EnviL

Yes i changet it before to speakers in asus realtek audio, matter fact it won't work at all. And as you sadi, it will be solution to connect it right into mb, but it has RCA wires

Hi, so i bought a new pc (MB: asus tuf b550 wifi plus-(anything else poitless)).I also got speakers-[Ballista Unity - GS310] which got, 2 satellites, subwoofer and Control Box... Every part i connected to control box from which comes out one 3.5 mm jack. The problem is, that i've tried to connect that 3.5 mm jack from control box to motherboard, but each 3.5 mm port are for different parts of speaker setup. It basically means, if i connect that one jack into hole for example for front speaker. it makes my second speaker and subwoofer offline and it only uses that one satellite for left and right speaker. Any tips how to fix this to my whole speaker setup beign active? Thanks!

Thak you a lot, i'll try it.

3 of them (3 of a 6).

Hello, so i got a new HDD for my 2021 biuld for some videos and less important files. I already have a 2x m.2 SSD disks in 2 m.2 slots installed... (MB-ASUS TUF B550 Plus wi-fi). The problem is, that i've tried everything but the system can't identify the disk. I even complainted the disk for a new one, but still no success. I've tried different brand new cables for connection between mb and hdd but again no success. The disk is spinning, so there is no problem with power connection. There's no problem in disk manager because the disk isn't showing up in bios either. I have no other idea what to do, please give me some ideas and hope...

dont worry, thx for help!

thanks, ill try it

so i installed it and again the disk hasnt showed up

ill try it, thanks a lot!

Hi, so i bought a new Segate Barracuda 2Tb for my new pc build- R5 5600x, ASUS TUF B550 pro (wifi), 16 gb ram 3600mhz, gtx 980 4gb, Samsung ssd 980 evo 500gb, WD Blue SN550 1Tb for photos and videos. In my MB box was 2 cables 6gb/s for SATA connection (i tried both), i connected hdd to power and sata on MB, loadet up the pc, but nothing showep up in disk manager or BIOS either. I have tried to reconnect cable to different SATA ´holes´ on MB (there are 6 of them) and the second cable, but it was same every time and nothing showed up. At the moment the HDD is outside of case (connected to the pc) and its running. There are vibrations and little noises like it may be, but disk not showing up. Can please someone help me with this issue, i have no other idea what i can do, thanks!

Oh ok, thx for the help!

So there is no way to fix it?

Those red pins with -pwr+ sign? If so and the pc boot how do i fix it to booting up pc normally by pushing power up button?

Yeah plugging it in the red ones is what i also been trying at least 3 times, but nothing happends

What do you mean exactly? Where to plug it or how to use it?