Jump to content

WanderingFoe

Member
 View Profile  See their activity

  • Posts

    29

  • Joined

  • Last visited

 Content Type 

Everything posted by WanderingFoe

  1. WanderingFoe
    I’ve had it awhile but it sat sealed in original box. I’ve tried every combo with ram slots except mixing ram brand/types like Corsair vengeance with ripjaws V or should I? I’ll try cleaning out the slots and see what happens
  2. WanderingFoe
    Hello. Im working on my first build and currently just trying to have it work as a test bench like setup with only cpu, cpu cooler 2x8 ram sticks and cpu 4+4 and 24 pin power connected, cpu fan into cpu fan #1. I’m using an evga z370 motherboard and I tried using an intel celeron g4900 just to get it to boot. I got a post code 53, memory initialization failed, no usable memory. I tried switching the ram slots from 2,4 to just 2 then 4 and 1,3. I went from g skill ripjaws V to Corsair vengeance rgb pro to g skill trident ram. I tried putting in an intel i5 9600k, I know it needs a bios update, but I get the same post code every time. I’m not sure what else to try, the only thing I haven’t switched was the motherboard. I’ve looked at the cpu pins and they all look fine. I can post pictures if needed. im just not sure where to go now, do I need a new motherboard or am I missing something? Help is greatly appreciated. Also, sorry this is so long, I just wanted to be thorough with what I’ve done
  3. WanderingFoe
    Should I go looking for a new one so I can get it shipped quicker or is there any hope in that one?
  4. WanderingFoe
    I’m using an evga z370 ftw it gave me a post code 53, memory initialization failed, no usable memory. I tried to change slots, started at slot 2 and 4 like stated in manual. I even bought another pair of ram sticks still same error. Messing with the cpu was the last thing I wanted to do. The first ram was g skill ripjaws V then I tried Corsair vengeance rgb pro. Running out of ideas
  5. WanderingFoe
    It was covered in thermal paste, I wasn’t sure if I would damage it by wiping the underside but I’ll give it a try. Would that equate as a broken pin in terms of errors?
  6. WanderingFoe
    Hello. i was getting a memory error and was told to look for bent pins and since this is my first build I’m not too sure if I’m missing something. The motherboard pins look good to me but I bought a cheap cpu and didn’t look great. I’ll upload a few pics. Help would be greatly appreciated!! thanks.
  7. WanderingFoe
    Kind of dumb question but can I check for bent pins without removing cpu? The less I have to mess with that the better
  8. WanderingFoe
    A bent cpu pin would cause a memory error?
  9. WanderingFoe
    It’s error light #3
  10. WanderingFoe
    I first used slot 2 and 4. I saw someone said ram worked only in slot 2 so I tried a single channel in slot 2 and then 4
  11. WanderingFoe
    No, I’m trying to get it to boot for the first time. Most of the officially supported memory is over $200 and I’m just wanting either 2x8gb or 2x16gb for now
  12. WanderingFoe
    Hi. I finally got my system put together and I get a post code 53, no usable memory detected. After some researching I think the ram isn’t compatible with my motherboard, evga z370 ftw and g skill ripjaws v ram. I’m trying to find memory that’s compatible but evga lists only quad channel configs. I found something I can get today I was hoping someone could look over to make sure this is compatible. Corsair venegence rgb pro and model number is: cmw 16gx 4m2 c3000 c15 there isn’t any spaces I just put them in for easier reading thanks
  13. WanderingFoe
    Is this some kind of troll thread? There’s people that come here for help, doesn’t sound like your trying to make a build or anything
  14. WanderingFoe
    I tried switching alternating the sticks in 2 and 4, used 1 stick in 2 and then tried it in 4. Even tried alternating sticks in case 1 was bad but same thing. Post code 53. Guess I’ll try 1 and 3 tomorrow but probably gonna need new ram
  15. WanderingFoe
    Same error
  16. WanderingFoe
    Hello. i just got my parts put together in a test bench and when I turn it on I get a post code 53. I checked the manual and it says memory initialization error, no usable memory detected. I did a search and and one result said it’s not supported but they were able to run 1 stick from slot 2, just not both. I was searching memory from the official evga website but when i get it on the store the part number doesn’t match. I was wondering do I need new memory, and if someone could recommend compatible memory in a 2x8gb or 2x16 around $130 or less. Or if there is another resolution. I’m using an evga z370 ftw motherboard, current memory is g skill ripjaws v ddr4 3200 thanks! Sorry for beginner question this is my first build
  17. WanderingFoe
    I just got it. I wasn’t pushing the screws hard enough on the backplate. Thanks for the quick reply though
  18. WanderingFoe
    Hello. im working on my first build and I’m trying to set it up on a test bench before I put in the case. I’m having trouble attaching the cpu cooler on the motherboard. I have an evga z370 ftw and a Corsair h60. I’m trying to attach the backplate but the screws just don’t line up with the holes on the motherboard. I’ve seen people say that it will work on a lga 1151 socket so I have no clue what I’m doing wrong. The screws move a little on the backplate but even that doesn’t help. help is greatly appreciated thanks!
  19. WanderingFoe
    So I just plug in the SATA cables into the “intel SATA 6g ports” and then connect the fan and radiator to the cpu pwm like above?
  20. WanderingFoe
    Hello. Im back with another beginner question. I’m setting up a test bench to see if everything boots. I’m wondering how to power the cpu cooler, does it draw power from the 24 pin or what do I need to plug in to get the fans power? My cpu cooler is a Corsair h60, so I need two 4 pins connections, one for radiator and one for fan. I’m using an evga z370 ftw motherboard and evga 850 g3 gold psu.
  21. WanderingFoe
  22. WanderingFoe
    They do have markings but it says MB and MB or cpu and cpu on them. Unless it’s in some kinda fine print
  23. WanderingFoe
    Awesome! Really appreciate the quick responses. You all are lifesavers
  24. WanderingFoe
    Hi. Im doing my first build, well test bench atm and I tried googling this but I can’t find anything helpful. I’m plugging in the cpu power cable and does it matter what side goes to motherboard or psu? One side is a 4+4 pin and the other is 8 pin. I’m using an evga z370 ftw motherboard and evga 850g3 gold psu. Sorry in advance for such a beginner question but people have been helpful here thanks!
  25. WanderingFoe
    Update. I found a cooler master i30 cooler for about $15. Would that be sufficient for test bench for the i5 9600k?
×