Search the Community

Hi guys, I am having a bit of trouble with my computer and I'm stuck in troubleshooting. Hereby follows my specs, and a brief summary of my situation: Specs: i5 4690k Msi z97 pc mate Corsair vengeance DDR3 (4x4gb) GTX 970 (Asus strix) So yesterday I was plaing some games with my friends when all of a sudden all of my open programs shut down and I then got a BSOD with the stopcode: System_thread_exception_not_handled. I have recently switched to a Corsair H115 as my CPU cooler, and I've been having issues with it as it sometimes have caused very high temps on the cpu at idle. Maybe the pump is malfunctioning. Anyway, when I start the computer back up my CPU temps are at 85-90 degrees celsius and I immidiately shut it down again. After that, I decided to switch my cooler back to a simple air cooler (cryorig c7) as I thought that the BSOD may have been caused by overheating. Although, when I eventually turn my computer back on, I get the stopcode 0xc000000f at boot. I search it up, and try to go in to command prompt in pre-boot to fix it, although unsuccesfully. After many tries, I eventually decide to reinstall windows from a USB flash drive. Everything seems to be fine, windows gets downloaded and i get in to the operating system and I install some drivers. Therefore, I need to reboot my computer, and I do. However, upon starting again, I immideately get a BSOD saying "page fault in nonpaged area", and I can't start the computer. Again, I search it up and try to correct it in command prompt via the USB flash drive, but this does not grant admin accessibility and I am unsuccessful. I try to access the command prompt in the repair tool that appears when the computer has been unsuccessful in booting three times, however when I try to log in to gain access, it says my password is wrong (which I for a fact knew it was not). I then tried to boot my computer with only 1 ram stick and without the graphics card, as I read faulty RAM may be the problem but this did not work either. I then reinstalled windows again today, and I get in to the operating system. There, I downloaded Overwatch and it ran as usual without problems or crashes, but as soon as I rebooted the computer I got the same error code ("page fault in nonpaged area") and can't access windows again. Again, command prompt tells me my password is incorrect, and I get the same error message when trying to boot in to safe mode. I have turned off fast boot in bios, and replaced the cmos battery, all without luck. At first, I was convinced this was a windows issue, although now I am not so sure anymore as I was able to run windows and use it normally after the reinstall. The problem then is booting, and I have no idea what to do next. Could it be the motherboard or the cpu that is faulty? Very thankful for any replies, I am in a difficult situation as this is the computer on which I do almost everything regarding distance learning in school. If you have any additional questions, please feel free to write a comment. Thanks! /Joel PS. Sorry for not including dump files, as I can't even get in to windows I haven't been able to collect them.

Hey, so I'm going to describe the problem and then give you the specs. So I have built my new PC and everythings great until I have to install windows on a Samsung M.2 drive. So I am trying to install windows and I have gone into the BIOS and enabled and disabled CSM support, tried it with the 2 partitions on the USB that has UEFI and the other that isn't labeled as UEFI, I have enabled and disabled fast boot in the bios as well. I have even created a new USB from my laptop to get this to work and its not working. I am really starting to lose my mind here guys, and I just need some more options of what I can do on my own cause I am kinda on the end of my rope. my specs are Ryzen 7 5800X Gigabyte RTX 3060 Gigabyte motherboard B550 DS3H Gskill 32gb of ram Samsung 970 EVO NVMe M.2 1tb SSD I do have a Samsung 870 EVO Sata 2.5 2tb SSD If any of you have any tips or things that I can do please let me know. I am open to learning how to clone windows and trying to move it to the M.2 Is there a way I could clone windows that is on my Laptop to the M.2 and then just boot off that in my new PC? You guys are amazing, and Thank you for everything that you do!!

cpu core 2 quad q8400 mobo asrock g41c-gs ram ddr3 4gb 1333 psu korean 500watt hdd maxtor 250gb gpu 750ti 1gb i just built this scrapheap from used pc parts, and i cant boot from a 4gb kingston flashdrive. i downloaded 64bit windows7 iso and i used rufus 3.4 and poweriso to make it bootable , but both times when i boot from the usb from the bios it just gets stuck in a black screen with a blinking cursor. if i dont use the bootable usb, i get an error saying that windows cannot repair this computer automagically, the hdd is mine i know i had windows 7 there 5 years ago. i have no access to a dvd/cd drive , any suggestions will surely help.

Hello! I have a problem booting windows 10 from/on m.2 ssd. When I install windows (from usb) after finishing installation it restarts and says that there is no proper boot device (PHOTO). But when I checked my drive in windows there were windows folders installed in m.2 drive. HOW??!??!!?? WHY IT CAN'T BOOT??!!!! Solutions tried: Installing and booting win10 from other pc's. FAILED Bios update. FAILED Formating drive. NOPE!! The result is one: PC specs: MOTHERBOARD - B450M-HDV (BIOS 3.30) M.2 SSD - ADATA XPG GAMMIX S11 PRO CPU - RYZEN 7 1700 GPU - RX580 8GB SSD - KINGSTON A400