Loop plan looking for feedback.

[Actuosity]

Hello,

Current Setup
I7 4790k - 4.4Ghz
16GB DDR3 HyperX fury 1889mhz (I know not a normal clock speed for ram but it works and I was bored) (2blue 2black)
ASUS Sabertooth Z97 Mark 1
Corsair 1000W RM (Customer sleeving Black/blue next month)

Gigabyte GTX 970 G1 Gaming 1335mhz on the core. (Likely getting a second this spring)
2 x 256GB Plextor M6S Raid 0 (Silver at the bottom of the case)

NZXT H440 Blue (Modding top and front this weekend to have 360mm grills)

My build is Black and blue,

Loop Plan:
Hardline PETG (Clear Blue Liquid)

EK HDC Hardline Fittings (black nickel)

EK Supremecy EVO - Acental + Nickel Cpu block
EK GTX 970 WF3 Acental + Back plate GPU Clock
Vario D5 with Acental Pump Top (x2 potentially depending on flow rate and if second GPU / rear 140mm installed)
Alpha Cool NexXxos Monsta 360mm Rad (front) (push pull intake)
Alpha Cool NexXxos ST30 360mm Rad (top) (Pull exhaust)
Alpha Cool NexXxos ST30 140mm Rad (rear) (Push Exhaust) this is still a maybe, rad would be outside case fan inside depends on flow rate
9x Cougar 12CM CFD Blue LED fans (have 6 currently I understand their not the optimum fan, but they're as quiet as I want, and honestly run well for quiet fans)
1x Cougar CFD 140mm Blue LED
Dark Side  221 Barrel Tube Rad 250ml

All constructive feedback appreciated as this will be my first customer loop.


 

[shypin]

looks good

[noodlecare]

Hello,

Current Setup

I7 4790k - 4.4Ghz

16GB DDR3 HyperX fury 1889mhz (I know not a normal clock speed for ram but it works and I was bored) (2blue 2black)

ASUS Sabertooth Z97 Mark 1

Corsair 1000W RM (Customer sleeving Black/blue next month)

Gigabyte GTX 970 G1 Gaming 1335mhz on the core. (Likely getting a second this spring)

2 x 256GB Plextor M6S Raid 0 (Silver at the bottom of the case)

NZXT H440 Blue (Modding top and front this weekend to have 360mm grills)

My build is Black and blue,

Loop Plan:

Hardline PETG (Clear Blue Liquid)

EK HDC Hardline Fittings (black nickel)

EK Supremecy EVO - Acental + Nickel Cpu block

EK GTX 970 WF3 Acental + Back plate GPU Clock

Vario D5 with Acental Pump Top (x2 potentially depending on flow rate and if second GPU / rear 140mm installed)

Alpha Cool NexXxos Monsta 360mm Rad (front) (push pull intake)

Alpha Cool NexXxos ST30 360mm Rad (top) (Pull exhaust)

Alpha Cool NexXxos ST30 140mm Rad (rear) (Push Exhaust) this is still a maybe, rad would be outside case fan inside depends on flow rate

9x Cougar 12CM CFD Blue LED fans (have 6 currently I understand their not the optimum fan, but they're as quiet as I want, and honestly run well for quiet fans)

1x Cougar CFD 140mm Blue LED

Dark Side  221 Barrel Tube Rad 250ml

All constructive feedback appreciated as this will be my first customer loop.

 

Hey I am trying to do something quite similar (link: http://bit.ly/1N8Rglp). I have two hard drives so i only kept to drive cages in the top. then i removed the rest. then i had access to my two 120 mm fans. from here on, i plan to put a 240 rad, and only watercool my cpu until i am done researching more about gpu watercooling. i feel like a h440 owner's biggest issue for watercooling is the reservoir. SO i planned to mount my resavoir to a 120 mm fan in the back exhaust. I hope this helped a bit. We should contribute to each other's projects so we can help each other and give tips to each other! I will definitely stay tuned!!!!