Jump to content

SmashinMachine

Member
 View Profile  See their activity

  • Posts

    510

  • Joined

  • Last visited

 Content Type 

Everything posted by SmashinMachine

  1. SmashinMachine
    Do you have a M.2 ssd from Samsung?
  2. SmashinMachine
    Do you have windows 1809? TRY to turn off fast boot in windows
  3. SmashinMachine
    Yes only this extender with diameter 16,75 mm will work on top In order to utilize the bottom recessed ports the use of EK-Extender G1/4 - Nickel extenders is mandatory! The extenders are not included! with EK Multiport But 2 Pieces should come with Reservoir Look at mine
  4. SmashinMachine
    Here I found a review https://forums.evga.com/A-review-of-the-XSPC-X20-420-pump-featuring-a-single-bay-reservoir-m2449005.aspx
  5. SmashinMachine
    THX. I appreciate it--- ?
  6. SmashinMachine
    Agree with that. I had a Mastercase 5 with Nemesis Black ICE SR2 420mm Rad + Nemesis GTS 280, I reached 45 degrees I have now 360 and 240 mm Rads and reach the same RESULTs.
  7. SmashinMachine
    Specs ASUS Maximus Viii GENE GTX 1080 @2100MHZ i7 6700k @4800MHZ 32 Gb Ram @3000MHZ Silverstone ST80F-TI Power Supply 2 x 970 EVO M.2 500GB EK GPU CPU and Ram Waterblock Aquacomputer M.2 Waterblock 1 Hardwarelabs Nemesis GTS 360 Rad 1 Hardwalelabs Nemesis GTS 240 Rad 6x Corsair HD120 Fans 1x D5 Pump Glass Res connected in Series with second EK D5 Pump Custom MDPC-X sleeving EK EK-CryoFuel Solid Azure Blue Coolant HEX GEAR R40 Chassis
  8. SmashinMachine
    @r34lj4k3 I had this issue in my build too I used lnlet port Port on reservoir’s top. This part is not intended to be used as inlet port It looked like a lemonade If you read the manual there stays Then I changed the inlet port Everything was OK Maybe u can use an internal tube with a multiport top to prevent these problem
  9. SmashinMachine
    Hmmm... I am really sorry that I could not help you Maybe the PSU???
  10. SmashinMachine
    Do you not read the news? https://wccftech.com/epic-fortnite-issues-meltdown-intel/
  11. SmashinMachine
    It helps maybe to clean the pis of ram with eraser.
  12. SmashinMachine
    Sorry man that I could not help you
  13. SmashinMachine
  14. SmashinMachine
    Method #1:1. Shut your PC down (if you're reading this guide, than your PC isn't working anyways) 2. Hold the power button until the PC starts and shuts down again3. Press the power button again, your backup BIOS should kick in now and should re-flash the main BIOS if there's anything wrong with it.Method #2:1. Shut your PC down2. Hold the power AND the reset button for about 10 sec, than release.3. Backup BIOS should kick in anytime soon now. Can you try these methods above? And Does it work??
  15. SmashinMachine
    U can use a NVMe SSD in the m.2 Slot.
  16. SmashinMachine
    MY Cpu Temps were fine too. And i ran intel programm too. Don't forget RAM and PCIe Slots are controlled by CPU. But I hope it helps what you do.
  17. SmashinMachine
    Method #1:1. Shut your PC down (if you're reading this guide, than your PC isn't working anyways) 2. Hold the power button until the PC starts and shuts down again3. Press the power button again, your backup BIOS should kick in now and should re-flash the main BIOS if there's anything wrong with it.Method #2:1. Shut your PC down2. Hold the power AND the reset button for about 10 sec, than release.3. Backup BIOS should kick in anytime soon now. Can you try these methods above?
  18. SmashinMachine
    They are quieter then the corsair HD140s
  19. SmashinMachine
    Yes I use it. Their name is nf-a14
  20. SmashinMachine
    I had this issue too 1-2 weeks ago with my gtx 1080. I tried Windows Clean Install, BIOS Flahback, other Ram(-Slots), Other PSU. Then I cleaned tthe paste and reseat my cpu and its gone.
  21. SmashinMachine
    I had experience with noctua nf-f12 and hd120 fans. They are both quiet in PUSH between 800 and 1200rpm. HD120 is a little louder in PULL
  22. SmashinMachine
    Do you use also liquid metal paste???
  23. SmashinMachine
    Hmm I am gonno with that my fans incl GGPU fans, airfilters and case. I had no problems since years
  24. SmashinMachine
    Reseat your cpu and look for bent pins in CPU Socket? I bet your gpu runs @PCieX8 not x16
  25. SmashinMachine
    Did you try to leave only one RAM and disconnect everything else (SDD,GPU,xtra RAM) too??
×