LovesLaus

@RAS_3885 - this is for a client, we don't force teams or zoom as the default. he is clicking on the +invitee icon and not clicking teams or zoom to create the meeting.

- in outlook i start a meeting - click invitees, in the body message teams would fill that in with the meeting information - i do not want this to happen - it use to use zoom as the default, but i havn't been able to figure out where the setting is to change this - disabling and removing from add-in does not help, as it would just add itself back the next time outlook starts back up

I have checked the scaling, and it set to default 100%. I have already tried to change the horizontal and vertical scaling via regedit, but changing them did nothing

Hi, I have a windows 10 and the desktop icon names are showing the full text name Attached picture label test. i have tried change the icon size via scroll wheel and the display settings, and right clicking the desktop. I also tried to change the spacing in regedit, but that also did not work test 2 is what icons should normally look like. Any suggestions on hot to resolve this will help. Thanks.

@Falconevo - yea i understand that it prosumers, which I don't mind, as I will need to eventually need to understand as well. Router right now - eth0 - was 192.168.1.1 - this was the original port i used to connect and setup the router eth1 - WAN port eth 2-4 - connecting to my devices i remoted to my router and changed the eth0 port to 192.168.1.1 to 192.168.2.10 ( which was not used by any device, and then the router dropped my network connection to the computer i was connecting to. so i just like to for the future to connect directly to my router in case something like this happens, at least this way i maybe able to resolve the issue instead of waiting to get home from work going to eventually setup a VLan for all my networked devices as well

@Falconevo - i dont think i have anything setup. all i done so far on the router, was the initial wan setup, and changing the ip address of eth00. that was when i got knocked off the router when i was remoting in. which i am also confused about, since the computer i was connected with was on a different ip address all together. all these new settings are exciting and confusing all the same time.

@Falconevo - Yea I saw that post, probably should of posted there as well. I tried to follow those steps, but I still wasn't able to get it to work

@wojtepanik - isnt the clould key only for the Unifi stuff??? I have a cloud controller setup already on a computer that Is connected to the router. but i am not able to connect to the controller software, and everything after the router has lost network, and i am unable to see any devices. vpn - do you know how to set that up direct only to the router???

I am rather new to the EdgeRouterX for Unquiti ( new to all these enterprise like settings and gear). Just tired of the commercial networking equipment. What I wanted to ask if there is a way to remote connect directly to the router? What I am doing so far is remoting to a computer that is on the network, and then managing the router from there. But I did a change before and I lost connect to my entire network, also means that I have no way to monitor my security camera. I will be away for a few days. Previously I was able to connect to my Linksys 3200 ACM via the linksys account to make changes. So if anyone can provide any assistant that will be great.

its been 3 days since the router change, and things seems to be working fingers crossed. Though now i have to figure out some way to remotely mange the router like how i was able to with the linksys router.

@rcmaehl - i think it my router, since it decided to self rest 3 times this past Sunday. Bought a Ubiquiti EdgeRouterX. Hopfully its no longer an issue. @Donut417 - it cable, though i am thinking of changing over to that sweet GB fiber

@rcmaehl i was using the wifi, i will have to test again with the Ethernet cord tonight, since that probably would have been better then wifi.

@rcmaehl - from the ping test only the top 3 disconnect.

@rcmaehl I will trying that out once I get home later @natzilllla most the ISP cabling is above ground, and a new cable was ran between my house and the main line. From what I check last time, it look good.

I would get disconnect intermittently randomly form internet. I have changed out my router twice now, i am using linksys wrt 3200asm with Unbiquiti AC Pro for the AP. the ISP has changed their modem 3 times. from their testing everything is fine. but of course when they are there and testing, everything is find and working. Its not just the wifi that drops, the entire network would all drop at the same time. they says it my router and AP, but i don't see how that can be possible. since i am still getting disconnected even if i am hardwired to the ISP modem. I also checked with the ISP, and the modem that I have will auto go into the bridge mode once i plug in my own router. the up time of the router was at 1440 minutes, but I have changed it to 100,000 minutes. I have hard reset all of my devices several times. At this point I have ran out of ideas on how to resolve this issue.

Hi, I did it as just an upgrade, so i am unsure what windows did with the installation. I did about 6 updates for windows 10 on the laptops that I have here, 3 of which are the same asus model, and this is the only 1 that is taking 10 mins to boot up. cordially, Alan Lau

Hi, I installed windows 10 on my Asus Ultrabook, and now the boot up time takes around 10 mins. When I was on windows 8.1 the bootup time did not take 10 mins; on 8.1 it took less then 2 mins. Its running with intel 4200u, 4Gb ram, HGST hard drive with a 24Gb sandisk cashe. Model Asus : UX302L I not sure what the problem is i have already try restarting a few times, fast boot has also been enabled. There are not alot of things that are starting up when booting up. Thanks for the help. Cordially, Alan Lau

my favorite thing would have to be the screen size and resolution.

hi, After a little bit a digging, the GTX 860m, seems to be around the same performance as the gtx 755 sli. http://www.game-debate.com/gpu/index.php?gid=2143&gid2=2017&compare=geforce-gtx-860m-2gb-vs-geforce-gt-755m-sli. For the best value i think the Lenovo Y50 has it in the department.

hi, all my favorite thing about the HTC ONE m8, is the inclusion of the SD CARD slot

cooler master if giving me the choice of either the ultimate or trigger z as the rma replacement

hi, i am not sure which keyboard i should pick. i had a cm storm quick fire tk red keys, which i sent back for rma. i now have a choice of either taking the quick fire ultimate brown keys or the cm storm tigger z in brown key. i am not sure which of the 2 keyboards i should pick. anyone who has advice would be great

Hi, i am trying to figure out which router would perform better in a apt building that my family owns and lives in . the router and modem will be set up in the 2nd floor so that the 1st and 2nd 3rd floor well get good coverage. my old router was wndr 2000, but that has given out and the range was not that good but it still covered a good part of the apartments, but has died now and searching for a new router. all the devices here are N Cable no wireless ac needed. the internet connection speeds will bed 50 mbps down 5 up mbps. i trying to pick out which router would give be the best range and through put for my apartment building. the budget for the router would be $150, might be able to push $200 but that is questionable unless that router is just that awesome. thank you for any advise that you can give me.

Hi, my netgear 3700 just died on me, i need advice for a better wireless N router, one that has good range and connection. thank you for any advice

http://www.amazon.com/dp/B00CPLGFM4/?tag=pcpapi-20 Amd A6- 6400k - $70 http://www.newegg.com/Product/Product.aspx?Item=N82E16813157464 ASRock FM2A88X-ITX - $100http://www.newegg.com/Product/Product.aspx?Item=N82E16811352033 Fractal Node 304 - $60.00 http://www.amazon.com/Seasonic-SSR-450RM-450-Watt-certified-Supply/dp/B00918MQ8G/ref=sr_1_1?rps=1&ie=UTF8&qid=1387946183&sr=8-1&keywords=SeaSonic+SSR-450RM Seasonic ssr 450rm $75.00 I also have spare 8GB of ram that I will re using for this build. Cost of this is $305 will these part work well as a NAS ? with a decent transfer speeds. i had a dlink 321, but the transfer speed was horrible on it around 10mbs mbps. thank you