Rob-

Any ideas?

Alright I'm using the 3000mhz profile now with 33 on the multiplier and aida fails within a few seconds. Asides from the vcore All voltages are on auto at this point.

Thanks for the replies Should I be worried about that overvoltage error? I'll try the 3000mhz profile now.

34 failed in seconds 33 blue screened "irql_not_less_or_equal" Upon the restart I'm greeted with a Cpu overvolt error and cpu overtemp error I get in to the bios to see this That's kinda worrying.. I went in to the bios to confirm that the vcore hadn't changed from the 1.2 yet somehow this happened.

I set it to 35 and it fails in Aida after two minutes. Is it time to adjust voltages?

Yes, the 2800 one as you see in the pictures. Fails within 10 seconds of Aida.

Hello! I'm not an experienced overclocker and I'd like some help. Quick specs 5820k x99 deluxe H110i 16gb quad channel corsair 2800mhz 2x r9 290 corsair hx1000 So I watched Linus's video and managed to get the same 4.5ghz and got the vcore down to 1.24v and runs through all the time of realbench and aida I throw at it. I thought it was time to move on to the ram so.. The two XMP profiles options are at 2800 and 3000. When I select the 2800mhz profile the BCLK goes to 127.3 which kinda changes everything and now I'm kinda stuck at where to go from here. Pics of how the settings are http://imgur.com/a/TLdWz I'm a total noob on this matter and any help would be appreciated Cheers!

Raising the Dram voltage slightly made next to no difference and i'm met with this screen after the system crashes.

Thanks for the reply. I've ran the system at stock settings for the past 4 days yet the freezing and restarting persists.

Hi all, Firstly here's the system specs. i7 5820k Asus x99 Deluxe 16gb Corsair LPX 2800 (@2133) 2x AMD R9 290's corsair RM850 psu Samsung 850 pro 250gb Running windows 7 Ultimate Alright so here's the issues Sometime after loading up into windows if I opened up a browser straight away the pc would black screen and restart, If I waited aroud half a minute and then starting running programs etc it wouldn't restart. I updated the bios to version 2001 and that seemed to stop it. I assumed everything was fine after that so I decided to overclock. I couldn't seem to get the memory a tad above the 2133 without issues so I gave up with that. The 5820k though I managed to get to 4.4ghz with a cache ratio of 4.0ghz with a vcore of 1.23v, this would pass many hours of Intel XTU, AIDA64, OCCT Asus RealBench and I was pretty damn happy with that. Not so good though, I could play GTA V for hours but when I'm browsing the web the system would randomly black screen and restart giving me a lovely overclock failed error. I've now also noticed black screen restart issue creeping back happening when loading in to windows, if I have an overclock applied, upon reaching the bios screen I'll get the "overclock failed" but when I have everything at default in the bios it'll still freeze but with no OC failed error. I'm kinda stuck here, this has already happened today whilst getting on to this forum and I don't know what to do next. Can I get some advise please? I have updated the bios to 2101 and still have these issues.

Umm

Atari 2600 2x Super Nintendo 2x Nintendo 64 5x Xbox 360's Xbox one Did have a crystal edition original xbox Had many ps1 and 2's Did have the old fat Nintendo with games the size of VHS tapes.

How long ago did you purchase the card? I've had issues with Scan and wont use them again. I ordered a AX1200I and was sent a second hand unit. They didn't seem bothered that they had sent me a box with 2 cables... i ordered a H110iGTX and was sent a second hand unit. They offered me a £10 partial refund... the unit had already been mounted and signs of damage were obvious. When I complained they honestly didn't see the problem with sending me second hand shit.

The 14 cable ones were around £1.30 each and the 8 cables were around the same. That was custom made by the folks over at ColdZero. Here's their website http://www.coldzero.eu/

So, cable combs have been around for a little while now and while they may seem expensive for what they are, I'd say they're definitely worth it. I decided to buy a few off Ebay and this is the result.