KINGDINGALING84

It is indeed the Project Nebula build from the CM Competition. I am a complete noob when it comes to watercooling and because of my stupidity I have had to completely change the loop....but it's a good job I had this problem becuase now it loooks even better It is an acrylic door from MNCPTECH but a company here in the UK distributes them called Kustom PC's based in Scotland.

Thanks! I will put a link to my build log up once she is complete. It was started on Overclock.net

I am so stupid sometimes. Although I have not tested this I am sure this is the problem. I am going to have to take my loop apart now and resize a couple of my tubes because of this. Basically it's about half a days work because I assumed this wouldn't be a problem. Whoops! Thanks for the advice. You cannot find any decent guides for a complete start to finish for watercooling with Bitspower. It's very frustrating

On the mod top, it has on one side with an inlet and outlet and on the other side a single inlet. As you will see from my pic, if you look at the pump closest to us, I am using the side witht he single inlet to actually push water through the loop effectively making it an outlet. Is this a problem? Does an inlet or outlet make any difference at all?

Yes this is my baby. It has been almost 6 months in the making. I have had a couple of nice builds but never done watercooling before. And now I am a little stuck. I am not sure what to do as I don't have any friends near to me that will know much about this!

Hi Guys, I am in need of some big help, I have a dual loop which I am trying to run. Thr pumps switch on but they just switch on and don't push any of the water around. I have tried switchingt the pumps on and off but they do not budge the water at all. I have not run them dry and the reservoirs are full and at the same level they were at before I even thought about turning the pumps on. The pumps are moving the water about inside the reservoirs but do not push any water around. I have built many PC's before but new to water cooling. The pumps I have are 2 D5 Alphacool and both sit in a Bitspower upgrade kit, single mod top and reservoirs. My build is here.... ">http://http://s95.photobucket.com/user/Austintacious777/media/Project%20Nebula/IMG_1246_zps4kn6zikn.jpg.html'> What could be causing this issue???

Cheers guys...all sorted. I wasn't sanding it down enough which was the problem. I wasn't getting the 45 dgree angle needed for the tube

Sure...this is my build log. The crystal link GPU tubing is fine but the E22 is giving me a real headache! http://www.overclock.net/t/1518614/build-log-nebula-cosmos-2-x99-build

Hi, I am in process of building a decent PC and have planned out my dual loop system, purchased all my fittings and crystal link tubing along with plenty of E22 tubing. I am really struggling to get to grips with the actual fitting of the tubing into my fittings. I have not done acrylic hard tubing builds before. The tubing just doesnt feel safe enough in between the graphic cards or anywhere else. It doesnt look far enough in. Do I need to sand the ends down and take a layer or two off to fit it properly or am I doing something very wrong? Any help or pictures/vids would be greatly appreciated. Thanks

Hi Guys, I have just started fiddling around with the new iTunes 12 (on my Windows 8) and the "Get info" tab has changed drastically, most of which is for the good. One thing is proving to be a bit of a joke though. I am very precise and OCD with the 10,000+ songs I have in a way which all the names, albums, genre of songs etc etc etc is all relevant to the album and if not in an album, the individual song will have the correct single artwork. I have artwork for everything and this has taken me bloody years to get right. Sad I know! Geek, Yes! With the new "Get info" tab, you can add artwork, but I can't see how you can add the artwork from a simple drag and drop from a image on a browser as you used to be able to do. It seems as though to add artwork, you have to have a dedicated artwork folder with the images saved in there to be able to add them to iTunes and the relevant song. This is an absolute waste of time and memory! It is very time consuming and to be frank, BS!! How can I add individual artwork to each song without actually saving this in a dedicated folder on my pc? All I want to do is drag and drop from google images and done. Not this faffing about! Any help would be great! Thanks

Asus ROG motherboards, especially the 'extreme' editions are quite frankly the only motherboard of choice for any gamer that is serious about overclocking and if you are buying top of the range high end components and not overclocking them then you really are an amateur. Asus motherboards are proven and tested to be one of, if not the most reliable boards you can get?!

Hi Guys, Does anyone have any information on when this is likely to hit the consumer retail market and how much a a couple of sticks is likely to be? Thanks! James

That's quite expensive but imagine it is going to cost a lot. Then again I am spending thousands on the hardware anyways lol

Nice job. I am looking to get the whole case themed "space". So it will be dark with a galaxy (or more), stars, planets, possibly a space craft or something. Singularity Computers did a bit of artwork on the back of his case which looks really cool although I want this all over the whole case. In the link, skip to 32.00 mins on the video and the blackened area on the back showing space, I want that everywhere. -

I am not 10 yrs old and this is not helpful