emtproject

The Problem: A couple of weeks ago my computer wouldn't start, absolutely anything; figured out that it was a dead motherboard so I ordered a new one (Asrock Z170 Extreme 6), and this weekend I installed it. At first, it wouldn't run due to an error code (19) which the book said is memory related so I followed the instructions of reseating everything, didn't work, reset the CMOS, didn't work, remove all RAM then reset the Cmos, Reset BIOS, it starts. It shows no error code, but when I start the computer and connect it to a monitor it says "Input Signal Not Found, Check Source and Wire": the monitor and wire do work. When I try to connect it to a tv that works it says Not Supported Format. I don't know what to do, at this point. Thanks System Configuration CPU 6700k RAM 32GB DDR4 Motherboard - Asrock Z170 Extreme 6 GPU - 1070 PSU - 750W Gold Thermaltake Windows 10 64bit

Not sure if this fits here. I plan on using the Black 2.0 shown in the anti rgb build on my r4 case as a cover. The doing a stencil with the word COLORBLIND BOX in a Miami vice style font with Plsati Dip Spray, Blaze Pink. Do you think this will work, like platsidip on the black, and would I need primer?

thanks

HP 10GbE Mellanox ConnectX-2 PCIe 2.0 x8 Low Profile Network Interface Card, 671798-001 666172-001 MNPA19-XTR

could you send me a link for a 1gb adabter? please and thank you

I recently picked up a refurbished 10gb network card, is there any connectors which go cat6a on one side and SFP on the other

I am adding an m.2 SSD to my rig, do i need to install another standoff or anything similar the case is an r4 by fractal design and the motherboard is a z170 Asrock extreme 4

Would a 1GB Adapter be worth is

ok thanks

I highly suggest Steel Series it has a premade questions to help find one good for you. I am currently using a Sensi check https://steelseries.com/gaming-mice for the guide and https://steelseries.com/gaming-mice/sensei for the ambidextrous claw I use

Would an Intel up to1000mbs Network adapter with PCI-E 4x be worth it? A local computer shop recently got a bunch of old business computers and are selling them for 40$. The router is just the basic router given for free would I be wasting money if I got the adapter. My CPU is an i7 Skylake and Motherboard is ASRock Extreme5 1Z170-The Specific Adapterhttp://accessories.us.dell.com/sna/productdetail.aspx?c=us&l=en&s=bsd&cs=04&sku=A2165191 or https://www.newegg.com/Product/Product.aspx?Item=N82E16833106034&nm_mc=AFC-C8Junction&cm_mmc=AFC-C8Junction-PCPartPicker, LLC-_-na-_-na-_-na&cm_sp=&AID=10446076&PID=3938566&SID=

This maybe hopeful thinking at this point. But I can see this being used for the deaf when teaching certin things like dancing or anything music realted really because the deaf person could learn to count beats on through the vibration

https://pcpartpicker.com/list/Zs38qk this build has everything you layed out in your orginal including the fans,SSD for boot,3rd Party Fan,and a 1060 6GB but a bit over budget, goes to budget if fans and 3rdParty Cooler are Removed or goes to budget if 1500X becomes 1500 - https://pcpartpicker.com/list/t6wq8K Build w/ AMD w/ 500G SSD https://pcpartpicker.com/list/gYRF9W Full Build w/PSU w/ Case w/HDD https://pcpartpicker.com/list/dvs8qk 570 vs 1060 6GBhttp://gpu.userbenchmark.com/Compare/AMD-RX-570-vs-Nvidia-GTX-1060-6GB/3924vs3639

This would work fine https://pcpartpicker.com/list/GYbk3F and better but it is unreasonable to do this

Do you need Micro ATX? What is your PSU size? What is your Case? The SSD is a waste of money in the build when you can get better memory, processor,GPU with a PSU that will work and a new Case Fully Compatible Builds Build w/ AMD w/ 500G SSD https://pcpartpicker.com/list/gYRF9W Full Build w/PSU w/ Case w/HDD https://pcpartpicker.com/list/dvs8qk Great Ryzen PC w/128GB boot and program SSD,1TBSSD,r5 1500X,better motherbord without PSU or Case https://pcpartpicker.com/list/ @DuVeXeph