Jump to content

progincs

Member
  • Posts

    6
  • Joined

  • Last visited

Awards

This user doesn't have any awards

progincs's Achievements

  1. So far so good! I got into BIOS! Thanks again everyone who commented.
  2. Ohhhhhh, the blue tabs are supposed to come off. Wow, I didn’t think it would be that easy of a solution. Thank you guys so much! I really appreciate it. I’ll let you know if that works!
  3. I’m not really sure how to do that. It doesn’t look like that’s possible. I don’t see any DisplayPort plugins on my graphics card.
  4. Not really sure what you mean by “plugging it in the motherboard port.” If you are referring to the DisplayPort/DVI-D cable, then yes. There is no port on my GPU for a DisplayPort cable to be plugged in directly.
  5. Nothing stays lit up after the first second or so. The DRAM light turns orange and then goes off, the CPU light turns red then goes off, the VGA light turns green then goes off, and the BOOT light turns white then turns off. Those events happen in that specific order. I am aware, every other power supply from a known brand under $150 was sold out. I will likely be upgrading it when there is more stock.
  6. Hello, Earlier today I built my first pc. Once all of the components were installed, I turned on my monitor hoping to access the BIOS page. However, pressing “delete” did not do anything and I was instead greeted with a blank screen that said “No signal detected” in the corner. No matter what I do, I can’t seem to get an actual display on my monitor. I’ve tried using a DVI-D connector instead of DisplayPort. I’ve reinstalled almost every component of my computer to make sure everything was correct. I’ve tried unplugging and plugging back in the DisplayPort and power cords a countless number of times. I’ve tried using a different monitor with the same DisplayPort and DVI-D cables (I only have one of each, but the DisplayPort cable is brand new and the DVI-D cable works when I plug my monitor into my laptop). I’m a little worried I damaged the CPU when installing the cooler due to how hard I was pressing down or damaged the GPU when installing it because of its size, but the motherboard has indicators that light up if there are any problems with components, and so far nothing has lit up. Thank you in advance. Parts list Monitor: BenQ ZOWIE XL2411P Motherboard: ASUS Gaming X570-Plus CPU: Ryzen 5 3600 GPU: Sapphire RX 5600 XT Memory: 16GB OLOy Warhawk Power Supply: Thermaltake 600W 80+ HD: 2 TB Seagate SSD: 512 GB XPG Case: Coolermaster TD500
×