ephuber35
-
Posts
35 -
Joined
-
Last visited
ephuber35's Achievements
-
Thanks MIXFUSED!! I'm really happy with how it turned out! If you guys liked this build please follow me as I have a very special project coming up soon featuring Ryzen! -
UPDATE TIME!! Alright below are some of the final photos. Video is being edited now and will be a little longer. I've posted these photos at the very beginning of the build as well so that you don't have to scroll through all the updates. Thanks everyone for following and I hope you enjoy these final photos. Thank you once again to Primochill for your support!
-
Howdy! I know it's been some time since I've updated this post but now comes the boring part of scheduling shoots and what not. But I am pleased to say that this Saturday is when I have the shoot scheduled for! I also took the opportunity to sleeve my pump cables to get rid of that AWFUL green and blue lol. Again, sorry for the crappy photos, just using my smartphone and don't have a good lighting setup yet! That will be next on the purchase list I look forward to providing you guys with these final photos and appreciate everyone who's followed this log!
-
UPDATE TIME!!! I don't know about you guys but I was not aware that Primochill does custom cables as well as other modding supplies! Primochill has been great to work with and they have graciously decided to send over some custom silver and black extensions for this build Thank you very much Primochill! We will finally be able to make this build look complete. I also have the photo shoot scheduled for either next weekend or the first weekend in February depending on when the cables arrive. For now, I'll leave you guys with this one photo Finished product is so close! I can see the light at the end of the tunnel
-
Hey everyone! So a couple developments. 1. The vinyl is here and is currently drying sorry for the crappy picture 2. Due to budgetary reasons the silver/carbon/black cables will no longer be happening. Maybe further down the line I'll pick them up but the budget ran over for this build. 3. The system is up so I'm currently working on the overclocks and benchmarks for it. It's coming along great! I can't wait to have this officially done and then I'll have the professional photos and video done
-
Alright! She's all put together, the vinyl is on it's way and the cables should be ordered soon! so close to the end of the tunnel! I'm going towards the light! lol.
-
lol, exactly! Most PSU's come with one. I think I have about 3 just laying around
-
It's a jump cable that's in a a female 24pin plug. To leak test you have to turn on the power supply to provide power to the pump but not the rest of the components so if anything leaks it doesn't short anything out. PSU's are designed to not turn on unless a connection is made via the 24pin connector. It basically completes the circuit. So that is there just for leak testing
-
Lmao!
-
I would like to correct a mistake in my last post, the finished product will be next MONTH, not next week! lol, custom cables take a lot longer to get
-
Thanks! Stay tuned, finished product should be next week and I'll have professional photos and a youtube video I'm going to keep the coolant clear, I think it compliments the theme of this build.
-
Lol, haha I'm glad you're liking it!! Almost done!! 3 months in the making!
-
Alright! Update time! 1. Loop is done! Love these Primochill fittings. They have a great seal. 2. Leak testing is also done :) 3. And even though it's technically not finished, I couldn't resist putting it all together and powering it up to get one glamour shot ;) 4. Still to come, the fluid is still pink.... >:( so I will need to get some mayhems blitz pro and deep clean the radiators. May also take apart the blocks again but I think I'll be ok without doing that as I've only been running clear fluid/distilled water for a while now. 5. Vinyl is being cut and shipped soon 6. Still need cable replacements. But for now, hope you enjoy these shots! :)
-
Hello All! Update time So it's finally coming together. I did about 3 coats of paint on the back plate and PSU shroud and then did clear coat and that's taken a lot of time to get it right! It still didn't turn out exactly perfect but it looks pretty good. So here's the PSU shroud painted and built: Here's the PSU shroud with back plate/res mount (excuse the finger prints) And finally, it's all starting to come together! PSU shroud in place, pump mounted, GPU in, and backplate and reservoir mounted. A couple things to note. 1. Sorry for the crappy photos, the lighting in my apartment is terrible and I have no place to take good photos due to not having a dining room table yet. Better photos are coming I swear! 2. The red cables are just temporary as noted prior in the build log. I'll be using cablemod cables and will be purchasing those some time next month. 3. The loop will be completed tonight so stay tuned for more pictures of those and I'll do my best to try and get better pictures! I may take it outdoors to use some natural lighting. Any tips or suggestions on photos would be appreciated! I have lined up a videographer for final photos and a video so that'll be exciting! Take care for now, expect the loop update tonight!
-
Thanks! I should have an update over the next couple of days. I ran into a couple of issues with the PSU cover that I've been trying to iron out but that updates should come fast here soon. I'll have the painting done and the loop done this week! I have to wait till next month to cables so the whole system is going to get put together and then I'll just swap out the cables once I get them.
