Plasma_43
-
Posts
16 -
Joined
-
Last visited
Plasma_43's Achievements
-
Liquid Freezer II is certainly a great option, but I'm going for a certain aesthetic in my build, but I'm simply unsure when it comes to which radiator form factor I want.
-
I'm looking into building a system with a Ryzen 3700X. I plan to do some mild to moderate overclocking, and have therefore chosen to use a closed-loop all-in-one cooler; however, I am undecided on which form factor to use. To maximize overclocking performance, I have been looking into the Kraken X63, but I am not sure a 280mm AIO is even necessary, because the 3700X is a 65-watt part, meaning a 240mm AIO would do fine. What would be the best option? Is a 240mm AIO adequate for the likes of a 3700X, or should I opt out for a beefier 280mm cooler?
-
I am planning to use either a Ryzen 7 3700X or 3800XT in the computer I will be building around boxing day. I want to do some moderate and maybe even some heavier overclocking, and I have chosen the NZXT Kraken X53 to enable this. When it comes to AIOs, there are three key factors involved in the degree of cooling such a device can provide; the pump, the radiator, and the cooling fans. I have confidence in the pump and the radiator the X53 uses, as it is designed by Asetek and has practically become an industry standard at this point. Subsequently, the only variable left in the equation is the choice of radiator fans. Of course, the X53 does come with its own fans, but stock fans do not have a very good reputation when it comes to cooling potential. That's not to say that the NZXT's Aer P fans that come with the X53 aren't good fans, it's just that they tend to be very noisy at higher speeds. Has anyone ever used a fan that could work as an alternative to stock radiator fans? Possibly something with good CFM that still maintains a high static pressure?
-
Very good to know. What make and model is the AIO you are using?
-
For sure. I have already considered the Corsair ML140, but ultimately decided that they don't suit my needs, as their performance is low in comparison to noise levels, due to rather poor fin design. I will continue to look at radiator-optimized fans, but the NF-P14s will continue to be a very viable option.
-
I've looked at the NF-P14s you mentioned earlier, and they look like really good fans, regardless of what configuration they are in, whether that would be case fans or radiator fans.
-
I was talking about the NZXT Aer P 140mm and 120mm when paired with a radiator.
-
I appreciate the attention to detail. When it comes to why I chose an Arctic fan as an alternative, I found a well-performing static-pressure fan at a very reasonable price. This is just one I have in mind though, and I will look into the Noctua Redux NF-P14s. I want to avoid airflow fans when looking for radiator fans, as they simply cannot mesure up to static-pressure fans when used on a radiator.
-
I'm asking about the fans when attached to a radiator.
-
I am planning on purchasing either the Kraken X62 or the Kraken X52, and I am unsure about the performance of the stock fans, the NZXT Aer P 140mm and 120mm respectively. If they aren't sufficient for a radiator, I have an alternative from Arctic in mind. Anyone who uses these fans with on a radiator, how has the performance served you so far?
-
I really appreciate the attention to detail. When it comes to fans, i've heard good things about NZXT's stock radiator fans, but if those don't work, I found an alternative from arctic. Do you know how the NZXT fans fare when paired with a radiator?
-
I am currently planning on buying the 3700X and doing a moderate overclock; however, I am planning on purchasing all the parts around boxing day, and depending on the performance and price of the 3800XT, I might opt to purchase that one due to its higher base clock and better overclocking potential. So if I end up going with the higher wattage CPU, I should probably get the 280mm AIO to balance it out, right?
-
I am debating whether or not I should purchase a 240mm AIO or a 280mm variant. My question is how much more cooling can 40mm net you? I am planning to use either a Kraken X63 from NZXT or Kraken X53 respectively. I am also planning on using the Meshify C as my case, and I am going to put the radiator in the front. With the Meshify C, if you have a 280mm radiator in the front, there is no space for anymore front case fans, whereas with a 240, you can squeeze one more in there. If i can, I want to squeeze another intake fan in the front if possible, to maximize intake capacity. Bottom line; does 280mm give you a tangible boost in performance when compared to 240mm, or should I simply get the X53, put in an extra case fan and call it a day?
-
Sounds good, thanks!
-
Meaning I should probably increase my intake?