STEAL7HY

1 minute ago, dalekphalm said:

Okay - so what else is on that breaker? Easiest way to test this is to shut off the breaker and see which outlets don't work.

 

On top of that, you're basically going over the breaker Amp limit (Assuming standard NA circuit, 120V w/ 15A breaker). Grab an electrical meter (something like a Kill-A-Watt meter - cheap on Amazon) and measure the output of the server (and all accessories - if you use a powerbar, plug the powerbar into the meter). Find out how many Watts it's drawing (and note Volts and Amps too)

 

Then, measure all other devices on the circuit and add it all up. If the total draw is under 1300-1500W, you're fine - if it's spiking over 1500W, you're just overloading the circuit (though depending on the specific voltage your circuit outputs - 15A could be as high as 1875W, assuming 125V).

 

If your total amps are well under 15A, then there's likely an electrical issue with your circuit - a short or something else perhaps.

Thank you sir this makes sense I have a refrigerator and another decently power hungry PC on the same breaker and I do believe I am over 1500W. I will unplug stuff and that should fix it! Thank you!

3 minutes ago, dalekphalm said:

Can you clarify, what breaker is it tripping? The circuit breaker in your house for that particular outlet circuit?

 

Or the breaker inside your PSU?

Is there a seperate breaker for the psu if so I think it might be the socket not the pc.

1 minute ago, dalekphalm said:

Can you clarify, what breaker is it tripping? The circuit breaker in your house for that particular outlet circuit?

 

Or the breaker inside your PSU?

The circuit breaker in the house.

Hello I bought a Dell T3600 and installed a RX 570 into it. I am having an issue when trying to start the computer or waking up from sleep mode it will trip the breaker. But most of the time it will work fine when it does turn on. Does anyone have any ideas on how to start diagnosing this? Thank you!

Dell T3600

E5-1603

16 GB Ram

Visiontek RX 570 4GB

635W Power Supply

1 minute ago, Clarkius said:

Minecraft mods often times aren't the best in terms of system optimization, I would keep game settings turned down and just deal with it tbh, or reduce the amount of mods you're using. 

Thanks!

Hello I have a Dell T3600 with a Xeon E5-1603, 16gb ram, and a RX 570.

I run Regular non modded Minecraft 1.12.2 and 1.14.4 and I receive around the 100 fps mark with high settings and mipmap level 4.

With Modded Minecraft 1.12.2 I get 1 fps on high settings and mipmap 4 but I get 60 but not very stable fps at everything on low and mipmap off.

I ran hwmonitor and when running non modded minecraft it was clocking to about 818MHz but when in modded minecraft it clocked to 741MHz. It did run at 1200MHz on 1.14.4.

Any ideas? Thank You!

8 hours ago, W-L said:

With so many components you will most likely overload your RGB header as it has a max amperage of usually around 2-3amps so you will need to check the total load of all the components. If that is so you will want to use a power RGB splitter such as this instead which will take an external 12V. 

http://www.xs-pc.com/fans-radiator-accessories/8-way-4pin-12v-rgb-splitter-hub-sata-powered-black

 

-Moved to Modding section- 

Ok thank you for your help and sorry for puting it into the wrong section

Hello I was wanting to use this case https://www.newegg.com/Product/Product.aspx?Item=N82E16811119330

This AIO Cooler https://www.newegg.com/Product/Product.aspx?Item=2YM-0004-00015

This light strip https://www.newegg.com/Product/Product.aspx?Item=N82E16811999390

And three of the spliters https://www.newegg.com/Product/Product.aspx?Item=N82E16812229001

On this Motherboard https://www.newegg.com/Product/Product.aspx?Item=N82E16813157800

Will this work with my attached layout or will I need to do something different I want them to be the same color (White) Thank you for your time

12 hours ago, Herman Mcpootis said:

yes.

Ok thanks for your help!

5 hours ago, Herman Mcpootis said:

only A320 boards don't overclock for AM4.

Do you know if it has support for overclocking memory? I'm looking at a 200mhz overclock on this ram https://pcpartpicker.com/product/TRF48d/corsair-vengeance-lpx-8gb-1-x-8gb-ddr4-3000-memory-cmk8gx4m1d3000c16

9 hours ago, Herman Mcpootis said:

PCPartPicker part list / Price breakdown by merchant

CPU: AMD - Ryzen 3 2200G 3.5 GHz Quad-Core Processor  ($89.99 @ Amazon) 
Motherboard: ASRock - X370 Pro4 ATX AM4 Motherboard  ($59.99 @ Newegg) 
Memory: G.Skill - Aegis 8 GB (1 x 8 GB) DDR4-3000 Memory  ($45.98 @ Newegg) 
Storage: HP - EX900 250 GB M.2-2280 Solid State Drive  ($40.99 @ Newegg Business) 
Storage: Seagate - Barracuda 1 TB 3.5" 7200RPM Internal Hard Drive  ($42.05 @ Amazon) 
Video Card: PowerColor - Radeon RX 580 8 GB Video Card  ($179.99 @ Newegg) 
Case: DIYPC - J180-BL ATX Mid Tower Case  ($38.97 @ Newegg Business) 
Power Supply: Corsair - CX (2017) 450 W 80+ Bronze Certified ATX Power Supply  ($19.99 @ Newegg) 
Total: $517.95
Prices include shipping, taxes, and discounts when available
Generated by PCPartPicker 2019-02-23 01:06 EST-0500

Hey does that motherboard support overclocking like the B350?

