yaboi824
-
Posts
87 -
Joined
-
Last visited
Content Type
Forums
Status Updates
Blogs
Events
Gallery
Downloads
Store Home
Everything posted by yaboi824
-
I'll try doing that, and will lyk how it goes. Yes I believe so I put the server name's IP into the port forwarding using both protocols and port 19132.
-
Hi all, so I am on version 1.20.15 of MC Bedrock, I’m running Turnkeys MineOS which is set to run BuildTools-latest. I keep getting the message can’t connect to server outdated. Anyone able to help? Also I have enabled port forwarding for the server for my friend but he is completely unable to connect they are running off of Minecraft PE.
-
I don't know when it started but I have been seeing this weird where the screen would blur the words out on its own and I would have to stick my cursor over that word to then see the words refocus and read them then once I move the cursor away it un focuses again, any way to solve this? Thanks, and happy holidays!
-
Thank you, I had to go with the more expensive one because it didn't have an SPDIF cord and the other one did came out to be cheaper than if I bought the cheaper one and then buy the SPDIF cord.
-
I found these two although I am not sure as to which one would be better. https://www.amazon.ca/gp/product/B08Z3C3LGC/ref=ox_sc_act_title_2?smid=A34YN9BZJYWN51&psc=1 or https://www.amazon.ca/gp/product/B08XV2B6T4/ref=ox_sc_saved_title_1?smid=A3BMEMFMBV9Y3M&psc=1
-
I am on a budget and everything I have works well, for now spending a couple bucks is fine a few hundred not so much.
-
Ah I see now, that’s another good option. Would it work as the same as the ARC?
-
I see, to be honest rolling up a cable and saving a few bucks is fine, and optical sounds nice but the recover doesn’t even have that unfortunately, so the HDMI ARC would be the best route to go.
-
Will a long HDMI cable be bad for the sound performance? And powering it by the USB on the TV is a good idea thank you for that. unfortunately no the stereo box only has RCA I checked that yesterday too as the TV itself has a optical, would've been nice if it did have optical though. (https://www.samsung.com/ca/lifestyle-tvs/the-frame/highlights/ this is the TV although its a couple years older than the current)
-
Thank you, Would this be a good ARC Extractor? https://www.amazon.ca/Extractor-Converter-Support-Digital-Coaxial/dp/B08XV2B6T4
-
Hi all, So I have a slight issue and I don't know how to go about fixing it or I do but just seems to simple... So I recently got a new tv with E-arc with the HDMI plug but the stereo for the surround Speakers are all RCA, DO i just need a normal HDMI to RCA cable to get the sound into my stereo over the E-Arc. Very new to how E-Arc even works. Any help appreciated.
-
Armoury Crate it is not connected to the internet, never had this problem before and my lights that were controlled by it were working but I unplugged them to do some maintenance when the PC was off but now I turn it back on they light up and then turn off when armoury crate boots up. -
Thank you, I’m now in the text console and very confused as to where to go next.
-
Thank you
-
I was trying that and it wasn’t working properly I’ll try that if this attempt doesn’t work.
-
Should I “create 16gb swap partition on boot devices” it says this so I’m a bit confused
-
Ok thank you, any other info I should know before I continue? Also since it’s an old workstation that I transformed into a NAS would using BIOS be better than using UEFI?
-
Ok thank you, any other info I should know before I continue? Also since it’s an old workstation that I transformed into a NAS would using BIOS be better than using UEFI?
-
Would an 80gb HDD work for this instead?
-
Would an 80gb HDD work for this instead?
-
So I’m trying to set up a NAS and I keep getting this message (look down below in the image) what am I doing wrong? I set it up to RAID 10 since I have 4 HDD and I’m putting it into BIOS mode instead of UEFI mode (for True Nas) any clues as to what it’s doing?
-
So this has been happening for quite a while now, where I would go to click my power button to put my pc into sleep and the monitor would shut off, but the fans and lights would remain on and the fans would run at a reduced rate. Usually it is only the RAM LEDs that stay on during sleep. When I go to boot the system back up after it going into one of these "false" sleeps the monitor doesn't pick up the GP (GTX660) and then I have to reset the PC (have another power button for that) and it resets the PC and goes to the BIOS, fun thing though my monitor after a failed sleep doesn't detect a signal so I have to go and usually plug in an old monitor into the DVI port and get into the bios that way, my BIOS has all the UEFI settings enabled (thought that would stop it from going to defaulting to the DVI port on the GPU. I have a GTX660, R7 5800x (yes I know big bottle neck, but can't get a new GPU yet) X570-e STRIX ASUS 32gb of 3600Mhz RAM, 8tb HD 500gbssd, RM850x PSU. Please help.
-
I have a Dell Inspiron 3521 and ever after I installed windows 10 on it the screen has been acting glitchy all drivers are up to date, any insight as to what went wrong? Edit: fixed the issue
-
So i have an FLT 360 reservoir and couldn't help but notice some of EK cryofuel has started to condensate at the top of the res towards the fill port, should I be worried, if so what should I do about this? Edit: I just realized I am dumping the warm water into the res and not directly into the Rads, I'll have to reverse the pipes to fix this issue.
-
can the dp port on a gtx 660 from 2012 be the default display
yaboi824 replied to yaboi824's topic in Troubleshooting
For some reason mine doesn't it only goes to bios using an HDMI or DVI output and not a DP output.
