
Content Type
Forums
Status Updates
Blogs
Events
Gallery
Downloads
Store Home
Everything posted by WindowsXP16
-
You can fix a stuck pixel by playing this video for a bit until it disappears: Also another quick fix is to get a blunt object like a stylus and lightly press and keep tapping on the stuck pixel until it disappears. I have a Samsung Sync-Master from 2007 which showed the same issue back in 2011 for a couple of times and both fixes worked. I still use the monitor daily as a second monitor and it has not exhibited the same issue since.
-
I'm rocking an Logitech G440 hard mousepad. Although its a bit expensive at $35 AUD, I like the slippery glide it has when I move my mouse and its easy to clean, just a wipe from a wet cloth. Though it probably doesn't matter as much today, a laser mice works more optimally for hard surfaces while an optical works for all so keep that in mind. Of course as others said its all personal preferences.
-
freesync Vega 64 Freesync VS 1080/2070 No G-SYNC
WindowsXP16 replied to Jordan Payet's topic in Graphics Cards
Personally, I would take the vega64 free sync option if you are planning on keeping that card for a long time since there isn't much of a performance difference between the cards you are comparing. I had an AMD R7 360 gpu coupled with a Samsung CFG70 144hz freesync monitor and I was fairly happy with the fps, I can dip to around 40fps and it was still perfectly playable almost like 60fps. I did get an r9 280x (for free) and while that was better, I could easily switch back to the R7 360 with freesync (the r9 280x does not have freesync). -
2003 Apple Pro Stabilized Keyboard A1048 Review
WindowsXP16 replied to H0R53's topic in Member Reviews
I know this is an old post, but a useful software for that keyboard would be Sharp Keys for remapping the unusable buttons. You can remap the f13 to f16 buttons as well as correct the mapping for the numpad with the = button and clear button. I have my f13 mapped to screen recording, f14 to 16 mapped to media controls and fixed up the = button on the numpad. -
MS Access 2016 on Ubuntu
WindowsXP16 replied to WindowsXP16's topic in Linux, macOS and Everything Not-Windows
How reliable is office 2013 on wine? Encountered and problems on it?- 6 replies
-
- ms access 2016
- ubuntu
-
(and 1 more)
Tagged with:
-
I've been in the Australian Air force cadets.
-
MS Access 2016 on Ubuntu
WindowsXP16 replied to WindowsXP16's topic in Linux, macOS and Everything Not-Windows
But it would still run in emulated legacy bios mode, which means my SSD would have to run in ide mode making it slower and the boot times are also slower as it has to do the checks legacy bios modes does (ram check, pci device checks etc.). I mean with windows 10 that's what I'm currently experiencing as well. Besides I don't have a legal copy of windows 7 and I would like to now get the most out of my system.- 6 replies
-
- ms access 2016
- ubuntu
-
(and 1 more)
Tagged with:
-
I am just wondering if it is possible to work with .accdb files made using MS Access 2016 in Ubuntu. Currently I am using a MacBook Air 2011, since it is rendered obsolete by apple I installed windows 10 on it to give it further support. But Windows 10 is a bit unstable on this machine and it is also running in legacy bios mode in which the boot times aren't the best. I'm currently considering running Ubuntu instead as I can run it in EFI mode and should have better stability than running Win 10 with Win 7 drivers. At school we are currently working with MS Access 2016 that is why I have asked this question as I would also like better stability on my machine. I thought of using wine but I am worried of the possible errors it could produce, I have used wine on OSX before and one thing I learnt is that it isn't stable with some win apps. Edit: Using a virtual machine probably isn't the best solution either, on a 2gb ram, i5 2557M, 64gb SSD machine.
- 6 replies
-
- ms access 2016
- ubuntu
-
(and 1 more)
Tagged with:
-
yeah I gave up upon it, I threw out the pcb but kept the mounting bracket, I could use my Arduino to make a fan controller from scratch. Thanks for the help anyway.
