Jump to content

Abnormal69

Member
  • Posts

    15
  • Joined

  • Last visited

Awards

This user doesn't have any awards

Recent Profile Visitors

360 profile views
  1. I will run DDU again and see if Catalyst 15.7.1 works.
  2. Failure with Crimson, the GPU does not even show up in the Device Manager. Scanning for Hardware also does not show it. http://prntscr.com/awahy4
  3. Ok, i will let you know when i install it.
  4. Bump
  5. Yes, as long as you dont install anything that exceeds 500W...
  6. DDU Version:15.7.5.5 GPU # 0000 Detected : AMD Radeon HD 7500M/7600M Series GPU DeviceId : pci\ven_1002&dev_6841 Detected Driver(s) Version(s) : 13.301.1001.0 INF : oem8.inf INF Section : ati2mtag_R476 Where can i find the WHQL? The driver is on 13.301.1001.0
  7. So today i woke up, went over to my tech-area, and decided to check for driver updates, now the thing is, my GPU (Radeon HD 7500/7600M) does not even show to have updates in the Device Manager of Windows 10 (64-bit), so i thought there must be some other place where there are drivers, since i thought Microsoft didnt have the card model in their systems for updates. Anywho, i found something called DriverAgent, and i saw that there was an update for my GPU, so here i am, installing it, and when its installed, i restarted my pc, and CCC (Catalyst Control Center) popped up with an error saying there was no drivers installed, and to install some go to this link blah blah blah, so i was like , ok this is odd, so i checked a few forums, and made the decision to go back to 13.1 driver version, and this is where i fucked up, i didnt roll-back the drivers, since i never thought that was a thing until it was too late, and now i just fucked up my GPU, and i dont even know how to fix it, thing is, it shows in the device manager a yellow triangle, and when i try to troubleshoot it with windows, it says "Oh look, some changes were made, try restarting!", but when i do restart, its like an endless loop of that. How do i fix this? Specs below. CPU: Intel Core i5-3210M RAM: 8GB DDR3 GPU: Radeon HD 7500 / 7600M Series? Storage: 1TB HDD Manufacturer: Sony Corporation Type: Notebook PC Model: SVE1512W1ESI Model Number: 54512184 Note: I have never updated the GPU drivers until now. ;( ALSO: Ever since i messed with the drivers, it is not able to pickup the 2 monitors i have connected via the HDMI and VGA Port. Meaning i am unable to play any games with my current setup
  8. Thanks, will try this when i get the chance
  9. these are the ports, theres just not enough space to have them both plugged in! the pieces on the sides of the VGA Cable, are metal incased with plastic, and the metal is whats interfering also!
  10. The HDMI and VGA port is less than an inch apart from eachother
  11. right but its not just the screws, its the little bars next to the actual input is whats too long to fit, i will post some pictures in a few minutes D:
  12. and i dont have any heavy equipment like a saw, so those methods will not work for me
  13. Yes but please note that im using a Laptop, and i cant use a full scale GPU with a laptop
  14. Ok, so im running a laptop with an AMD Card, but its quite an old card. It supports: 1xVGA 1xHDMI Im currently using the HDMI, but i CANNOT use the VGA and the HDMI at the same time! I have a VGA Cable, but the hdmi cable is blocking the little screws on the side! This is the problem, i have 1 Large TV that im using as a monitor, then i got 2 more Monitors (Akai 1080p Monitors 22" 60Hz refresh rate), 1 for my consoles (That are split using a Game Capture Card), and 1 for an extended monitor for my Laptop. So for me to use the other monitor, i need to use the HDMI and VGA port, but i need a VGA Cable that does NOT have the screws! they are too wide and wont fit with the HDMI in! Any ideas? i can only order from Amazon-UK unfortunatley, already tried looking but could only find normal VGA cables!
×