i_HaD_A_sTrOkE

I used XMP II and was able to get 3466 MHz and VCCSA was set to 1.35V already. Sorry its been a while, got busy with life and had to work with defaults for a bit.

Ok, weirdly enough just using either the 8Gb or 16GB sticks 3600 MHz would fail and still boot into safe mode when I was troubleshooting. So what is the point of paying for higher speeds if they are probably not going to work? What would be a reliable company that 3600Mhz would work from.

I just took some screenshots. They are two different manufacturers, one is Micron Technology and the other is indeed Samsung.

Hello, I have an Intel 10900 with an Asus Hero Maximus XII. The memory modules I have are DDR4 2x8GB and 2x16GB Corsair Vengeance modules with the same timings of 18-22-22-42. They both have 1.35V as well. The only difference is the 8GB modules are version 3.31 and the 16GB modules are version 4.32. I know I should just use completely same sticks but I needed an upgrade from 16GB memory and bought the 32GB assuming since they had the same timings, voltage, speed, and company it would work. I tried XMP I and XMP II profiles but it would just boot into safe mode when I would change the speed to 3600 MHz. Any tips on what I can do now?

Sorry that is what i meant, i did convert it from legacy to uefi but it didn't change anyrhing besides being able to boot with default settings

Temps are around 30°C idle

I'm afraid to do that, lmao spent so much on it already. But would it still run if the pins were even a little messed up?

CPU: Intel i7 10700k Mobo: Asus Maximus XII Hero GPU: Asus STRIX 1080 8 GB RAM: 32 GB CPU cooler: Corsair H100i v2 Storage: 250 GB Samsung 850 evo PSU: EVGA 750 watt Gold I updated the BIOS and also reset it to default, but the motherboard and CPU are new so I don't know what resetting to default would do. I checked that Intel Turbo Boost was also activated. I reinstalled windows keeping my files. I do not know what to do now, is it a dead CPU? Did I eff up any pins on mobo during installation, even though it boots into windows and runs?

nothing changed, the clock speed still at .8 GHz

sorry just finished it, I was out for a little bit but let me see what happens.

CPU speed is still stuck at 0.8 GHz, power setting is on game-turbo. Tried resetting the BIOs to load default settings, but would not startup because I had to enable CFM and change the option to read Legacy drives. Not sure what else to do.

https://www.asus.com/Motherboards/ROG-MAXIMUS-XII-HERO-WI-FI/HelpDesk_BIOS/ They want me to use a USB to update it. How do i get bios to recognize my drives with uefi?

I just updated all of the drivers I possibly could from the Asus website except the BIOs. How should I update the BIOs. Also would choosing the Legacy option in the BIOs boot menu be messing up anything?

Valorant, R6, war zone

I planned on gaming on it, haven't gamed for a few weeks but wanted to start after my CPU and motherboard upgrade. Could my graphics card also be a reason for the lag?