TomasFer

No1 knows?

Hey guys, there is something really wierd going on with my card, Ive got a 2070 super, when I am plaing valorant I check CPU Mhz and I get 1600-1700, (its overclocked and it should get 2070), the wierd thing is that when i alt tab off the game the card goes up to 2070 mhz and uses more gpu % on valorant. So im getting more power off the gpu when im alt tabbed than when in the game LOL. Thanks in advance, Tomas Fer

Hey! So just the tiittle says it all, when I open a program in this case Rocsience utility software it asks to install the latest SafeNet runtime drives, when I clock on the install (as I allows me to install them from there), it load for like 10 secs and I get blue screen 'Page fault in non page' and 'aksfridge.sys'. I dont know what do to, I read about changing some values on registry but there is no aksfridge there, please help! its for a work program thanks in advance Tomas

did the powerlimit thing, If i do more overclock i get lower confidence level on MSI, is that a thing i should guide on?

I did already brother, the problem is other, the values fluctuate a lot, before they were still and at max, also now im getting lower max mhz at high load.

Hey! Ive got a 2070 S zotac twin fan, on a i5 9400f, I overclocked the card to +130 on core clock and +1000 on memory clock and it was running all stable with no problems, I had the GPU on MSI afterburner always at 2040Mhz and memory on 8001 Mhz, as I will say it again ALWAYS on those values, it didnt fluctuate at all. After a reset I did to my computer now that I go on MSI afterburner the GPU and memory Mhz fluctuate a lot, on low load low mhz on high load high mhz, the thing is that now I never get back to 2040 and 8001 mhz, core and memory respectively. I know its good that the GPU isnt always at max performance for power issues, but I want it to go back to normal(before reset), stuck at 2040mhz on core and 8001 mhz on memory. I can even see a difference between my games FPS outcomes before the reset and after. Also, when I run the OC scanner on MSI afterburner I get +85Mhz, where before the reset I would get +120Mhz on the same test. I dont know if there is a setting that keeps values stuck, that I maybe had on before the reset. Thanks for the help in advance. EDIT: What Ive seen on some videos of overclocking is that the base arrows and the boost arrows move, so according to the values before reset 2040-130 = 1910 mhz, and now im getting to arroud 2010, so that moves the base arrows down to 1950 - 130 = 1820 mhz, and there is the problem, in addition to the fluctuation on the values which wasnt there before. Tomas

But i reseted it, I formated the PC with my own will, nothing got reseted by an error or anything, do you know how to help or...?

What do you mean by what, before reset the card had consistent numbers

The thing is that before reset it got to higher speeds (2040 mhz) and I know downclocking with no load is good powerwise, but why did it change on the first place, before it wasnt like that

Hey! Ive got a zotac 2070 super twin fan, the problem is I resetted my pc, before the reset I used msi afterburner to get the card from 1905 mhz to 2040 mhz (+130 on core clock) and from 7001 mhz to 8001mhz (+1000 memore clock) the thing is that after the reset I want on msi after burner, put the same values (+130 and +1000) but i get max 1910 mhz and 7001 mhz, also the values fluctuate a lot, like right now with no usage values are at 700 core and 800 memory, which wasnt the case before, the values were always on minimum 1700 mhz core and always 80001 mhz memory. Im sure there is a setting for it but I did it long time ago so i dont know how to do it again. So here, on the picture if you take a look at the arrows for base and boost, before reset the base was a lot to the left, closer to the boost one, that is the maximum speed i got when using the overclock scanner from MSI, even tho these speed is not low at all, I would like it to go back to normal. Thanks for anyone helping in advance!

please delet post, posting it againt with some pictures to explain

Anybody knows?

Hey! Ive got a zotac 2070 super twin fan, the problem is I resetted my pc, before the reset I used msi afterburner to get the card from 1905 mhz to 2040 mhz (+130 on core clock) and from 7001 mhz to 8001mhz (+1000 memore clock) the thing is that after the reset I want on msi after burner, put the same values (+130 and +1000) but i get max 1910 mhz and 7001 mhz, also the values fluctuate a lot, like right now with no usage values are at 700 core and 800 memory, which wasnt the case before, the values were always on minimum 1700 mhz core and always 80001 mhz memory. Im sure there is a setting for it but I did it long time ago so i dont know how to do it again. Thanks for anyone helping in advance! :)

This is the error code. Error code:BLZBNTBGS000003F8

Holy fuck! Im sorry but Jesus, everytime I play warzone I get disconnected to BLZ0000.... error, I dont know what do to do, I already port fowarded on my firwall and on my router, I know a lot of people have this problem, so I would like to know if anyone has fixed it for good, with a super op trick. Thats it, thanks.

ye i look at videos or different stuff on chrome ye i look at videos or different stuff on chrome, got any browser on mind?

cpu is at 100% ram is at 75%, what can i do, do lower it?

Hey! I dont know if this is the right section, is not, please tell me. So the problem is that when I play warzone and I alt tab to watch a video or something meanwhile the match starts, its nearly impossible for other stuff to work, the videos stutter like hell, opening windows take a lot, but the game runs perfect. Specs: i5 9400f 2070 super 500gb ssd 250gb mvme 2.0 16gb ram 2x8 2666hz Please help!

Yes it was the tightness and the spea of the paste. It is solved already, works perfectly. Thanks!

Hey! I just installed a new gammax gt air cooler, and there is a problem, i was getting 84C max temperature on full load now im getting 98C, which is really worrying, I did everything correctly, I see the cooler working, the only problem I could see is when applying thermal paste, the cooler came with a sachet not with a sirynge-like applier, so maybe the thermal paste didnt apply uniformly, other than that, i dont know if maybe the fan was installed in the incorrect way, but I followed youtube videos and the instructions manual, and everything was according to that, please help. Thanks in advance spec: i5 9400f 2070 super 2x8 kingston hyperx fury rgb b365m tuf gaming mb511 coolermaster

Card gets to maximum 59C on highest load, im not sure about the fans in the front, ill try changing the curve too.

Its a cooler master mb511, it has three fans in the front and one in the back, it also has a top meshed panel, but no fans there

nothing ingame changed, just the monitors, what do you think about the T, are they to worry about?

Hey everyone! Thanks in advance if you happend to help me. The problem is I used MSI Afterburner to overclock my GPU, I used the OC scanner, Benchmarks and trial and error, so I ended up with any method with the same overclock values, 110-120 Mhz for core clock and 950-1000 Mhz for memory clock, all of this ofcourse with no core voltage manipulation, the only additional thing I did was change the fan curves so they were a little bit more agressive. The first days nothing wrong happened, I got my extra FPS playing Warzone at an avarage CPU temperature of 72 with 77 max, but now im getting 77 avarage with 84 max (all this in celcius), now I changed the settings on the afterburner to default, and Im getting 77 avarage with 81 max, still above of what was before. I already bought a gamaxx gt air cooler which should be arriving home in a week, and it should lower the T a bit, but still I think these T are high and I dont know how to make them go back to what they were. PD: I just thought of something that could make a little bit of more CPU work making it get higher T, I had a 1366x720p 60hz monitor and yesterday I bought a 1920x1080p 144hz monitor, now im running dual monitors, that might be it, right? Spec: i5 9400f gtx 2070 super Thanks!

Thanks! I opened the behind of the case and found this one, this should be the molex from the power suply right? or could it come from somewhere else