zalkatibi

I would like the keyboard please, because my brothers keyboard is getting worse and worse, i would give it to him

Hi everyone! In the last few weeks I had random freezes when gaming on my computer. These freezes accured randomly, and for about 1-2 minutes, after that time, everything just resumes, and plays normally. This happens when copying files, etc. While the HDD is frozen, I can acces applications and files on my boot SSD, so the sata controllers should be fine. I already changed the sata data cable, and plugged into an other sata port on the motherboard. I also plugged an other sata power cable into the drive, just in case. My HDD is a Seagate ST3000DM001-9YN166 3TB 7200RPM drive. Here are my S.M.A.R.T readings, I don't really know, if it is ok or not, please help me, THANKS!! [01] Raw Read Error Rate: 118/6, Worst: 86 (Data = 182578600) [03] Spin Up Time: 92/Always OK, Worst: 92 [04] Start/Stop Count: 99/20, Worst: 99 (Data = 1103) [05] Reallocated Sector Count: 97/36, Worst: 97 (Data = 4928) [07] Seek Error Rate: 85/30, Worst: 60 (Data = 338240543) [09] Power-On Hours/Cycle Count: 88/Always OK, Worst: 88 (Data = 11067 hours / 1.26 years) [0A] Spin Retry Count: 100/97, Worst: 100 [0C] Power Cycle Count: 99/20, Worst: 99 (Data = 1118) [B7] SATA Interface Downshift / Runtime Bad Block: 100/Always OK, Worst: 100 [B8] End to End Error Detection Count: 100/99, Worst: 100 [BB] Reported Uncorrectable Errors: 1/Always OK, Worst: 1 (Data = 851) [BC] Command Timeout Count: 100/Always OK, Worst: 97 (Data = 2818114) [BD] High Fly Writes 48/Always OK, Worst: 48 (Data = 52) [BE] Airflow Temperature / Exceed Count: 62/45, Worst: 41 (Data = 38.0 °C) [BF] G-Sense Error Rate: 100/Always OK, Worst: 100 [C0] Power-Off Retract Count: 100/Always OK, Worst: 100 (Data = 111) [C1] Load/Unload Cycle Count: 94/Always OK, Worst: 94 (Data = 13286) [C2] Temperature 38/Always OK, Worst: 59 (Data = 38.0 °C) [C5] Current Pending Sector Count: 63/Always OK, Worst: 63 (Data = 6120) [C6] Off-Line Uncorrectable Sector Count: 63/Always OK, Worst: 63 (Data = 6120) [C7] UltraDMA/SATA CRC Error Rate: 200/Always OK, Worst: 200 (Data = 1) [F0] Head Flying Hours: 100/Always OK, Worst: 253 (Data = 10849) [F1] Lifetime Writes from Host (LBAs Written): 100/Always OK, Worst: 253 (Data = -1858227572) [F2] Lifetime Reads from Host (LBAs Read): 100/Always OK, Worst: 253 (Data = -1998070218) [And also sorry for any grammar mistakes, I am not a native speaker.]

Anybody got an ideato fix the issue?

To control the fanspeed itself you have to go to the advanced tab in settings and there you select your chips, and set pwm modes to manual

So I recently installed Windows 10 on my main rig, and just threw all of my usual programs on it (witch include SpeedFan). When I start SpeedFan up it starts loading, but after a few seconds it crashes the whole PC and I get a bluescreen. Anybody experienced this? Any fix for the issue? I am very courious becaouse I love that program. If there is no fix for it, can you recommend some nice thermal monitoring programs? Thanks in advance!

I would love to have one of them