Elements

Meh, I forgot to add the GPU block Anyways, it is the enthoo primo in the PCPartpicker I'll actually probably end up doing something like Post #17, but thanks for your help!

Alright; personally I do like the look of a top inlet, so I'll probably go with that However, how would a port function as both an inlet and an outlet?

Alright, thanks!

Alright PCPartpicker link is here So the res will just need to have both the inlet and outlet on the bottom?

Apologies; if the inlet is on the bottom, wouldn't that let the pump run dry, since the res is (supposedly) above the pump?

Alright, however, someone else has said (in another forum) So will this be an issue? D:

(Apologies couldn't watch the video b/c bad internet) Isn't that in a horizontal setup? I imagine that the situation would be different when placed vertically Does this have a compression fitting built in, or will I have to attach that to this?

I assume I'll be OK with the standalone tube res option, correct? What would I need for a fill/bleed port? I haven't anything that suggests this on the photon; would you mind linking me something? Also, do any of you know the optimal airflow configuration I should have? Thanks!

Hello all, I'm looking to build this within the next couple weeks. However, after looking at a couple threads, it seems mounting a tube res will not be as simple as I thought: I assume that the water should be flowing towards the pump, which is below the res (correct me if I'm wrong), but it seems that not many reservoirs are capable of having a bleed/fill port and a top inlet without something akin to a internal tube and some sort of (?) extension fitting. If this is the only option, would someone mind putting together the necessary parts? Also, what would be the optimal airflow configuration for this? Intakes on the top and bottom and front to back on the other fans? Thanks in advance!

Alright; thank you so much for your help!

Alright; I apologize for bothering you so much, but I have another fan available; where do you recommend I put that?

Alright, thanks for your help! You previous statement of was where I should put my fans, correct?

Alright; phantek's site states that "Up to 70mm thick radiator with push/pull configuration" can be used; does this mean I have 70+25=95 mm of space if I only use top fans in pull configuration, or just 70 mm? Also, are those the spots I should put the fans in? I do have one extra fan included with the case; any recommendations for placement of that? Thanks for your help!

Alright; the main reason I chose the SR1 is it has slight performance gain over the ut60 at sub 800 RPM, and I am trying to get a silent case so yeah The case on has 70 mm of clearance for roof radiators in the case, and I'd rather not mount fans outside the case, so I chose the ST30 :3 Also, I'm planning on having the rads in pull as exhausts and 4 of the included fans on the front/back as intakes; would this provide sufficient cooling for the non water-cooled components? Thanks, Elements

Alright, thanks! :3 The pump is strong enough, right? Also, do you recommend any anti-corrosives, or is that not necessary?