Jump to content

Wyzen

Member
 View Profile  See their activity

  • Posts

    8

  • Joined

  • Last visited

Awards

This user doesn't have any awards

Wyzen's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Wyzen
    Wyzen changed their profile photo
  2. Wyzen
    Okay so ran memtest and zero errors However PC is consistently restarting itself after around 35minutes to an hour of being on, it has improved but the problem hasn’t fully been fixed What would you suggest now?
  3. Wyzen
    It stays on for longer now (about an hour) but still restarts randomly, so It’s getting better but not 100% stable I’ll try memtest86 and let you know.
  4. Wyzen
    Okay did all of this and disabled dcop PC booted and everything was perfect, lasted about an hour then restarted (all I had open was a YouTube video for the duration) , so it is working at least better now so thank for that Any idea what else I should try from this point?
  5. Wyzen
    Done all of this now, apart from ddu as I’m unable to get into safe mode/desktop reliably. Any idea what I should try next?
  6. Wyzen
    I’ve set the ram frequency and all the voltages, still having the same problem in regards to DDU I managed to get onto the desktop for about 5 minutes but then it restarted again, It’s really difficult to reliably to get into safe mode/desktop
  7. Wyzen
    Looking into the DDU now. Will let you know once I’ve done that Where can I find the disable xmp/dcop options? I set soc voltage to 1.1 and dram to 1.35, still getting the random restarts Wasn’t sure what you meant by ‘and try 2933’ apologies I’m still learning
  8. Wyzen
    Red indicate CPU, Yellow/Amber indicates DRAM. I’ve cleared the CMOS and it hasn’t fixed the issue I haven’t used DDU before is there anything I should know? The BIOS is currently on the most up to date version, I could try to update again or update to an older BIOS my only fear is that my PC restarts mid update and fries my motherboard (As it restarts on the BIOs settings screen too) Disabled fast boot and it hasn’t fixed the issue. I appreciate the help so far, hopefully we can diagnose the problem.
  9. Wyzen
    IMG_0013.MOV I’m running as follows: Motherboard: ASUS ROG Strix B450-F CPU: Ryzen 7 2700x RAM: Corsair Vengance LPX DDR4 3200 Mhz 16GB (2 x 8 GB) GPU: GTX 970 PSU: Corsair CX600 (600w) PC ran perfectly fine for 4 months no problems, however I got home and tried to turn it on one day, to see windows failed to load correctly. I restarted it and again zero problems. I had some issues with using FL Studio, to which I was told I should make sure I have the latest BIOS update, downloaded and installed, zero problems. However for the past day my PC fails to boot to desktop and gets stuck in loops, upon inspection of the motherboard I see a red blinking led, followed by a yellow led, which can carry on for sometime, occasionally the led will turn white and I hear 1 beep, the computer will then successfully post, however it usually restarts out of nowhere again (either on windows loading screen or even the BIOS screen). Last night I managed to get to the desktop and I downloaded the latest GPU, Audio and chipset driver, PC ran for the rest of the night (6hrs-ish) no issues, I woke up today turned it on again no problems and it lasted for about 2hrs before again restarting itself out of nowhere and now I’m stuck in the post red/yellow light loop. Any help will be appreciated as I’m stumped.
×