danieldsklein

Yes, you can try the new beta GUI on freenas 11, but the default GUI is the same

this is for sure the best tutorial on how to install and configure Freenas, Wendell is awesome

Probably a little bit too late, but Freenas the stable release is rock solid and very good for business. And ZFS is very scalable and very reliable, if the storage grows a lot you can move to TrueNas that can scale to petabytes in size very easily

Already tried pluggind the drive direct to my pc. I will try Linux if I have any luck

Hello, I have an old External WD My Book HD. I can't acess some of my files, most of the folders used to look like these but now most of them look like these Some I receive an error message of being inaccessible, some of them look empty. I know that I probably won't be able to recover everything, but I would like to know if there is something I can do

Already reseted the Bios, no luck there. And I changed my SSD for another one just to test another copy of windows, still no luck

So, the temps are all normal, SpeedStep is deactivated, but even running cinebench my CPU is still running at 1.2ghz

I will check it later today, but I am almost sure it is not the problem, all the fans were working, and it is a very well ventilated case

I checked the bios settings, it's an asus board, it is in high performance mode. And I tried deactivating speedstep mode, I don't know if it didn't work, or if it is not the problem

I have a i7 4930k and everything was working fine, but since last week, it is always running at 1,2ghz, and not only in idle, but when I am rendering something it is still running at 1,2ghz and rendering it very slow.

If you don't have a ssd yet the first thing you should do is buy one

Hello guys, My father has a PC which had some trouble with the MoBo, the Lan port was nos stable and sometimes the computer would not turn on. Motheboard: M5A88-V EVO CPU: AMD FX 8150 RAM: 4x8gb Corsair Vengeance 2133Mhz (running at 1600mhz) GPU: AMD HD 6970 DCUII HD: 500Gb Western Digital Power Supply: OCZ 750W I used my SSD (Samsung 840 Pro 250gb) to diagnose it, and then changed the MoBo for a Crosshair V Formula I already had and tested everything again still using my SSD and everything was working fine. When I put my fathers HD back, it would load the windows boot animation, and in the middle of it, it flashes a blue screen and turn off. I tried the windows repair and nothing, then I tried the system restore and still nothing. So I tried booting up in safe mode, and it was loading fine until it reached AtiPciE.sys then it hanged and reset. I know many people will tell me just to reinstall windows, but there are some programs that I can't even find a installer nowadays, and it is a work pc, so reinstalling would be the last resort. ps.: Using my SSD I can access the HD just fine, so it looks like is not a hardware problem with the HD

My pc posts, loads the raid configuration normally, but insteads of Loading windows, it keeps on the black screen with a _ bleeping. It is a p8z68v-pro mitherboard, with a intel i5-2500k with 2 OCZ SSDs in raid 1 for the boot drive, with 3 more 2TBs HDDs then then and it keeps on this screen

What render do you use? because there are a lot of good renders that are CPU only, like V-ray, in that case I would suggest you to go for a better CPU, if not you already have an awesome rig man

THe knock On feature is just awesome, wish I had in my phone =/