CALBIX

Found a fix. Use your RGB app of choice and set each RGB value to 0, hit apply and it should be turned off. I used mystic light from msi.

Just upgraded my pc to ryzen and need some help with Crucial Ballistix tactical tracer ram staying lit when the pc is switched off. Specs: R7 2700x 16GB Crucial Ballistix Tactical Tracer Ram MSI B450 Tomahawk mobo Thanks!

Seems like the LG is the better deal

Hi everyone I want to upgrade my display as I have a 1080p 60hz monitor. these are the three options I have: Asus VG248QE: https://www.amazon.com/VG248QE-1920x1080-144Hz-Gaming-Monitor/dp/B00B2HH7G0 Dell S2419HGF: https://www.amazon.com/Dell-Gaming-Monitor-response-FreeSync/dp/B07MB7WT39 LG 24GM79G: https://www.amazon.com/LG-24GM79G-B-24-Inch-Monitor-Reduction/dp/B06XFGTGC4 I am on a tight budget as these are the only 3 monitors I can choose Thanks!

I have this issue where if I try to run in Dual channel mode but my mobo keeps giving an error on post then shuts down and the process repeats

I have 2 sticks of 8GB in my pc. CPU Z shows that my ram is in single channel mode. Will dual channel give me any performance boosts?

Got the Mobo running. Gonna let it run for a few hours just to make sure everything is good before I switch. Thanks for all the help

Msi z97 Gaming 7

So the board will turn on? If the board turns on that's all I need to know

So the board will show post numbers?

Hi everyone A few weeks back my corsair cooler blew inside my case spewing liquid over everything. So I cleaned the motherboard and it worked fine for about 2 days after everything happend but I went to buy myself a new cooler. As soon as I went to install a new cooler and switched my pc back on nothing worked. The motherboard showed that there was power. After about 3 weeks I would like to test the mobo but I don't want to disassemble my pc just to check. Thanks

Thanks alot. Cpuz picked up the wrong sensor!

The Voltage on my old board was 1.2V when at 4.6 GHz. This Mobo just bumps it up to 1.7 at stock speeds.

So I had to get a new motherboard due to my corsair cooler bursting inside of my case and the motherboard just dying after working 24h after that. I got a MSI H81M-E33 and paired it with my 4790K cpu which was in the old mobo. The Voltage is currently sitting at 1.792V in CPU-Z and there is no way to change this in the BIOS nor in Command Center. Thanks!

I see Corsair released a CUE 2 update that includes a "Button Response Optimization" maby that will solve it for you?