Search the Community

Hi, so my pc keeps freezing randomly it doesn't matter if I'm gaming or if it's on idle. Sometimes I can use it for an hour but most times it would freeze minutes after or during start up. When I turn it on it would keep restarting until it gradually stays on. I tried updating the drivers and the bios. I have also had tried memtest and sfc everything seemed fine. Intel i5 3570 Rx 570 8gb ddr3 1600mhz H61K-M 500gb hdd 450w true rated gs450pro

specs: PSU: Corsair RM750X CPU: Ryzen 9 5900X RAM: Crucial Ballistix 2*16GB 3200MHz MoBo: MSI B550 Gaming Plus Storage: 128GB SSD(Win10) 1TB HDD 2TB SSD GPU: KFA2 GTX 1070 I have upgraded my CPU and Mainboard yesterday and everything worked fine. Today my PC crashed without a bluescreen, going into a bootloop immediatly. This works as follows: PC gets switch on. BIOS is ok. The Windows startup screen, where the small dots are running around in a circle shows up. PC restarts without notice. Even Windows Automatic Repair cannot circumvent this issue, and I it also fails to boot an external Drive to reinstall windows in the same manner. What I`v tried so far: Booting with each of the RAM Sticks individually. Booting with each harddrive individually. Updating to the latest non beta Bios. Remounting CPU Cooler (Shadow Rock 3) Booting external Drive to reinstall windows. Nothing of those things worked, the system is stable in BIOS though. I hope some of you guys can help me out. Update: The system seems more stable, the less peripherals are connected. I got to boot my external drive and reinstall windows. Went back to crashing almost immediatly after installing Chipsetdrivers.

I recently bought a Samsung evo 970 plus m.2 PCIe NVMe drive -500 GB (Got it for 77 USD in a sale). Cloned my 1 TB toshiba HDD using the Samsung software. Booted from the ssd after erasing the HDD(used DBAN). Today I decided to run diskpart after initialising the HDD for the first time, and noticed that both my drives were in RAID for some reason. I mostly use the game for development (currently a student), and gaming. Didn't think I needed RAID. So I went into the BIOS and changed the SATA operation setting from RAID on to AHCI and now my laptop's in bootloop. Reverted to RAID on, but still no luck. I have a dell support assist pen drive in case I need to re-install windows. Could someone please help? (Also, should I keep the setting for SATA operation RAID on , or in AHCI? ). System Specs: Alienware 15R3-2016 8 GB DDR4 Ram Intel core i5-6300 HQ Nvidia GTX 1060 1TB 2.5" HDD 500 GB PCIe NVMe M.2 Samsung 970 Evo Plus SSD (Newly added) Planning to use SSD as boot drive, and HDD as storage drive.

Hey guys! I've been looking around for answers for quite some time and I haven't found any solutions or any similar question about my problem. I built my computer fairly recently and I've been using it for about 2 weeks now, I haven't done overclocking yet beyond changing the speed of the RAM. This morning I tried to check temps using the Ryzen Master software to compare it with what I was getting from HWMonitor, and everything was still running fine. Later on, I was doing some work stuff and decided to get up and rest for a while and left the PC running. I decided to get back to work and saw my PC went into rest mode. It didn't want to wake up and the debug code E0(S3 Resume is Started (called from DXE IPL)) was showing on the motherboard. So I had to do a force shutdown and I booted into OS then it suddenly shut down and restarted again. The debug code also changed from the usual A0(IDE Initialization Started) or 24(Reserved) to D3(Some of the Architectural Protocols are not available). I got into the OS found out that after uninstalling Ryzen Master it was back to the usual codes. But now every time I boot, after a few seconds it'll shut down, the fans would stop and it would try again. It would boot into the OS and run programs for a few minutes then do it again. Here are the solutions I've tried: 1. Go into BIOS and go back to default settings: FAILED still boot looped 2. Took out the RAM and swapped their places, ran everything at stock, and swapped out my UPS for a better AVR: Test Ongoing; seems stable for now... I'm worried I might have killed my CPU, but judging from the temps, voltages, and speeds I'm seeing in TaskManager and HWMonitor, they seem to be okay. I'm hoping my last solution works out in the long run. I just hope somebody out here can tell me what could have potentially happened to my PC with all that's going on. Here are the specs btw: Ryzen 2600x with Stock Cooler 2x8GB G.Skill Trident Z RGB 3000MHz MSI GAMING Z RTX 2060 Gigabyte X470 Gaming 7 WiFi EVGA Supernova G+ 650W Samsung 970 Evo Plus 500GB WD Blue 2TB NZXT H500

