_SpaVet_

\ Update #6 Back at it again with another update Let me think what I have done since the last update … Oooh yes I remember now. I CNC milled the horizontal plate on which the motherboard will be placed. Unfortunately, the drill was worn down wherefore the holes don’t match anymore. I’ll have to order a new acrylic panel and replace this one but those are worries for later. The 24-pin cable will be replaced by that of Bitfenix. I love to see how the board is flush with the plate I polished the pump top and reservoir but for some reason I didn’t make a picture of the reservoir … I still have to remove the remaining polishing paste. In the meantime I designed a pc case holder or however you would like to call it. For those who want to know how I made it: I first made a rough sketch in Inventor 2016. Then I opened the same file in Autodesk 123d make. This program slices the object, you can set how many slices you want or at which angle it should be sliced and etc. Finally I got it cut with the laser cutter. I’m still thinking about finishing it but I do not know exactly how yet. Someone also welded some metal rings on the outside of the case for me to secure the front and back panel later on. On the inside, we welded some support brackets to hold the acrylic horizontal plate. And just some random pictures …

Update #5 (I somehow forgot to post this on this forum) After waiting for a very long time, I´ve decided to make the case by myself. The lack of communication between me and Parvum has just been below average (in my opinion). I don't know if someone else had/has this problem to but it might be something to keep in mind? So let's move on with this build. Luckily I'm studying at a technical school that has the appropriate equipment to finish it. The things I've already made are the reservoir and a front panel. In the meantime I bought some acrylic and dam what do I love that glow … Still have to polish the reservoir but I think it already looks awesome! The reservoir was CNC milled by a good friend of my. I used some 10mm thick clear acrylic form Evonik. The only downside was that the vacuum cleaner did not really do what it was supposed to do so the entire floor was covered with plastic snow. The front panel was laser cutted at school. This is just a test panel to see if the measurements were correct therefore, it is made out of triplex (plywood?). Yes the plate was a bit to small … Up to the next update! Bart

Update #4 Here we're again after being able to solve the problem with the sercurity breach. It was a pain in the ass to make and design the case but we're finally getting somewhere ... I would also like to thank my new sponsor, Team Group, for providing me some DDR4 for this build Team Group Dark 16Gb 2800MHz In the meantime I also bought a D5 with an EK top that will be polished. Team Group Dark DDR4 D5 And finally the case I had to tweak the design quite a lot but I think it will still look very nice. As you can see I also added a 5.25 in bay for the fancontroller. I now have to wait until Parvum will help me with the inside of the case. After waiting for a very long time, I´ve decided to make the case by myself. The lack of communication between me and Parvum has just been below average (in my opinion). I don't know if someone else has this problem to but it might be something to keep in mind? Bart

UPDATE #3 Hey guys! I received another package, this time it's one from Bitfenix!! PSU I didn't even know that Bitfenix made power supplies untill now but omg what does this PSU look good! The PSU also comes with a set of fully braided cables, wich are just stunning in my opinion. Don't know if they are going to make a 1000W version but I already asked for it :thumb: Fancontroller The only flaw I can find, is the huge bundle with cables at the back of the fancontroller but it works just fine. Some extras Sleeved sata cable LEDstrip Still looking for someone/company that could make my case (the steel barrel itself), so if you know someone, please tell me! Bart

Thnx! The logo will be the reservoir and I think i'm going to put 2 slim 360mm radiators in the lower section of the case (it's divided horizontal in 2 sections)

Hello guys While searching true the forum and other sites, I realised that my case wasn't special at all ...(or at least in my opinion) About a week ago we went to an enterprise that recycles the nuclear waste in Belgium and that visit gave me some inspiration. The result? What do you think? Should I change it to the barrel or stay with the cube version? Bart

UPDATE #2 Hey guys! I know its been a while since I posted, but I've been busy with school and stuff. Despite the busy week I could still receive some packages :thumb: Ooh and what was it fun to unpack these!! So what did I receive? The Plextor ssds, my X99 motherboard, the Ram that I bought, the processor and the fans. Once again I would want to thank my sponsors for realizing this project! The fans These fans are just awesome, I'm currently using them in my pc and ooh man what a difference! They are extremely quiet in comparison with the H100i stock fans and they even perform better Plextor ssds I have them in raid 0. Read speed is +/- 950 MB/s and write speed is +/- 630 MB/s. I also like the design of these ssds. Asus X99 Deluxe About the motherboard: it's a very nice and beautiful motherboard but I just hate the AI Suite 3 software OMG. Anyway, I would love to have seen some LEDs between the covers and the motherboard itself because you can barely see it in a dark case. I forgot to take some pictures of my processor and RAM as I needed them ASAP because I already sold my old processor ... My processor runs stable at 4.6 Ghz @1.3V (I'm still fine-tuning the voltage to). Some other great news Parvum systems said that they're just finishing up on a big order and that they could start the 14th of May with my custom case Can't wait ... Ooh yeah, I could also mention that Parvum systems is running a limited 20% off sale on EVERYTHING. They ship worldwide!! www.parvumsystems.com/products

glad you like it

Love them to and especially if they are in Raid 0

Teaser

It's always great to hear someone's opinion

What could be done better then according to you?

UPDATE #1 New sponsors and I bought myself a X99 motherboard with an 5930k for a very nice price !!

Not only that, but rust and radioactive effects are easy enough to create. pm'd you, but go ahead! Surprise me I made them larger, is that correct?

'Personally it doesn't really reflect the theme as well as a banner should' , I know it. I had some other ideas but I couldn't make something that looked nice and as for the name of the project ... The problem is that I just don't have any inspiration