Ermodo
-
Posts
58 -
Joined
-
Last visited
Content Type
Forums
Status Updates
Blogs
Events
Gallery
Downloads
Store Home
Everything posted by Ermodo
-
External HDD has a bracket on top of the connector
Ermodo replied to Ermodo's topic in Storage Devices
why should it need to ground? My internal hasn't any metal connections with the case or psu -
Hey, I opened my external HDD because I was feeling some current on the usb-cable, when I pressed it against my fingers (only with the outside, not with the pins). On the inside I noticed a little bracket (metal), which was mounted on top of the usb-connector to the metal cover ove the actual HDD. Does anybody know what that's for? http://imgur.com/a/FG5l8
-
I had a similar problem 2 weeks ago (I also wanted to lower the VCore and then the pc wouldn't post) but my error code was 41. Not sure what I did to fix it but I let the pc sit at that stage (switched on) for several minutes and then cleared the cmos (still powered on). When it is stopping again (with the same code) I pressed the reset button and let it sit again. After some time the monitor switched on and everything worked as usually.
-
Typical i7 6700K Voltage at 4.7GHz?
Ermodo replied to ApolloEleven's topic in CPUs, Motherboards, and Memory
I overclocked my 6700k yesterday (4.7ghz) and I use adaptive +0.03V and for boost Voltage 0.25V -> aida shows that it's around the 1.27V -
Hey, I recently moved to win10 and installed some Games. But multiple games need the Tages-Driver (http://www.tagesprotection.com/). Espacially the game Anno needs it. Windows warns me about incompatibility and doesn't install it. -> Games with this protection don't work. Any suggestions?
-
WOW great answer. If the problem shows again I will try this out and let you know i it worked.
-
OK Guys. I moved the case and all of It's contents and let the Board take care of itself. After a few minutes it bootet into windows. If nothing else is wrong I would call you again. THANK YOU to all you tried thier best to help me. I really appreciate it. Again THANK YOU
-
Kingston HyperX 16GB Memory Kit 16GB DDR4-2400 CL15 288-Pin UDIMM Kit (2x8GB) HX424C15FBK2/16
-
After I cleared the C_MOS it boos but then says Press F1 to run setup (Image). Then I go to Exit and press "Load optimized defaults" and then "Save Changes and reset". After that it gives me the code 41
-
PLS tell me what to do
-
But what mean they
-
should I try to flash the bios?
-
OH But thx for your help
-
Sure I have but I have only 1 and have to switch between this and the broken PC
-
http://imgur.com/a/60eOH
-
No just to the screen were it says press F! to setup
-
I can't find a way to post images so I can show it to you
-
When I clear the c_Mos it boots but when I press F! to setup and then save the setting s without changing them the uefi won't boot
-
sometimes its booting right a way but the code appears after I try the setup
-
American Megatrends if I remember right
-
Hello, Yesterday I build a PC and it worked fine until this morning. I looked in the uefi and it showed me 1.4V Core and I wanted to lower it to 1.2V. As it didn't boot that time I tried to reset and clear the cmos, Sometimes the board boots but wants to do a Setup with a reboot which fails. Bow it only says 41 as a Post-Code but in the manual I can't find the code. PLEASE help
-
If it's stable im satisfied. Thanks to you too.
-
k thx for the quick replys
-
I'm building myself a new Skylake system (6700k) and was going for a 390 (from Sapphire). On their website it says that a 750w psu is recommended but I already have a 650w (Corsair rm) sitting here and don't want to buy a new one. I also would like to overclock my system (at least a small bit). So my question is: Is my 650w psu enough to fit my system and to be stable?
-
what about a zotac? I never heard anyone choosing them.