Hello, I recently built a new PC but I keep getting blue screens, graphics card driver crashes, and boot loops. I have reinstalled different windows versions (Home, Pro, Pro N) several times but it didn't help. My system components are: Asus ROG STRIX B450-F Gaming AMD Ryzen 2700X Corsair Vengeance LPX 3200Mhz 2 x 16GB 2x Samsung 850 Evo 250GB Gigabyte RX 580 Gaming 8GB be quiet! Straight Power 11 650W The blue screen errors are: irql_not_less_or_equal pfn_list_corrupt kmode_exception_not_handled kernel_security_check_failure I use Windows 10 Pro N and the latest AMD drivers 20.1.3, I also tried 19.2.2, but there are the same problems. If I install the latest chipset drivers, it gets even worse, the picture often freezes, and the graphics card drivers crash even more frequently. I have boot loops relatively rarely and if I can end them with a reset. They arise when I am in Windows, then the computer suddenly goes out and boot loops IMG_2752.mov I don't know what to do, so I'm grateful for any help

Hello there! Story : I have a really old (Pentium g2020 baytrail based) PC. So only in the last month, I bought an SSD. Then I installed Win10 and everything. But then I wanted to change the SATA controller from IDE to AHCI, as the latter one us supposed to be better for SSDs. So I did that after some googling. Then it ran fine. Then I shut it down. But that was its last shut down. Since last 4 days it is stuck on boot loops, in first try doesn't show anything, in second try the cpu fan turns on and immediately off and in third attempt it shows the logo - first screen, (the one that says press DEL to go to BIOS settings). Then it just shows a blank page for a brief time, and then the cycle repeats itself all over again. Thanks for your time.

Yesterday i shut down my PC and when i today wanted to start it up it wouldnt boot. Now it gives continue restarts/bootloops. Already resetted the cmos and removed/replaced the BAT didnt work... Anyone knows what to do now?

Specs -I5-2300 2.80ghz -Lapcare H61 Motherboard(Lapcare LMBH61) -8gb 1600mhz transcend 1.8v running at 1333mhz Ram#1 -2gb 1333mhz kingston 1.5v Ram#2 -Msi Gtx 750ti Oc edition(running at stock clock) -Corsair vs450 PSU(Old psu umax 450w) -3*Hdd 7200rpm (1tb+500+500) -Kingston 120gb ssd 1 case fan 60mm So to my problem.I used a gigabyte h61ms motherboard it works fine until i just cleaned the cabin and refit all parts one by one and turned on it shows unlimited boot loop ,declared dead motherboard by computer repair shop . So he told he cant get good motherboard in my region and he put local motherboard that is lapcare H61 motherboard.when it arrived when i turn on my computer gpu fan is not spinning.so i removed gpu and ordered a new fan for gpu.then used computer with intel hd 2000 graphics for 2 weeks.but it still bootloop for 5-10 seconds and boots fine i use a old local umax450w psu.Then after replacing fan and put gpu then the boot loop increased to 30 second .i thought it might be bad psu so i replaced psu with corsair vs450 but still same problem.each day the boot loop time is increasing.it only affect if i take about 5-6 hour break(turned off) from using pc.Please help is it the problem with cpu?? Since this motherboard is local brand i cant update bios.Also there is no option for ram timing or ram voltage control in the bios of this motherboard.i cant even see cpu temp nor control cpu fan speed with this local motherboard. I posted same post in reddit one of the user tell its the ram issue.So i testing ram result below. After testing Slot1# and slot#2 empty no display but no bootloop Slot#1with 8gb ram no bootloop boot fine Slot#1 with 2gb ram bootloop 1 times and ran fine Slot#2 with 8gb ram bootloop 1 times and ran fine Slot#2 with 2gb ram bootloop 1 times and ran fine Slot#1 with 8gb and slot#2 with 2gb bootloop 1 time and ran fine Bootloop 1 time means while starting pc it turn off for 1 time and boot normally I dont thinks its a ram issue so i clear cmos battery.i hope this problem is fixed. Also if i use single ram pc works fine no bootloop.Any way to use both ram without bootloop please help! My reddit post link--https://www.reddit.com/r/techsupport/comments/ebgb1b/pc_bootlooo_for_10_minutes_repeatedly_and_boots/?utm_medium=android_app&utm_source=share

So after using my htc sensation for over 2 years, its finally giving me problems. Every time it boots up to the htc logo, it would make a small beep noise and then reboots its self over and over again. I have tried going into recovery and doing a wipe coach partition and wipe data/factory reset but its still looping. i have never root my phone to flash any types of roms on it. im an extreme noob to this is there anything i can do to revive my phone? here's a picture of my hboot if that helps at all