GMEEK44

Thanks for the cool contest, Linus

How many passes of Memtest86 will be sufficient? I have done a single pass with 0 errors.

I tested both sticks RAM separately and both passed. i put them in together again and for some reason I have not had an error in over 8 hours of burning in intel burn test. Not sure what the original problem was but either it is sorted out now or being a jerk and hiding itself

Well I have no idea what happened but I tested each stick of RAM separately on the intel burn test and they both passed. Thinking I had a similar Linus RAM problem where all sticks would fail in dual or quad BUT that is not the case as my system is running flawlessly an has been burning for over 8 hours now

It did pop up a warning that it had failed and told me to change things such as voltage and clock speeds down which should be at stock. I am trying each stick of RAM separately like Christopher below recommended

Ok I will try that thanks!

I have touched the CPU Overdrive in AMD Control Catalyst but I changed everything back to default there. AS far as BIOS I have opened it up to see what it looked like but I'm fairly sure I didn't touch anything. Like I asked before should I just load defaults and see if that changes anything or could that potentially balls things up?

Should I try loading the default in my BIOS? and if so should I load "Fail-Safe Default" or Optimized Default"?

Unfortunately it seems the test has failed

How many members does your clan have?

My username is GMEEK44 I do have a premium account so I can play with 2 people. I currently have several Tier 7 TD's and all premium TD's Since 99% of the time I only play TD I die a lot

Will do. How long does the process take at maximum (10 runs)?

Stock cooler but temps on cpuid were under 60C I think again stock settings I have not tried that killerx525

I am very new to computers I only know products not software or bios. In prime95 when I start up a test two cores fail within 10 min on my FX-8150 at stock I don't have prime95 installed anymore MB: Gigabyte 970A-D3 CPU: FX-8150 RAM: 2x ADATA 4gb @1333mhz GPU: XFX 7970 Ghz Edition (also failed before I got a better graphics card on a 6770) PSU: XFX Black Edition 1250W OS: W7 Home Premium Any ideas? Should I be concerned?