8 hours ago, Herman Mcpootis said:

PCPartPicker part list / Price breakdown by merchant

CPU: AMD - Ryzen 3 2200G 3.5 GHz Quad-Core Processor  ($89.99 @ Amazon) 
Motherboard: ASRock - X370 Pro4 ATX AM4 Motherboard  ($59.99 @ Newegg) 
Memory: G.Skill - Aegis 8 GB (1 x 8 GB) DDR4-3000 Memory  ($45.98 @ Newegg) 
Storage: HP - EX900 250 GB M.2-2280 Solid State Drive  ($40.99 @ Newegg Business) 
Storage: Seagate - Barracuda 1 TB 3.5" 7200RPM Internal Hard Drive  ($42.05 @ Amazon) 
Video Card: PowerColor - Radeon RX 580 8 GB Video Card  ($179.99 @ Newegg) 
Case: DIYPC - J180-BL ATX Mid Tower Case  ($38.97 @ Newegg Business) 
Power Supply: Corsair - CX (2017) 450 W 80+ Bronze Certified ATX Power Supply  ($19.99 @ Newegg) 
Total: $517.95
Prices include shipping, taxes, and discounts when available
Generated by PCPartPicker 2019-02-23 01:06 EST-0500

Oh wow thank you very much!

2 minutes ago, Herman Mcpootis said:

A ryzen 1200 would be much better than the FX chips. Do you already have everything? Which country are you in? 

No I don't have anything yet and I am in the USA

Just now, ChewToy! said:

Don't get any FX series CPU.. And That's a crappy power supply..

 

Try to aim for a cheap Ryzen setup. You can find used parts online to lower the price a little. 

Ok thank you!

Just now, zlolslavez said:

It depends, but I wouldn't call FX-8350 "higher spec". At this budget I would look at the 2200G-i3-8100 range. Look at my signature for a build in that price range.

Ok thank you very much for your help!

Hello I would like your recommendation for a new pc.

Should I go with newer lower spec parts or with a little older and higher specs?

Looking for arround 500$ mark.

This is what I put together. https://pcpartpicker.com/list/Rk7yzY

Running Windows 10

Games being played mostly is

Fortnite

Garry's Mod

TF2

CSGO

Thank you for your time!

2 hours ago, ShredBird said:

Some things to try are:
 

• Get a filtered AC power plug.
• Try a different circuit from computers and other noise generating equipment.
• OR try different combos of plugs (could be a ground loop issue).
• Get a ground lifter for your interfaces and/or power:
  • https://www.bhphotovideo.com/c/buy/Hum-Eliminators/ci/15139/N/3992462126
• Use a noise gate if possible.
• Use the smallest amount of gain you can get away with.

Ok thanks for the info! Is this Pyle Pro PHE300 Mini 2-Channel Hum Destroyer any good if you know?

Thanks!

So I have a RunningMan ProFX16 that has a hiss when I try to record from it. I have 5 mic inputs and 2 computer inputs but it also hisses when all of the channels are muted. Thanks for your help!

I have my webcam plugged into a 50 ft usb extension I don’t think it’s receiving reliable power is there a inline usb power supply or is that my problem?

1 minute ago, Electronics Wizardy said:

Depends on the use case. If your loading games it will help a bit, depending on games played.

 

Depending on budget, Id be temped to just get a 1 or 2tb drive. There getting to 150usd for 1tb ssds now.

Ok thank you very much

2 minutes ago, Electronics Wizardy said:

You can also use storage spaces tiering built into windows 10. Id get the bigger 240gb inland drive.

 

You can't compare sequentical speeds, both of those drives are dram less so random io will be slower and thats what your normally limited by, and what a ssd cache is designed to help with.

3 minutes ago, OrbitalBuzzsaw said:

120GB should be fine, hell you'll probably be fine with a 64GB

Is there any guess how good the preformance is?

I am wanting to boost a Seagate 2TB BarraCuda 7200 RPM Drive. With PrimoCache or is there a diffrent way to do it with better results? What size SSD do I need? I already seen the Kingston A400 120GB SSD with 500MB/s Read and 320MB/s Write. Or the Inland Professional 240GB SSD with 530MB/s Read and 440MB/s Write.

Thank You for your time!

16 minutes ago, Netivity said:

Can adjust deadzone in-game and the logitech software. Go into in-game settings, input wizard, move your wheel and whichever comes up with the yellow line is your wheel axis, adjust that accordingly. Took me ages to figure out, but got there in the end.

Thank you it fixed it I thought it was broken! Thanks!

When I play on ATS with my G920 the wheel ingame and my wheel misalign. Any help Thanks!

Hello does anyone know any coolers that can match up with a Optiplex 755 motherboard? I am trying to put it into a new case for better graphics card support! Thank you for your time.