- 14 replies
-
- bitfenix recon
- blown resisor
-
(and 1 more)
Tagged with:
-
https://www.newegg.com/Product/Product.aspx?Item=N82E16811997078 Looking at some of the reviews, people had the same issue as smoke coming out of their unit and not working. I did some poking around the diode, it turns out that the diode is indeed faulty, I was getting a reading on the anode to cathode and in reverse using my multimeter in diode test mode. The diode failed in short I think, but I was getting crazy values when measuring the resistance across it, like 1.9M ohms. The anode of the diode is connected to the resistor in which you might be correct that the diode must have caused this. I don't know weather its worth my time fixing it now, it probably has more problems that I think it has. What do you think the problem is with the circuit based of the information? Or there isn't enough info and I should just chuck the thing out.
- 14 replies
-
- bitfenix recon
- blown resisor
-
(and 1 more)
Tagged with:
-
I will get on testing that in the weekends, but what should I expect if the zener diode is faulty? Does it fail open or short? And if it does fail, what possible problems can it cause as a voltage regulator? I know its best to check and test it, but I don't have the time yet, I am also a novice in electronics but I do have some equipment.
- 14 replies
-
- bitfenix recon
- blown resisor
-
(and 1 more)
Tagged with:
-
A-ha, I thought of a great idea. I can just solder 2 wire leads connecting to a potentiometer from the broken resistor. Then I just set the potentiometer on high (say on a 10k potentiometer) and decrease the resistance slowly until the fan controller works again. Might not work but I will test this out. Message me if this is a bad idea, otherwise I'm gonna try it and see if it works. Thanks for the help.
- 14 replies
-
- bitfenix recon
- blown resisor
-
(and 1 more)
Tagged with:
-
I will also post this in other forms just to increase the possible results.
- 14 replies
-
- bitfenix recon
- blown resisor
-
(and 1 more)
Tagged with:
-
I guess that's one option, but I don't have a whole lot of resistor values to work with, I will see if anyone actually has an old one lying around where they can inspect the true value. But if it comes down to that I might have to what you said.
- 14 replies
-
- bitfenix recon
- blown resisor
-
(and 1 more)
Tagged with:
-
And the one across the diode is a smaller resistor.
- 14 replies
-
- bitfenix recon
- blown resisor
-
(and 1 more)
Tagged with:
-
The one next to it is a diode and a capacitor
- 14 replies
-
- bitfenix recon
- blown resisor
-
(and 1 more)
Tagged with:
-
Alright I have this BitFenix Recon that my friend gave me, which is broken. Apparently he just plugged it into his pc and poof, smoke came out, he knows nothing so he gives it to me for keeping. I checked the damage and came to a conclusion that a SMD Resistor blew up, judging from the black char around it. 1) My main question is how can I determine this resistor value, the resistor is badly blown so I can't identify the number. 2) My second question is does anybody know where I can find the circuit diagram for BitFenix Recon or its PCB diagram. I tried to look in the internet but cant find anything. Or better yet if anybody have one lying around if they can bravely check the value of theirs so I can replace the correct value. The resistor is labelled R28 on mine. Another note: The resistor is behind a soldered LCD panel so I haven't had a chance to check that side of the PCB, I am currently busy so I will have to leave that until the weekends to desolder the panel and further assess the damage. Here are a couple of pics showing my problem: edit: Title.
- 14 replies
-
- bitfenix recon
- blown resisor
-
(and 1 more)
Tagged with:
-
Well for SSD's you got to keep at least 10% space free for overprovisioning (garbage collection). https://www.youtube.com/watch?v=Q15wN8JC2L4
-
You probably get like a reflashed GT 710 with a dodgy "1080ti" like shroud.
-
Also I forgot to mention have you done trim on the ssd, and leave extra space for the ssd for overprovisioning (garbage collection). Atleast 10-15% space shall do it.
-
Doesn't look bad to me, do you have earlier benchmarks of that drive to compare?
-
Looking for a linux laptop
WindowsXP16 replied to Neutrideo's topic in Laptops and Pre-Built Systems
I know its not answering the question but why Linux exactly? What are you trying to achieve? -
I guess that might be the better option starting off small, it just looked like a good deal as it had so many components to play around with, originally my plan was to get an Arduino to create a HID keyboard using that as the controller, but before doing so I figured I needed to get familiar with the Arduino, hence the kit. I know the Arduino isn't the ideal controller board for a keyboard, but this is for a school project that I'm working on.