canadiansteve2

Oops I thought he was saying you could run battlefront on a 750

what do you mean why would it need to refresh???

and update drivers

windows 10 task manager doesn't report correctly. try cpuz

thats true they were made for that but that also means that af works well with them. and yes you are right its less cooling capacity but if cooling was an issue than sp fans are a no brainer.

it is possible... if you can inject the php client side instead of having it go active on the server side then it is possible. just run a code pass through and initiate it on the client side, the client creates a proxy server where you can inject veriables... then send a passthrough back to server side with whatever you need...

its because of the type of rad they have. for low fpi rads, airflow is better...

the h100i has 20fpi whereas something like the HX-CU1320V is 30fpi

oops my b

the AF120 will work much better on the H100i due to the lower fin density than non aio watercoolers...

what motherboard do you have

the problem is you only have 1gb. I would suggest getting at least 64gb for your uses

only battlefront man :'D what gpu and psu do you have in there. I have freezes when i cant provide enough power to the components.

the issue is undoubtedly a bridge issue on the power switch. the best solution would be to get into the bios and check that the electron positivity is still valid on the comm port for power over the south bridge

yes the solution would be to interrupt the connection between the antenna and the router. you'll want to add a 240v capacitor (ill look up the exact model and get you the link) to amplify the signal. the drawback is upload speeds are pretty bad. normally you would use a variable diode for this but since they're one way, it wouldn't work... i do this on my routers to get better signal throughout my house. ill log in to the modified routers for large downloads and then log into a non modified router for normal use and uploads...