Epicwhale

yes I read through your signature. that's the CPU temp, how do i measure the water temp? because when it's 90c one of the tubes is too hot to hold so I figured the water is that temp too. I also found out that when it's about 90c and I shake the tubes for 10 seconds the temperature instantly drops down to 40-50c...

Ignore what I previously said - after about 1 minute it goes up to 80c and then starts to go funny.. it hit 82c then slowly started to crawl down to 79.. then instantly jumped up to 86c so I stopped testing... changing fan speeds seems to do nothing at all to the temperatures.

Idk wtf is even happening anymore. I think it was the cpu. It started booting my pc and being locked to 800mhz even in the bios and eventually it wouldn't even turn on anymore (now) so I guess I've got a dead i5 6600k which is only a year old... Pc won't give me any beeps even with just cpu and psu plugged in.. gg

Is there a way to figure out if my pump is broken? I've had this cooler for over a year now running perfectly letting me overclock my i5 6600k to 4.5ghz and perfect temps and now it's overheating constantly so I think something is up. it idles around 70c and when I run a cpu stress test it quickly goes up to 90c then 100c and shutsdown. 1 of the tubes gets extremely hot and the other is pretty cold. the radiator is icey cold too even when the cpu is at 90c. on the Corsair Link 4 software you can change the pump RPM between 'quiet' and 'performance' I can hear a noise when I change them as in it gets louder during performance so that makes me think the pump IS working.. also changing the 2 fans speed from 800rpm to 2000rpm makes absolutetly no difference to the temps. pls save me it's at this is running prime95 for 30 seconds https://puu.sh/tnN9s/82e167e480.webm this is what it used to be like from a thread I posted over a year ago: https://puu.sh/lqZD4/52f8f550c5.webm

All the firmware is up to date Samsungs program says it'll take 45 minutes to complete when it used to take about 30 seconds..

Over the past month I've been getting terrible write speeds on my SSD (reading speeds are perfectly normal). I've tried updating bios/ssd firmware/closing all programs etc etc. is my SSD kill even though it shows perfect life? pls help :l

60hz

Sorry yes this is under 100% load. so Intel chips temperatures are this chaotic under load?

Voltage is at 1.35

This is from my new build so everything is new. I'm using a H110i GT to cool my i5 6600k OC'd to 4.5ghz. I haven't used an intel chip before so I don't know if the temperatures are supposed to be this high/chaotic on water? Here's a short webm of the temps going spastic. This is under 100% load http://puu.sh/lqZD4/52f8f550c5.webm

Yeah

Pretty sure you just have to turn off the DCHP setting on the second router (the one connecting to the MAIN router)

They're all good in crystaldisk (ssd is 100%) NEW INFO: I forgot to add that sometimes after it hangs when I restart it says overclock fail (I had a 4.1ghz OC) which I reset to default (3.2) and it went away for a day or so but the next day it came up again again saying overclock fail even though I didn't have an overclock on

I have an ssd so I turned restore points off - didn't care about them anyway I use CCleaner on startup.

The past week my computer has started to hang, it starts off with programs stop responding and crashing then shortly after it hangs another time I was copying files from hdd to hdd and it said I/O error or something and then I froze again shortly after Once I restart after a crash it gets stuck on the windows loading symbol and I have to unplug the pc for 10 seconds before it will boot up again help me pls