itsjeff

What about the afterburner?

It happens in games of course i reach 51c.

No because i have my fps set to unlimited in the menu, and i see my gpu power and usage at 99% and gpu power is like 101%. So a lot happening in the menu.

So i have my evga ftw3 ultra 2080Ti to under water full custom build. My temps reaches max 48-49 max 50. But when im playing cod for example in the menu of the game. I see it goes to 1950mhz why im losing 15hz? Its not even reaching the temp for boost clock 51c.

U cant see the white stuff on the jet plate?

Im not sure if thats a sarcastic answer or u really tryna help. Either way i appreciate your reply. But its my first loop and kinda worried about the white stuff.

Whats that on my jet plate any idea?

So i filled my system last week and noticed theres some tube residue in my middle cpu fins at the bottom. My temps are good but my anxiety couldnt accept the fact they are there. I drained the system and cleaned every fitting,adapter, and tube with distilled water. But i didnt bother flushing the rads as they were already flushed before, and i thought emptying is enough. I filled the system again yesterday i see the same practicles kinda less in the middle cpu fins same spot. Temps are good. Should i bother emptying again or should i wait for my regular 6 month maintenance? I tried to make the picture clear but i couldnt because it was hard to capture them rgb on or off.

So i have this build for almost 3 days now. And i had a big airbubble in the cpu block. And that bubble was gone yesterday and it gave me that mark on the cpu block is that something to be concerned about?

very high coolant temp? So i finished my build yesterday, acrylic. i have the li xl case. and my room ambient temp is 76F. i have 3 fans intake and 6 exhaust. i know some of yall gonna say this is bad but according to my research the difference is minimal. i have 3 corsair HD fans and the rest of the 6 fans are corsair ML pro rgb. im getting good temps during gaming. like 50c cpu and 45c gpu. but my coolant temp keeps rising till like 41c i havent played for long to see how high it reaches but got me realy worried. i have a fan curve for coolant temp to rise with the coolant. my fans are 100% blasting. is this bad or what's going on? specs i9 9900k. evga rtx 2080 ti. 64gb corsair vegeance pro.3 corsair radiator 2 360 and 1 240. i have the ek quantum kinteic tbe 300 pump/resevoir combo. not overclocked system only xmp is on. i have high performance mode selected in power options not sure if that's what u meant. and indigo cryofuel by ek is my coolant. and my cpu is ek velocity. and for the gpu ek vector ftw3 rtx 2080 TI.

So i flushed my radiator 3 days ago. But because my luck is bad i ran out of tubing, i ordered new tubing and they are coming next week tuesday. Do i need to flush again or no need? The rads are brand new

So i own the ek tubing and the ek torque fittings and i always chamfer my tubes really good before installation. Its just i noticed when installing the tubing i get scratches like that when securing the fitting. https://i.imgur.com/wn48FPq.jpg i noticed on multiple tubes in my build. Im using acrylic. Is that something should i be worried about? When installing the tubes i can hear the tubes slides past the o ring so i know its secured.

Lol thats brand new rad. Nah i mounted them.

Is it normal for rads to have corrosion u got me worried a little

I flushed my rads today, anyway whats those dots inside? Is there normal for a rad to look like that? They are brand new.

Well i have a big ac central unit, and everytime it runs in my house i get briefly light dim for literally half a second, i know thats normal behavior because of the inrush current, but im just wondering how will my pc take these kind of behavior even its half a second because my ac does that frequently turning on and off, so its everyday thing. And i thought a ups will protect my pc from that?

I have my gaming pc psu is 1200watt. I know my pc doesnt consume that much. But how much va should i go for ups 1500va?

Need some help! So i have an ekwb gpu block, planning to buy a cpu ek block, and i have an ek quantum pump resevoir. They all use an addressable rgb header. I have in my motherboard only 2 now. Connected for the case and the gpu block. Whats left is the pump and cpu. What are my options?

They are not even close to being sharp.

I have anxiety over anything since its my first build. Does this scratches cause any harm or leak? I have it on some of my tubing due to fitment try out. This is acrylic. Is it safe to use them? I wont use them anyway since they gonna on the inside of the fitting. https://imgur.com/a/t2edzUv

I noticed on my 2080 Ti pcie slot. One of those golden lines some of them peeled off? Is that a problem?

This is the worst fitting i had ever dealt with, anyway, because of the short tube the fitting scratches the tube. I did it soo many times that i almost lost a full tube for waste. If the scratches are only for looks and they dont burst under water pressure ill keep it here's the picture https://imgur.com/a/fpHrLIR

I used thermal grizzly non conductive, im good

I just put my gpu block together, and thats much paste i used. I put the whole gpu together? If it spreads to the board does it hurt anything?

Okay so its my first loop and need some help, so i set my heat gun im using acrylic btw, so i heat up my heat gun at low temperature which is 750F the lowest, ofc i have my tube at a distance and not close, i take my time roating slowly. When the tube gets hot i make the 90• angle https://imgur.com/gallery/7uPRF7J and thats how my tube looking after i finish? Wobbly at the side. The 90• is perfect, but the sides are a bit fat and wobbly. I found the only way to get rid of those fat sides is when the tubes are hot, i psh the tube beside a table at both sides. I watched a couple of youtube videos and they all bend by hand no pushing and nothing crazy? What am i doing wrong? Because i literally checked every guide out there, im not overheating and spreading the heat perfectly across the tube and taking my time.could this be a silicon cord issue not snug enough? Because my silicon cord is off by 1mm and not snug fit