HakunaMatata

Alright Ill tell him to start ordering then.

http://ca.pcpartpicker.com/p/JPHzrH

This is a build for a friend just making wondering if anyone has any other recommendations or If its good to go.

Thanks.

Im considering doing a factory reset because I have read people that fixed it after a reset

Have you tried ipconfig /regsiterdns

 

It seems likely it's a NIC driver issue.  Try using a driver direct from the manufacturer (Realtek, Intel, Killer etc)

Tried it still no connection 

How many devices fail to connect? Is it just one? or several?

Just my PC with wired connection.

all other wireless and wired things work fine

and it only started after a ssid change on the router

Have you tried ipconfig /regsiterdns

 

It seems likely it's a NIC driver issue.  Try using a driver direct from the manufacturer (Realtek, Intel, Killer etc)

Ill try that command and im already using realtek which I have uninstalled and reinstalled 

Could this be your issue?

 

https://social.technet.microsoft.com/Forums/en-US/0204bc48-1647-4cfa-97f2-8ac3d6e02720/dhcp-client-fails-to-get-an-valid-ip-address-from-dhcp-server-windows-81?forum=w8itpronetworking

Already tried nesh winsock rest and got nothing 

also my anti virus is just security essentials and even after I close it nothing changes 

Do you use MAC filtering?  Or is your router just setup with DHCP and allows all devices?

I do not use MAC filtering

Try deleting your computer Mac address from your router

Where would I find the setting?

I have a dlink router

Alright,

Two days ago I changed the ssid on my wireless network. Since then the internet has not worked on my PC.The wired and wireless internet does work on all other devices on the network. The only exception is the wired internet on my desktop does not work. The internet says it is connected but cannot load anything. I cannot ping 8.8.8.8 but I can ping my default gateway.

What I have tried

Restarting router and modem

Restarting PC

Disabling ipv6

using ipconfig/renew and /release

setting a reserved IP

making my IP static

Changing IP

Using ipconfig /flushdns

EDIT forgot I also tried:

netsh winsock reset

​re nstalling drivers 

These are the erros from my event log

Event 1001 Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x00FFA3C08B72.  The following error occurred: 0x79. Your

computer will continue to try and obtain an address on its own from the network address (DHCP) server. 

Event 1002: The IP address lease 192.168.0.112 for the Network Card with network address 0x3085A98D99EE has been denied by the DHCP server 192.168.0.1 (The DHCP Server sent a DHCPNACK message).

Event 1003: Your computer was not able to renew its address from the network (from the DHCP Server) for the Network Card with network address 0x3085A98D99EE.  The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.

Full  event log

http://pastebin.com/RS6u5Mek

Any help would be greatly appreciated 

Hi I am looking for a cheap monitor to pair with the XL2420z

I would like to get a similar looking monitor physically that I could use for web media etc and get rid of my other cheap monitor

so far I am looking at the BenQ GL2460HM http://www.amazon.com/gp/product/B00IKDFL4O/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A3DWYIK6Y9EEQB

Anyone have any better recommendations for under $175 I am not very worried at all about the monitor specs because it cannot be worse then my 2010 budget 1080p

What I am mainly looking for is a 1080p 24 inch monitor that will look as identical to the XL2420Z as possible so they look good beside each other

1. Right click, open in new tab. Come on just middle click it.

2. People who use a closed laptop as part of the desk. I hate people who put drinks, ash trays and everything on top of a laptop.

3. People who don't do something the way I would do it.

any other ones to consider? at same price point.

The QNIX QX2710. It's a little over $300 though.

Does anyone have this. Do any korean moniters come with dead pixel guarantee

Just looking for ideas

FTFY

R9 290

Reason: Dogecoin mining

NOOOOOOOO YOUR WINDOWS 8.1.............................then im of no use

download a new wallet and transfer it to that wallet

Pretty much looking to move btc-qt Ltc and doge from ssd to F

Rapidhash is just started by a redditor and I switched to it from dogecoinpool and netcodepool

It also depends on the system your putting it into. The Windforce will need some decent airflow to run well unlike the reference one that will exhaust out the back. If your system doesn't have direct airflow/ exhaust from the gpu or your not sure its always safe to go with a reference design.

Why do you want the EVGA reference. I have the super clocked 780 and is great

It seems to be the same as before http://www.nvidia.com/content/newsletters/web/shield/shield-...

It seems to be the same as before http://www.nvidia.com/content/newsletters/web/shield/shield-...