Woofly94

The tubing is only 4 days old, you really think it's that bad? Any recommendations for the radiator? Is blitzing really neccesary? I could just run distilled water through the loop?

The pictures on that thread are exactly how my loop looks even the residue left over when drained, do you think this has caused damage to the rest of my loop? What would the course of action be here?

Sorry the radiator is made of Zinc not aluminium, I've never had an issue with this loop with Mayhems UV before.

Yes

I was using the Mayehm UV Fluid never had issue with, I'm not sure what you're asking what did I do? I didn't do any out of the ordinary for installing a loop. This is the tubing I used, you think this could not be compatible with Nano fluid? https://www.amazon.co.uk/gp/product/B00TR96UYA/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1 Edit: The whole loop is thermaltake. edit2: I should also probably mention that my signature below is years out of date.

There is no incompatabilities I know for sure because this is the exact same loop I ran for a year with no issues at all, the ONLY thing that has changed is the fluid I was using, and all of the issues I'm encountering are relating to that liquid (Mayehm Ice Dragon Nano Fluid) apart from this air pressure issue, which could be related to it as well.

Apologies for taking so long to get back to you I wanted to try something, so it appears that if I take off the bleed cap then everything is working fine, I've left the bleed cap off for 36 hours now and no coolant has disappeared, this has left me baffled but also might explain the issue, when I took the bleed cap off before the was a lot of air pressure, could it be that air is still finding it's way out of the loop but was trapped? If so why would that cause my coolant to disappear?

I noticed a big air bubble on the exit hole of the CPU but the water wasn't pushing the air, do you know what this is?

I am 100% sure no leaks, I did install the radiator upside down, could that be a problem where a big air bubble got trapped at the top and since air rises it takes a while for the flow to push down the air?

I've recently installed a new loop with Mayhems ice dragon nano fluid, this is the first time I've used nano fluid and I'd like some advice, my coolant is constantly evaportating in my loop, I topped it to the brim yesterday and there is now half a reservior but there is no leakage in the system, what's causing this? I've also noticed along the tubes there's lumps and deposits that's like powder along the tubes this is brand new tubing as well, I'm absolutely baffled as to what has caused this any help appreciated

I took my loop out few months back and I forgot to flush it out, I want to put it back in now but I've noticed limestone like build up on the tubing and waterblock, I've replaced the tubes but there is still this build up inside the waterblock and possibly the radiator too, I was wondering if it's still suitable to use and wouldn't cause an issue further down the line? I've tried running the loop with vinegar in for few hours it sort of worked, but didn't clear out most of the build up, is there anything that's better than vinegar that will clean the loop? If it's any help, I've only used Mayhems Pastel in the loop. Thanks

Tyvm I appreciate your help

Yes I know this, I am trying to understand what I'm looking for, is my assesment correct though? If I buy G1/4" OD 16mm Compression fittings am I correct in thinking I need 16mm hardline tubing? Also, could I miss and match different brands? Like a Thermaltake combo res with a EKWB waterblock?

I have the R360 fittings, I don't know what the measurements are, If I have a G1/4 OD 16mm fitting should I be looking for 16mm PETG Tubing? Edit: And could I miss and match different brands? Like a Thermaltake combo res with a EKWB waterblock?

But my fittings are much thicker than EKWBs, I assume the G1/4 thread is the bit that goes into the reservior and not where the tube goes in, is the 16mm measurement the part where the tube goes in?

Is all of EKWB products G1/4 fittings? Can I just buy any EKWB fitting and they will be the correct size? I assume they are since the waterblock and reservoir are all the same size

https://prnt.sc/k1gzdx Would you say that's all I need, is it all compatible?

Yeah I'm not interested in that kit, it doesn't suit my needs. Do you have a spreadsheet or something with specific parts for a loop for hard tubing? I might be asking too much but would be incredibly helpful, cost isn't an issue.

The Loop is still under RMA warranty, should I return it? What loop kit would you suggest or component list? Why is it a bad kit?

I have the Thermaltake R360 Loop but I want to make my loop hard tubing, problem is I'm confused by the measurements. This is what Amazon says T 1/2‘(12.7mm) ID x 3/4‘(19mm), but I can't find any PETG tubing with those dimensions, can someone point me to the correct tubing I need for the fittings and what I need to be looking for measurement wise. Thanks.

2 weeks ago, my D5 Pump was malfunctioning it would randomly stop working therefore causing my CPU temps to sky rocket while gaming, to the point of almost melting the tubes, I never managed to check the temps because I immediately turned off my PC, however it would normally work again when I rebooted the PC, however the last time it happened it didn't, so I decided to buy a new loop, skip foward to today the new loop is installed, however I'm getting no signal on monitor and Red CPU light and Amber DRAM light alternating, I've never had this problem before. I've changed the PSU and installed a new loop, nothing else has changed, I've not even touched the motherboard since it happened, I think the malfunctioned pump fried my CPU and motherboard, I've read up a lot on this issue and troubleshooted answers but nothings worked. Edit: I've managed to get rid of the CPU light by removing the motherboard and booting it up outside the case and re-seating the CPU, however the DRAM light is still showing and no signal on monitot.

2 weeks ago, my D5 Pump was malfunctioning it would randomly stop working therefore causing my CPU temps to sky rocket while gaming, to the point of almost melting the tubes, I never managed to check the temps because I immediately turned off my PC, however it would normally work again when I rebooted the PC, however the last time it happened it didn't, so I decided to buy a new loop, skip foward to today the new loop is installed, however I'm getting no signal on monitor and Red CPU light and Amber DRAM light alternating, I've never had this problem before. I've changed the PSU and installed a new loop, nothing else has changed, I've not even touched the motherboard since it happened, I think the malfunctioned pump fried my CPU and motherboard, I've read up a lot on this issue and troubleshooted answers but nothings worked.

Neither of those things, I think it just gave up.

It has short protection, it would shut itself off before it can damage my stuff, regardless I've RMA'd it anyway.

I disagree, things don't randomly break.