BTA

Some progress!

More stuff mounted. I was going to use magnificient watercooled Nvidia GM107 GPU for this, but cooler mounting holes are with different dimensions than my GK104. Meaning that my universal EKWB GPU block wont work for this! I could mount GPU horizontally, but as this is not coming for anyone I dont feel making that mount for low end computer that no-one will use. If I find buyer for this case I'll mod it for him if necessary. RTX 2060s or RTX 2070 reference cards would be perfect for this. Just hard to find with reasonable price..

Some minor progres.

Some airflow for bottom rad

Ye this remolded power cord looks super sketchy no doubt there. All terminals are on their places. I have those cables in the first link. Problem is: With my setup it angles the cable straight to a flat wall, without space to make a turn. Second link would be awesome, except it would angle the cable 180 degress to wrong direction ? Connector was heated just enough to make it slowly bend. I should be good unless this cable I used had extremely cheaply insulated cables connecting to the terminals. Sure its not strong as it was, but with normal use it's just fine.

Finally hiding the stupid power cord ?

Thank you, follow and you'll see how it looks when finished ?

This has been waiting for long. Started to clean this and test fit things.

Watercooled Antec Fusion! ''Triple chamber structure to separate heat and noise of power supply, hard drives and motherboard for cooler and quieter operation. Removable HDD brackets with extra soft silicone grommets to reduce vibrational noise. Advanced cooling system: 2 x side-mounted 120mm TriCool™ 3-speed fans. The two fans have variable speeds and their speeds can be adjusted using the attached switch – low, medium, and high. Aluminum plate front bezel with Vacuum Fluorescent Display (VFD) and Volume Control to work with media center applications. The VFD displays useful information (controlled by an application shipped with the Antec Fusion), such as RSS feeds, system information, graphic equalizer, email, etc. The Volume Control directly controls the volume of your Windows XP operating system. '' - Wei-Men Lee blog Specs: components! 2x360mm rads D5 pump and tank

I'll paint the grill with the parts to be black

Thank you

Currently making a front panel filter. Had to split it to 6 pieces and connect those together with clips (later with glue to make it solid)

Progress, it's pretty done.

Ended up doing it this way. Now user can have charger or what not and still move the screen to desired angle. Pretty clean IMO, what do you think??

More like 96% Better is better. With lower bitrates side by side I can see the difference and I like to push all performance out of the hardware. I was just surprised that LOW preset had problems with 1800x.

Last day I ended up gaming and streaming +10h straight with this setup. Stream PC (1800x+GTX780) outputting 1080p/60fps/medium obs preset. CPU hovers around 50% load and GPU 40-50%. I wanted to use OBS preset LOW, but the outgoing stream is missing frames on Twitch side, even tho CPU not going over 90% and OBS saying everything is fine. Any clues for a fix? Maybe CPU is just not powah enough. MainPC temps (2700x/GTX1080) at highest peaks GPU 54°C CPU 65°C and rads started to show some heat on them. Need to set fans to power up a little bit more than min speeds when the second PC is on high load. So far loving this box. (except the urge to upgrade has already hit me...)

Uuu! A comment! I was suprised as well. I'm running single D5 with lowest speed, without any problem! (Non PWM model with the red knob 1-5 speeds). Thank you! I'm very happy how this is coming together. Dead silent idle, dead silent 100% load. All running on min speeds, all OC'd. GPU temp have peaked once at 50 celcius. Valley benchmark and temperature hovers around 45-48.

Fans arrived. I was planning to run them with DC 3 pin fan controller I installed earlier, but these and my other PWM fans seem to make little rattling noise when running with this controller. = Changed radiator fans to one single fan port. (Arctic says max 5 to one port with PST connection, but to my understanding fan port should support 1A/12v) 8xArctic P14 = at max 0.96A. Also, I run these with 20-30% speed, so I should be good. Doing this gave one free fan port on the mobo to be used with front panel fans. (6x Arctic p12 PST). Using these fans as they should (via PWM port) keeps them running super quietly even with higher speeds. Way quieter than my Noctua p12s and with way cheaper price tag. Well done Arctic Also wondering what kind of grill I'll do?

Wonder Woman project got Benq XL2411P 24''. 1 PC: Benq xl2411 24'', Dell UltraSharp U3415W 34'' and above is Eizo EV2450 24''. 2 PC: Asus PB278QR 27'',(above the xl2411)

Power cable to be bent, power cord to be mounted behind the monitor. New monitor arrived to be used with this PC. Benq xl2411p.

It's a messy one, but a good memory. ?

First fan mounts printed succesfully. Cutout for ports done.

Few early shots. Dont like the watermilk color that much, but way better than clear water imo.